Always there to help you Register your product and get support at www.philips.
Contents 1 Important safety instructions Hearing Safety General information 2 2 2 2 Your Bluetooth wireless headphones 3 What's in the box Other devices Overview of your Bluetooth wireless headphones 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music Wear your headset 5 Technical data 3 3 3 4 4 4 6 6 6 7 8 6 Notice 9 Declaration of conformity 9 Disposal of your old product a
1 Important safety instructions General information To avoid damage or malfunction: Caution Hearing Safety •• Do not expose headphones to excessive heat. •• Do not drop your headphones. •• Headphones shall not be exposed to dripping or splashing. •• Do not allow your headphones to be submerged in water. •• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.
2 Your Bluetooth wireless headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips wireless on-ear headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. Other devices A mobile phone or device (e.g.
3 Get started Manual pairing 1 Charge your headphones Note •• Before you use your headphones for the first time, charge the battery for 5 hours for optimum battery capacity and lifetime. •• Use only the original USB charging cable to avoid any damage. •• Finish your call before charging the headphones, as connecting the headphones for charging will power the headphones off. Connect the supplied USB charging cable to: • the USB connector of the headphones and; • USB power source.
1 2 Activate the Bluetooth feature of your mobile phone, select Philips SHB3165/ SHB3185. Enter the headset password "0000" (4 zeros) if prompted. For those mobile phones featuring Bluetooth 3.0 or higher, no need to enter a password.
4 Use your headphones Connect the headphones to a Bluetooth device 1 2 Turn on your mobile phone/Bluetooth device. Press and hold for 2 seconds to turn the headphones on. »» The blue LED flashes. »» The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically. If the last one is not available, the headphones will try to reconnect to the second last connected device. Turn the headphones off. Press and hold for 4 seconds. »» The white LED is on and fades out.
Other headphones indicator status Headphones status The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music. The headphones are ready for pairing. The headphones are on but not connected to a Bluetooth device. Low battery. Battery is fully charged. Indicator The blue LED flashes for every 8 seconds. Tip •• After use, twist the headphones for easy storage. The LED flashes blue and white alternately. The blue LED flashes quickly.
5 Technical data • • • • • • • • 11 hours of music time or talk time 200 hours of standby time Normal time for a full charge: 3 hours Rechargeable Lithium-Polymer battery (230 mAh) Bluetooth 3.
6 Notice Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips. com. Disposal of your old product and battery household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
Trademarks Bluetooth The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations is under license. Siri is a trademark of Apple Inc., registered in the U.S. and other countries. Siri Siri is a trademark of Apple Inc., registered in the U.S. and other countries. Google Google and the Google Logo are registered trademarks of Google Inc.
7 Frequently asked questions The microphone is muted. Press enable the microphone. once to My Bluetooth headphones do not switch on. The battery level is low. Charge the headphones. My Bluetooth headphones are connected to a Bluetooth stereo enabled mobile phone, but music only plays on the mobile phone speaker. Refer to the user manual of your mobile phone. Select to listen to music through the headphones. I cannot pair my Bluetooth headphones with a mobile phone. The Bluetooth is disabled.
2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. UM_SHB3165_3185_00_EN_V1.
