Always there to help you Register your product and get support at www.philips.
Contents 1 Important safety instructions Hearing Safety General information 2 2 2 2 Your wireless on-ear headset 3 What's in the box 3 Other devices 3 Overview of your wireless on-ear headset 3 3 Get started 4 Charge your headset 4 Pair the headset with your mobile phone 4 4 Use your headset Connect the headset to a Bluetooth device Manage your calls and music Wear your headset Use with the audio cable 5 Technical data 5 5 5 6 6 7 6 Notice 8 Declaration of conformity 8 Disposal of your old produc
1 Important safety instructions General information To avoid damage or malfunction: Caution Hearing Safety •• Do not expose the headset to excessive heat. •• Do not drop your headset. •• Headset shall not be exposed to dripping or splashing. •• Do not allow your headset to be submerged in water. •• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.
2 Your wireless on-ear headset Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips wireless on-ear headset, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music; • enjoy music on non-Bluetooth devices with an audio cable. Quick start guide Other devices A mobile phone or device (e.g.
3 Get started Charge your headset 2 3 4 Note •• Before you use your headset for the first time, charge the battery for 5 hours for optimum battery capacity and lifetime. •• Use only the original USB charging cable to avoid any damage. •• Finish your call before charging the headset, as connecting the headset for charging will power the headset off. Connect the supplied USB charging cable to: • the USB connector of the headset and; • USB power source.
4 Use your headset Connect the headset to a Bluetooth device 1 2 Manage your calls and music Call/Music button Task Operation Turn the headset on. Press and hold for 1 second. Turn the headset off. Press and hold for 4 seconds. Press once. Sound or LED indicator • 1 short beep • 3 white flashes: battery low < 25% • 2 white flashes: battery level < 50% • 1 blue flash: battery level > 50% • 1 long beep • 1 long white flash 1 short beep Press once.
Other headset indicator status Headset status The headset is connected to a Bluetooth device, while the headset in standby mode or while you are listening to music. The headset is ready for pairing. The headset is on but not connected to a Bluetooth device. There is an incoming call. Low battery. Battery is fully charged. Indicator Blue LED flashes for every 8 seconds. LED flashes blue and white alternately. Blue LED flashes quickly. Blue LED flashes once per second. White LED flashes. White LED is off.
5 Technical data • • • • • • • • • Minimum 9 hours of music time or talk time Minimum 200 hours of standby time Normal time for a full charge: 3 hours Rechargeable Lithium-Polymer battery (200 mAh) 3.5 mm audio jack for corded headset mode Bluetooth 3.
6 Notice Declaration of conformity Hereby Philips Consumer Lifestyle, declares that the SHB8000 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c. philips.com. This product has been designed, tested and manufactured according the European R&TTE directive 1999/5/EC.
a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Notice for the European Union 0890 Hereby, Philips Consumer Lifestyle, declares that Philips SHB8000 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Trademarks Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
7 Frequently asked questions My Bluetooth headset is connected to a Bluetooth stereo enabled mobile phone, but music only plays on the mobile phone speaker. Refer to the user manual of your mobile phone. Select to listen to music through the headset. My Bluetooth headset does not switch on. The battery level is low. Charge the headset. The audio quality is poor and crackling noise can be heard. The Bluetooth device is out of range.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. SHB8000_UM_00_EN_V1.