BASS+ SHB3075 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 Your Bluetooth wireless headphones What's in the box Other devices Overview of your Bluetooth wireless headphones 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music Wear your headset 2 2 3 3 3 3 5 5 5 6 6 6 7 5 Technical data 8 6 Notice
1 Important safety instructions Hearing Safety General information To avoid damage or malfunction: Caution •• Do not expose headphones to excessive heat. •• Do not drop your headphones. •• Headphones shall not be exposed to dripping or splashing. •• Do not allow your headphones to be submerged in water. •• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.
2 Your Bluetooth wireless headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. With this Philips wireless headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. What's in the box Quick start guide Other devices A mobile phone or device (e.g.
e Pairing/Mute button f Micro USB charging slot g +/Volume control button 4 EN
3 Get started Charge your headphones Note earliest paired device is replaced by the new one. 1 Make sure that the headphones are fully charged. 2 Press and hold for 2 seconds to turn the headphones on. 3 Press and hold until the blue and white LED flashes alternately. »» The headphones remain in pairing mode for 5 minutes. 4 Make sure that the mobile phone is turned on and its Bluetooth feature is activated.
4 Use your headphones Manage your calls and music On/off Connect the headphones to a Bluetooth device 1 Turn on your mobile phone/Bluetooth device. 2 Press and hold for 2 seconds to turn the headphones on. »» The blue LED flashes. »» The headphones are reconnected to the last connected mobile phone/Bluetooth device automatically. If the last one is not available, the headphones try to reconnect to the second last connected device.
Mute/unmute the microphone in a call. Press once. »» 1 beep. Wear your headset Adjust the headband to fit your head. Voice control Task Siri/Google Now. Button Operation Press and hold for 2 seconds. Other headphones indicator status Headphones status The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music. The headphones are ready for pairing. The headphones are on but not connected to a Bluetooth device. Low battery level.
5 Technical data • • • • Music time: 12 hours Talk time: 12 hours Standby time: 166 hours Normal time for a full charge: 3 hours Rechargeable lithium polymer battery (240 mAh) Bluetooth 4.1, Bluetooth mono support (Headset Profile - HSP, Hands-Free Profile - HFP), Bluetooth stereo supported (Advanced Audio Distribution Profile - A2DP; Audio Video Remote Control Profile - AVRCP) Frequency range: 2.402-2.
6 Notice Notice of compliance Notice for US This set complies with the FCC rules, Part 15 and with 21 CFR 1040.10. Operation is subject to the following two conditions: a This device may not cause harmful interference, and b This device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Disposal of your old product and battery Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or visit www.recycle.philips. com. This product contains non-removable batteries: • Do not incinerate. Batteries may explode if overheated.
7 Frequently asked questions My Bluetooth headphones do not switch on. The battery level is low. Charge the headphones. I cannot pair my Bluetooth headphones with a mobile phone. The Bluetooth is disabled. Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headphones. Pairing does not work. Make sure the headphones are in pairing mode. • Follow the steps described in this user manual (see ‘Pair the headphones with your mobile phone” on page 5).
2017 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. UM_SHB3075_27_EN_V1.
