Always there to help you Register your product and get support at www.philips.
1 Important Safety Notice 2 Your Spotify Multiroom Speaker Introduction What’s in the box What else you need Overview of the main unit 2 2 2 4 4 4 4 5 7 Product information Specifications 21 21 8 Troubleshooting 22 9 Appendix: Understand meanings of LED colors 23 3 Prepare 6 Download SpeakerSet Multiroom Manager to your iOS or Android device 6 Connect power and switch on 6 4 Connect SW750M to your home Wi-Fi network Option 1: Set up through an iOS device Option 2: Set up through an Android devic
1 Important Safety • • • • • Only use attachments/accessories specified by the manufacturer. Use only power supplies listed in the user manual. The product shall not be exposed to dripping or splashing. Do not place any sources of danger on the product (e.g. liquid filled objects, lighted candles). Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• Never remove the casing of this apparatus.
English Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
2 Your Spotify Multiroom Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
English Overview of the main unit a b c d a b • • / e fg Skip to the previous/next song. Start or pause music play. c +/• Adjust volume. d System status indicator • Show the current status of the speaker. e DC IN • Connect the power adaptor. f SETUP button/indicator • Enter App-Assisted Wi-Fi Setup mode for connection of the speaker to a Wi-Fi network. • Show the Wi-Fi setup status. g WPS button/indicator • Enter WPS Setup mode for connection of the speaker to a Wi-Fi network.
3 Prepare 2 On the initial setup page, tap Setup a new speaker. Always follow the instructions in this chapter in sequence. Download SpeakerSet Multiroom Manager to your iOS or Android device 1 (For iPod touch/iPhone/iPad users) Install SpeakerSet from Apple App Store, and then run the app. Connect power and switch on Caution •• Risk of product damage! Make sure that the power (For users of Android smartphones or tablets) Install SpeakerSet from Google Play Store and then run the app.
English »» The system status indicator on the front panel blinks amber during bootup. »» If a Wi-Fi connection has been set up for the speaker, the system status indicator turns solid green after successful connection. Tip •• The speaker enters standby mode automatically after 15 minutes of inactivity.
4 Connect SW750M to your home Wi-Fi network Before connection of SW750M to your home Wi-Fi network, make sure that: To connect SW750M to your existing home Wi-Fi network, you need to apply your home Wi-Fi settings to SW750M in one of the following ways (depending on the type of your smart device and whether your Wi-Fi router is WPS enabled): * If your Wi-Fi password contains such special characters as #/:/;/’, you need to change your password.
1 2 Before setup, make sure that your iOS device is connected to your home Wi-Fi network. 3 4 Tap Next on the above app screen, and then read how to proceed with network setup. Select Wireless (WI-FI) under HOW DO YOU WANT TO CONNECT?. As instructed on the app, press and hold SETUP on the back of SW750M for more than 3 seconds. »» Both the system status indicator on the front panel and the Wi-Fi status indicator on the SETUP button turns solid amber.
Option 2: Set up through an Android device 1 2 Before setup, make sure that your Android device is connected to your home Wi-Fi network. As instructed on the app, press and hold SETUP on the back of SW750M for more than 3 seconds. »» Both the system status indicator on the front panel and the Wi-Fi status indicator on the SETUP button turns solid amber. 3 4 5 6 7 Tap Next on the above app screen, and then read how to proceed with network setup. Select Wireless (WI-FI) under HOW DO YOU WANT TO CONNECT?.
1 2 Press the WPS button on your home Wi-Fi router. English Option 3: Set up wireless connection to a WPS router directly WPS As instructed on the app, press and hold WPS on the back of SW750M for more than 3 seconds. »» The Wi-Fi status indicator on the WPS button blinks green. 3 Wait until successful connection of the speaker to your home Wi-Fi network. »» The speaker beeps. »» The Wi-Fi status indicator on the WPS button turns off.
Option 4: Set up through a PC/Mac (advanced) 1 2 3 4 5 6 1 Go to your Wi-Fi enabled PC/Mac. Press and hold SETUP on the back of SW750M for more than 3 seconds. »» Both the system status indicator on the front panel and the Wi-Fi status indicator on the SETUP button turns solid amber. Select :) Philips Setup from the list of available Wi-Fi networks on your PC/Mac. After successful connection, open a web browser on your PC/Mac. Enter http://philips.speakers or 172.24.0.
Rename the speaker as you like. 4 Tap Done to confirm.
5 Play 3 Tap the Connect icon screen. on the play Enjoy Spotify music services through SW750M Note •• With Spotify, you can enjoy unlimited music on your new device. Thanks to the Spotify Connect feature, you can play and control all this music wirelessly. Choose music on your mobile or tablet, and hear it on your brand new device. •• Make sure that the speaker is connected to your home Wi-Fi network with Internet connection available.
Tip •• See the SpeakerSet app screen for more advanced settings. Group and ungroup speakers 1 2 3 English 5 Stream music to the speaker. During play, you can: • press on the speaker to pause/ resume music play. • press / on the speaker to skip to the previous/next song. • press +/- on the speaker to adjust volume level. Connect multiple Spotify Multiroom Speakers to your home Wi-Fi network (see ‘Connect SW750M to your home Wi-Fi network’ on page 8).
