QP2532, QP2531 QP2530, QP2526 QP2525, QP2522 QP2521, QP2520
13 1 12 2 3 11 10 4 9 8 7 5 6
empty page before TOC
English 6
English Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. General description (Fig. 1) 1 2 3 4 5 6 7 8 9 10 11 12 13 Protection cap Blade Blade release slide On/off button Battery status indicator (QP2532, QP2531, QP2530 only) Small plug Battery charging indicator (QP2532, QP2526, QP2525, QP2522, QP2521, QP2520 only) Supply unit (QP2531, QP2530: type HQ850.
English 7 Danger - Keep the supply unit dry. Warning - To charge the battery, only use the detachable supply unit provided with the appliance. For the type number of the original supply unit, please see ' General description' in the manual. - The supply unit contains a transformer. Do not cut off the supply unit to replace it with another plug, as this causes a hazardous situation.
English Caution - Never immerse the charging stand in water and do not rinse it under the tap. - Do not use the supply unit in or near wall sockets that contain an electric air freshener to prevent irreparable damage to the supply unit. - Only use this appliance for its intended purpose as shown in the user manual. - For hygienic reasons, the appliance should only be used by one person. - Never use water hotter than 60 °C to rinse the appliance.
English 9 QP2526, QP2525, QP2522, QP2521, QP2520: Charging normally takes approx. 8 hours. A fully charged appliance has an operating time of up to 60 minutes (QP2532, QP2531, QP2530) or 45 minutes (QP2526, QP2525, QP2522, QP2521, QP2520). Charge the appliance before you use it for the first time and when the battery charge indicator indicates that the battery is almost empty. Battery status indicator QP2532, QP2531, QP2530: When the battery status indicator flashes orange, the battery is almost empty.
English Charging with the supply unit 1 Insert the small plug into the appliance and put the supply unit in the wall socket. 2 QP2532, QP2526, QP2525, QP2522, QP2521, QP2520 only: The battery charging indicator on the adapter lights up continuously when the appliance is connected to the wall socket. 3 After charging, remove the supply unit from the wall socket and pull the small plug out of the appliance.
English 11 Shaving Warning: Before you use the appliance, always check the blade for damage or wear. If the blade is damaged or worn, do not use the appliance, as injury may occur. Replace a damaged blade before you use the appliance (see 'Replacement'). Shaving tips and tricks - Make sure that the blade is in full contact with the skin by placing it flat on the skin. - For the best result, move the appliance against the grain. - Make long strokes while pressing lightly.
English Edging You can also use both edges of the blade to create sharp lines and perfect edges. Hold the appliance in such a way that the blade is perpendicular to the skin and one of its edges touches the skin. This allows more precise detailing of sideburns and the area around the mouth and nose. 1 To create sharp edges and lines, you can use either edge of the blade. 2 Switch on the appliance. 3 Place the edge of the blade perpendicular onto the skin.
English 13 - QP2522 and QP2521 come with 2 click-on stubble combs: 5 mm and 1 mm. Start with the 5 mm comb to acquire practice with this appliance. The indication on each comb corresponds to the hair length in millimeters. Trimming tips - Always make sure that the tips of the clickon stubble comb point in the direction in which you move the appliance. - Make sure that the flat part of the comb is always in full contact with the skin to obtain an even trimming result.
English 5 To remove the comb, hold it on both sides and pull it off the blade. Cleaning and maintenance Clean the appliance after every use. Caution: Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Caution: Do not tap the appliance against a surface to remove water from it, as this may cause damage. Replace the blade if it is damaged. Cleaning the appliance 1 Remove the comb from the blade.
English 15 3 If a lot of hairs have accumulated on the appliance, first blow them off. 4 Switch on the appliance and rinse the blade with lukewarm water. Caution: Do not dry the blade with a towel or a tissue as this may cause damage. 5 Rinse the combs with lukewarm water. 6 Carefully shake off excess water and let all parts air dry completely. Note: The blade is fragile. Handle it carefully. Replace the blade if it is damaged.
English 2 Close the protection cap. Replacement Usage indicator For optimal cutting and gliding performance, we advise you to replace the blade every 4 months, when it no longer provides the shaving or trimming results you expect. The blade is equipped with a usage indicator. A green bar will gradually appear on the blade as you use it. When it is highly visible, it is recommended to replace your blade for the best OneBlade experience. Always replace the blade with an original Philips blade.
English 17 3 Hold the new blade on its sides and press it onto the handle (‘click’). Note: When you hear a click, the new blade is placed correctly and ready for use. Ordering accessories To buy accessories or spare parts, visit www.philips.com/parts-and-accessories or go to your Philips dealer. You can also contact the Philips Consumer Care Center in your country (see the international warranty leaflet for contact details).
English Take any necessary safety precautions when you handle tools to open the product and when you dispose of the rechargeable battery. 1 Disconnect the appliance from the mains and let the appliance run until the motor stops. 2 Remove the blade from the appliance. 3 Remove the bottom of the appliance by bending it downwards and pulling it off. 4 Take out the battery compartment by separating the bottom part from the top part. 5 Separate the battery section from the bottom part.
English 19 Warranty and support If you need information or support, please visit www.philips.com/support or read the international warranty leaflet. Warranty restrictions The blade is not covered by the terms of the international warranty because it is subject to wear. Troubleshooting This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, visit www.philips.
English Problem Possible cause The appliance does not work anymore. The Charge the appliance (see rechargeable 'Charging'). QP2531, QP2530: battery is empty. During charging, the battery status indicator flashes. QP2526, QP2525, QP2522, QP2521, QP2520: During charging, the charging indicator on the supply unit lights up.
English Problem 21 Possible cause Solution The blade is placed onto the handle incorrectly. Remove and reattach the blade. Push it onto the appliance until you hear a click. The blade is blocked by dirt. Remove the blade and clean it thoroughly. The appliance The blade is doesn’t function blocked by dirt. optimally anymore. Remove the blade and clean it thoroughly. The blade is Replace the blade with a new subject to wear one (see 'Replacement'). and therefore its performance decreases over time.
Empty page before back cover
© 2019 Koninklijke Philips N.V. All rights reserved 8888.989.2591.
