Register your product and get support at PhotoFrame SPF1017 SPF1027 EN User manual
1 Important 2 Safety 2 Safety precautions and maintenance 2 Notice 2 Declaration of Conformity 2 End of life disposal 2 Recycling Information for Customers 3 Compliance with Electro-Magnetic Field (EMF) 3 Recycling 3 North Europe Information (Nordic Countries) 4 Banned Substance Declaration 4 2 Your PhotoFrame Introduction What’s in the box Overview of your PhotoFrame 3 Get started Install the stand Connect power Turn on the PhotoFrame Connect a storage device Connect a PC/Mac 4 Photo Play photos Manag
1 Important Safety Any operation expressly prohibited in this manual, any adjustments, or assembly procedures not recommended or authorised in this manual shall void the warranty. Safety precautions and maintenance • • • • • • • • • • Never touch, push, rub or strike the screen with hard objects as this may damage the screen permanently. When the product is not used for long periods, unplug it. Before you clean the screen, turn off and unplug the power cord.
Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. • (For customers in Canada and U.S.A.) Dispose of in accordance to local-state and federal regulations. For additional information on recycling contact www.eia.org (Consumer Education Initiative). Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization’s product, service and activities.
North Europe Information (Nordic Countries) VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
E n g lish 2 Your PhotoFrame Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With Philips Digital PhotoFrame, you can display JPEG photos in high quality directly from your memories cards.
Overview of your PhotoFrame a b c l d e f g h a • Turn on/off the PhotoFrame • Toggle between slideshow mode, thumbnail mode, and main menu b c j k f • g Slot for a USB flash drive Kensington lock h • Slot for a USB cable to PC / / / • Select the previous/next/right/left option i • j DC • Socket for the AC-DC power adaptor d • • Play photos in slideshow mode, browse mode, or clock mode Pause slideshow Confirm a selection • Enter/Exit photo menu e 6 i EN SD/MMC/xD/MS/MS Pro • Slot f
Connect power E n g lish 3 Get started Note Caution • When you position the PhotoFrame, ensure that the power plug and outlet are easily accessible. • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
Connect a storage device To remove a storage device: • For xD/SD/MMC/MS/MS Pro card, push the card inward and then pull it out. Caution a • Do not remove a storage device from the PhotoFrame when files are transferring from or to the storage device.
On PC: Connect the supplied USB cable to the PhotoFrame and to a PC/Mac. E n g lish 1 » You can drag and drop JPEG photos from the PC/Mac to the internal memory of the PhotoFrame. 2 After all copy and save actions are complete, disconnect the USB cable from the PC/Mac and the PhotoFrame.
4 Photo Manage photos/slideshow You can manage a photo or set slideshow setting in slideshow/thumbnail mode. Play photos 1 1 In the main menu, select [Photo] and then press to confirm. 2 Select a photo source, and then press to confirm. In slideshow/thumbnail mode, press . » Photo menu is displayed. Copy a photo Caution • Never remove a storage device before the copy or delete action completes. 3 Select a photo, and then press confirm. 1 In [Photo Menu], select [Copy To] and then press to confirm.
2 Select an option, and then press confirm. to E n g lish Delete a photo Caution • Never remove a storage device before the copy or delete action completes. 1 In [Photo Menu], select [Delete] and then press to confirm. Select a photo frame 2 Select [Yes], and then press 1 In [Photo Menu], select [Frames] and then press to confirm. 2 Press / to select a frame, and then press to confirm. to confirm. Select a photo effect 1 In [Photo Menu], select [Photo Effects] and then press to confirm.
Rotate a photo 1 In [Photo Menu], select [Rotate] and then press to confirm. Tip • Zoom and crop function is only applied to photos over 2 480 x 234 pixel. Press / to select an orientation, and then press to confirm. Select slideshow sequence You can display the slideshow in sequence or randomly. 1 In [Photo Menu], select [Sequence] and then press to confirm. 2 Select an option, and then press confirm. Zoom and crop a photo 1 In [Photo Menu], select [Zoom and Crop] and then press to confirm.
