Contents 1 Important 2 Safety 2 3 Notice 2 Your Micro Music System 4 Introduction 4 What's in the box 4 Overview of the main unit 5 Overview of the remote control ~~ 6 3 Get started 8 Connect speakers 8 Connect power 8 Prepare the remote control 9 Power on 9 Set the clock 9 4 Play 0 Play from disc 10 Play from USB 10 Control play 10 Skip tracks 0 Program tracks mn Play from Bluetooth-enabled devices n § Listen to FM radio 2 Tune to a radio station 12 Store radio stations automatically 12 Store radio station
1 Important Safety Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. CAUTION mSKoFEECTRESHOOK ‘Cotonou CUT TO EE TEAR SEETHE WoT hs This ‘bolt of lightning’ indicates insulated material within the device may cause an electrical shock For the safety of everyone in your household, please do not remove the covering.
Notice Any changes or modifications made to this device that are not expressly approved by MMD Hong Kong Holding Limited may void the user's authority to operate the equipment. Compliance Hereby, TP Vision Europe B.V. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/ EU. You can find the Declaration of Conformity on www.philips.
Cara for your product + Do not insert any objects other than discs into the disc compartment. + Do insertions warped or cracked discs into the disc compartment. * Remove the discs from the disc compartment if you are not using the product for an extended period of time. + Only use microfiber cloth to clean the product. This apparatus includes this label: Note + The type plate ts located on the back of the product.
Overview of the main unit @ © MIRO HUB SYSTEM sees (D LED indicator ® a « Standby indicator: turns red + Open or close the disc when this product is switched to compartment. standby. ® rn » Bluetooth indicator: turns + Start or pause play. blue to indicate the Bluetooth connection status. = @o = Stop play. Switch this product on or to phase a program standby. fo ous next track Dis! previous/next track. ®. How Current status. Search within a track/disc. + Tune to a radio station.
(® SOURCE/PAIRING + Press to select a source: DISC, USB, TUNER, AUDIO Bluetooth mode, press and hold for more than 2 seconds to disconnect the currently connected devic® and enter pairing mode. AUDIO IN + Connect external audio devices. @ =~ «Connect USB storage devices. ® Volume knob + Adjust volume. (® SPEAKER OUT socks + Connect with the speakers. FM antenna + Improve FM radio reception.
« Tune to a FM station. « Adjust time. (& MODE = Select shuffle mode to play tracks randomly. « Select repeat mode to play a track or all tracks repeatedly. (© ALBUM/PRESETA/V « Select a preset radio station. « Skip to previous/next album. @ INFO « Display playback information. SLEEP/TIMER « Set sleep timer. + Set alarm timer. ® c Lock = Set the clock. = View clock information. * In standby, press and hold to toggle clock display on or off. PROGNOSTIC «Program tracks. Program radio stations.
3 Get started ie Caution * Use of controls or adjustments or performance of procedures thee than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Connect speakers * Insert the stripped portion of each speaker ‘wire into the socket completely. * For better sound quality, use the supplied speakers only. 1 For the right speaker, find the sockets on the back of the main unit marked "R*.
Prepare the remote control BE Caution * Risk of product damage! When the remote control is not used for long periods, remove the batteries. * Batteries contain chemical substances, so they should be disposed of properly. * The product switches to standby mode after 15 minutes inactive. * To achieve the efficient energy saving performance, unplug any textual electronic device from the USB port when the device is not in use. To insert the remote control battery: Open the battery compartment.
4 Play Play from disc 1 Press Cato select CD source. 2 Presto open the disc compartment. 3 Insert a disc with the label side up. 4 Presto close the disc compartment. =» Play starts automatically. If not, press hIL 0 0 =—1=3 Play from USB Note * Make sure that the USB device contains playable audit content. 1 Insert a USB device into the = socket. 2 Press USB to select the USB source. Play starts automatically. If not, press Control play > Start, pause, or resume play. n Stop play.