4 5 6 16 Tick circles beside the speakers to add them into the group. Tap > beside the group name to enter the edit page. Edit the group name as you like on the edit page. EN 7 Tap the check mark at the top right on the above app screen, and then wait for more than 10 seconds until the grouping finishes. To ungroup speakers: 1 2 Tap beside the main speaker. Untick the box beside the speaker to be removed from the group.
1 2 On the home page, tap the icon of the main speaker on the SpeakerSet app screen. To adjust volume of all speakers in a group at the same time: 1 Tap Go Spotify app to play music to switch to the Spotify app. 2 3 4 5 Open the SpeakerSet app, then tap on the main page to enter the volume adjustment page. Move the group volume slider to adjust volume of all speakers in the group at the same time. Log in to your Spotify premium account. Tap the Connect icon main speaker.
To adjust volume of an individual speaker: • Press +/- on the top panel of the speaker. • Open the SpeakerSet app, then move the slider beside the speaker on the above volume adjustment page directly. To play/pause music play: • Press on the top panel of any speaker in the group or use controls on the Spotify app screen directly. Tip •• On the volume adjustment page of the SpeakerSet app, you can also tap beside a speaker to mute/unmute its volume output.
5 Tap Factory reset to enter the factory reset page. English 6 Other features Restore factory settings In some cases, you may need to reset the speaker, for example, when you need to reset the Wi-Fi settings or log out from the current Spotify premium account. 1 2 3 4 Make sure that SW750M is powered on and connected to the same Wi-Fi network as your smartphone or tablet. Make sure that your home Wi-Fi network is connected to the Internet. Run SpeakerSet on your iOS or Android smartphone or tablet.
Upgrade firmware 5 Tap Firmwareupgrade to enter the firmware upgrade page. To improve the performance of SW750M, Philips may offer you new firmware for upgrade of your SW750M. Warning •• Always connect your SW750M to AC power for firmware upgrade. Never power off your SW750M nor close the app during firmware upgrade. 1 2 3 4 Make sure that SW750M is powered on and connected to the same Wi-Fi network as your smartphone or tablet. Make sure that your home Wi-Fi network is connected to the Internet.
Frequency range WPS PBC (one button push) Note 2412 - 2462 MHz (CH1CH11) (for /79, /37, /55, /97) 2412 - 2472 MHz (CH1CH13) (for /12, /10, /05) Yes •• Product information is subject to change without prior notice.
8 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
9 Appendix: Understand meanings of LED colors 1 3 1 1 blinking green quickly 1 blinking green slowly 1 1 a 1 dimmed by 50% in solid green 1 c 1 blinking amber quickly, and 3 blinking green 1 solid green 1 solid red 1 1 blinking red 1 b 1 a System status indicator (on the front panel) 2 1 b SETUP indicator (on the back panel) c WPS indicator (on the back panel) LED colors No light 1 blinking amber slowly 1 blinking amber quickly 1 1 1 LED behavior 2 1 and 2 indicators in solid ambe
Open Source Declaration for Philips SW700M/SW750M/SW100M ALAC FLAC Iperf jQuery JSBN 1.2 Jungo USB DFU Driver Marvell WPS2 Client mDNSResponder OpenSSL RSA MD5 zlib getopt Mongoose Tremor ALAC http://alac.macosforge.org/ The Apple Lossless Audio Codec sources are available under the Apache license. Details can be found here http://www.apache.org/licenses/LICENSE-2.0. FLAC https://xiph.org/flac/license.
The reference implementation libraries are licensed under the New BSD License. In simple terms, these libraries may be used by any application, Open or proprietary, linked or incorporated in whole, so long as acknowledgement is made to Xiph.org Foundation when using the source code in whole or in derived works.
Neither the names of the University of Illinois, NCSA, nor the names of its contributors may be used to endorse or promote products derived from this Software without specific prior written permission. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software.
http://www.opensource.apple.com/source/mDNSResponder/mDNSResponder-320.10.80/ The majority of the source code in the mDNSResponder project is licensed under the terms of the Apache License, Version 2.0, available from:
* the merchantability of this software or the suitability of this * software for any particular purpose. It is provided "as is" * without express or implied warranty of any kind. * * These notices must be retained in any copies of any part of this * documentation and/or software. Zlib http://www.zlib.net/ /* zlib.h -- interface of the 'zlib' general purpose compression library version 1.2.
Mongoose https://github.com/cesanta/mongoose/ Mongoose is released under commercial and GNU GPL v.2 open source licenses. The GPLv2 open source License does not generally permit incorporating this software into non-open source programs. For those customers who do not wish to comply with the GPLv2 open source license requirements,Cesanta Software offers a full, royalty-free commercial license and professional support without any of the GPL restrictions. Tremor http://wiki.xiph.org/index.
2015 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. SW750M_UM_EN_V3.