1 In [Photo Menu], select [Frequency] and then press to confirm. 2 Select a transition time, and then press to confirm.
5 Clock Set time and date 1 In the main menu, select [Clock] and then press to confirm. Show clock in slideshow 2 1 In the [Time and Date] menu, select [Slideshow Clock] and then press to confirm. 2 Select [Yes], and then press Select [Time and Date], and then press to confirm. • to confirm. Select [12/24 hr] > [12HR] / [24HR], to confirm. and then press » You can have clock shown in slideshow. Set alarm clock 3 Select [Time] / [Date], and then press to confirm.
In the main menu, select [Clock] and then press to confirm. 5 Select [Day] for an alarm clock, and then press to confirm. 2 Select [Alarm Clock], and then press confirm. 6 Selection an option, and then press confirm. 7 Select [On/Off], and then press confirm. 8 Select [On], and then press to confirm. • To set off an alarm clock, select [Off] and then press to confirm. to » The [Alarm Clock] menu is displayed. 3 4 Select [Time], and then press confirm.
Select a slideshow transition effect 6 Setup Select an on-screen language 1 2 1 In the main menu, select [Setup] and then press to confirm. 2 Select [Transition], and then press confirm. 3 Select an option, and then press confirm. In the main menu, select [Setup] and then press to confirm. Select [Language], and then press confirm. 3 Select a language, and then press confirm.
1 2 3 E n g lish Select a slideshow frequency In the main menu, select [Setup] and then press to confirm. Select [Frequency], and then press confirm. Select an option, and then press confirm. 2 Select [Collage], and then press confirm. 3 Select [Random], and then press confirm. to to to to • To disable collage function, select [Off] and then press to confirm. Display collage photos 1 In the main menu, select [Setup] and then press to confirm.
Select a photo background 1 In the main menu, select [Setup] and then press to confirm. » If you select [RadiantColor], the PhotoFrame extends the color on the edges of a photo that is smaller than the full screen to fill the screen without black bars or aspect ratio distortion. 2 Select [Background], and then press confirm. 3 Select an option, and then press to confirm. » If you select a background color, the PhotoFrame displays a photo with a background color.
3 1 In the main menu, select [Setup] and then press to confirm. 2 Select [Sequence], and then press confirm. 3 Selection an option, and then press confirm. Press / to adjust brightness level, and then press to confirm.
Protect/Unprotect content of a memory card 1 In the main menu, select [Setup] and then press to confirm. 2 Select [Auto Dim], and then press confirm. 3 Select [Auto Dim - End] / [Auto Dim Start], and then press to confirm. 4 Press / / / to set time for auto-on/ auto-off, and then press to confirm. You can enable the delete function on a storage device available on the PhotoFrame. To avoid deleting photos on a storage device, you can also disable the delete function on a storage device.
6 Select [Auto Dim Timer], and then press to confirm. Select [On], and then press to confirm. • To set off auto-on/auto-off function, select [Off] and then press to confirm. 2 Select [Status]. E n g lish 5 » The status of the PhotoFrame is displayed on the right of the screen. Set auto orientation You can display photos in the correct orientation depending the horizontal/vertical orientation of the PhotoFrame. 1 In the main menu, select [Setup] and then press to confirm.
3 Select [On], and then press • to confirm. 3 To set off auto orientation function, select [Off] and then press to confirm. Select [On] to turn on the button sound, and then press to confirm. • To turn off the button sound, select [Off] and then press to confirm. Set button sound Display key hints at power on 1 In the main menu, select [Setup] and then press to confirm. 1 In the main menu, select [Setup] and then press to confirm. 2 Select [Beep], and then press confirm.
Select [On] to display key hints at power on, and then press to confirm. • 3 Select [Yes], and then press to confirm. E n g lish 3 To not display key hints at power on, select [Off] and then press to confirm. Set to factory default 1 In the main menu, select [Setup] and then press to confirm. 2 Select [Factory Set], and then press confirm.
7 Product information Note • Product information is subject to change without prior notice.
E n g lish 8 Frequently asked questions Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the buttons on the back to control the PhotoFrame. Can I switch different slideshow photos by using different memory cards? Yes. When a memory card is connected to the PhotoFrame, you can play photos on the specific memory card in slideshow mode. Will the LCD be damaged, if I keep showing the same photo for a long time? No.
9 Glossary A Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-definition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. J JPEG A very common digital still picture format. A still-picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio.
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. UM_V1.0G_V1.
