User manual
9EN
Connect
This section helps you connect your
SoundSphere DesignLine speakers to a TV and
other devices.
For information about how to set up
connections of your SoundSphere DesignLine
speakers and accessories, you can also see the
quick start guide.
Note
• For identication and supply ratings, refer to the type
plate at the bottom of the product.
• Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Connect speaker cables
Note
• For optimal sound, use the supplied speakers only.
1 Unscrew the speaker connectors.
2 Insert fully the end of a speaker cable with
red mark into the left red (+) connector.
3 Screw the left red (+) connector to secure
the cable.
4 Insert fully the end of a speaker cable
without red mark into the left black (-)
connector.
5 Screw the left black (-) connector to
secure the cable.
6 Repeat steps 2-5 to insert the speaker
cable into the right connectors on the
other speaker.