For MP3 disc and USB: 1 Pressa/wioselectanalbumora folder. 2 Pressurization electrostatic ora file. Program tracks This function allows you to program 20 tracks in the desired sequence. 1 Unstop mode, press Prognosticator activate the program mode. ww [Poises displayed. For MP3 tracks, press select an album. 2 3 Press leq / topi select a track, and then press PROGNOSTIC to confirm. 4 Repeat steps program more tracks. 5 Press» lit play the programmed tracks. To erase the program Press m twice.
4 Play audio on the connected device, Audio streams from your Bluetooth enabled device to this product. To disconnect the Bluetooth-enabled device: » Deactivate Bluetooth on your device. + Press and hold PAIRING for 2 seconds to enter pairing mode. 12 EN 5 Listen to FM radio Tune to a radio station Position the antenna as far as possible from TV, or other radiation source. * For optimal reception, fully extend and adjust the position of the antenna. 1 Press FM to select FM source.
Store radio stations manually 1 Tune to an FM radio station. 2 Press PROGNOSTIC to activate program mode. ww [POT is displayed. 3 Press a/ Vio allocate a number from 1-10 to this radio station, and then press PROGNOSTIC to confirm. 4 Repeat steps 1-3 to program more stations. + To overwrite a programmed station, store another station in ts place. Select a preset radio station In FM mode, press A / ¥to select a preset number. 6 Adjust sound The following operations are applicable to all supported media.
7 Other features Set the alarm timer This product can be used as an alarm clock. You can select the disc, radio, or .mp3 files on a USB storage device as alarm source. Noe * Alarm timer is not available in AUDIO IN mode. If CD/USE source is selected, but no disc is placed or no USB device is connected, the radio source is selected automatically. 1 Make sure that you have set the clock. 2 In standby mode, press and hold SLEEP/TIMER for more than 2 seconds. 1» The hour digits blink.
o — upon Compatibility of this product with all 000 devices is not guaranteed. >@e a Charge our devices With this micro music system, you can charge your external devices, such as your cell phone, MP3 player or other mobile devices. 1 Use a USB cable to connect the USB socket of this product with the USB socket of your devices. 2 Connect the product to power. L» Once the device is recognized, the charging starts.
8 Product information Note Product information is subject to change ‘without prior notice. Specifications * Rated output power (Amplifier): «Total 18W {max.) + Acoustic frequency response: 66Hz kHz * Speaker driver: 2x 3" full range 60; » Bass enhancement: 2 X bass port s Support disc type: CD-DA, CD-R, CMDR, MP 3-CD (8/12 cm) + Bluetooth version: V4.2 + Bluetooth supported profiles: AVDP V1.3, RCPT V1.6 + Bluetooth frequency band / Output power: 2402GHz ~ 2.
Supported MP3 disc formats + 1509660, Juliet * Maximum title number: 128 (depending on file name length) + Maximum album number: 99 + Supported sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz + Supported Bit-rates: 32-256 (bps, variable bit rates 9 Troubleshooting ne ‘Naming * Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service.
source with the remote control instead of the main unit, Reduce the distance between the remote control and the unit. Insert the battery with its polarities signs} aligned as indicated. Replace the battery. Aim the remote control directly at the sensor on the front of the unit. No disc detected Insert a disc. Check if the disc is inserted upside down. Wait until the moisture condensation at the lens has cleared. Replace or clean the disc. Use a finalized CD or correct format disc.
How to keep clock display on or off in standby? = In standby, press and hold CLOCK to toggle clock display on or off.
Specifications are subject ta change without notice 2020 Philips and the Philips Shield Emblem are registered trademarks of Nondrinker Philips N.V. and are used under license. This product has been manufactured by and fs sad under the responsibility of MMD Hong Kong Holding Lifted o one of fts affiliates, and MMD Hong Kong Holding Limited is the warrant or In relation to this product. TAM3205_12_UM_V1.