User guide

Features (Cont’d)
SmartLock
Access Code
"o change the access code,
follow these steps.
CbeginJ -------------------------------------
f0> Press the MENU but
ton, then press the
CH(annel) A/T buttons to
select SmartLock.
SmartLock REVIEW
SETUP
Press the VOL(ume) ► or
^ button to continue. The
SmartLock Access Code screen
will appear.
SmartLock
Enter Your Access Code
<i>-
Press the Number but
tons to enter your old access
code. If you have never set up your
personal access code, use 0711.
Press the CH(annel) A/T
buttons to select CHANGE
CODE.Then, press the
VOL(ume) ► or ◄ button to
continue.
SmartLock
BLOCK
CHANGE CODE
<$>-
Use the Number buttons to
enter your desired access code in
the New Code space.Then, enter
the same code in the Confirm
Code space.
Your new access code should be
recorded.You will return to the
SmartLock menu.
f
S / „
New Code
_ _
Confirm Code
V
/
Press the STATUS/EXIT
button.
You cannot J
use the default code
after you set up
your personal access
code.
To restore 0711 as
your personal access
code, unplug the
TV’s power cord for
10 seconds, then
plug it in again.This
is helpful when you
forget your personal
access code.
Volume
T
here are two ways to adjust
the TV's volume. Follow these
steps to adjust the volume using
the on-screen menu.
Or, you can adjust the volume
using the VOL(ume) ►/◄ but
tons on the remote control or
the VOLUME buttons on
the TV.
_(BEGIN).
'-0>
Press the MENU button.
<i>-
<s>
Press the CH(annel)
A/T buttons to select VOL-
UME.Then, press the
VOL(ume) ►/◄ buttons to
adjust the volume level.
"Sharpness
llllliii
34^
TINT
■lllliii
-5
1 VOLUME |||■■■■■
13 1
AVL
OFF
SLEEPTIMER
OFF
Press the
STATUS/EXIT button to
remove the menu.
Smart \ i /
Help
The Volume indi- M
cator should appear on
the screen briefly when
you adjust the volume.
The simplest way to
adjust the volume is by
pressing the VOL(ume)
►/◄ buttons.
Surf
r
(BEGIN)-
If you have a few favorite chan-
I nels, you can set them as Surf
channels.Then, using the SURF
button on the remote control, you
con flip through only the Surf
channels. Follow these steps to set
up the Surf channels.
<i> Press the MENU but-
ton.Then, press the
CH(annel) A/T buttons to
select SURF.
'^EEPTIMER
OFF
CLOCK
►
ISURF A/CH 1
SmartLock ►
SmartLock REVIEW ►
Press the VOL(ume)
►/^ buttons to set SURF
to SURF.
If you set SURF to A/CH (alter
nate channel), pressing the
SURF button will allow you to
switch between the current
channel and the one you chose
just before choosing the cur
rent channel.
'^EEPTIMER
OFF
CLOCK
►
ISURF SURF 1
SmartLock
►
SmartLock REVIEW
►
<i>i
Press the
STATUS/EXIT button.
Use the Number but
tons to select a channel.
Then, press the SURF but
ton. The channel will become a
SURF channel.
\ 1 /
Smart
Help
You can memo- ^
rize eight channels as
Surf channels. If you try
to memorize nine, one
of the other Surf chan
nels will be erased.
Surf channels will be
lost if the power fails
or if you set SURF to
A/CH in the menu.
Closed
Captioning
C
losed Captioning allows you
to read the voice content of
television programs on the TV
screen. Designed to help the
hearing impaired, this feature
uses on-screen text boxes to
show dialogue and conversa
tions while the TV program is in
progress.
Note: Broadcast stations will
often use spelling abbreviations,
symbols, dropouts and other
grammatical shortcuts in order
to keep pace with the on-screen
action. These factors vary with
the source of the captioned text
material and do not indicate a
need for TV service.
___ (BEGIN)-
Press the CC button
repeatedly until the desired
Closed Caption mode
appears on the screen.
You may choose CAPTION I,
CAPTION 2,TEXT I,TEXT 2,
CAPTION MUTE or CAPTION
OFF.
<£>
Notes:
• Usually CAPTION I is the preferred Closed Caption mode.
CAPTION I or 2: Dialogue (and descriptions) for the action
on the captioned TV program will appear on the screen. TEXT
I or 2: A black box appears on the TV screen. If the TEXT
mode Is available with the current TV program, text or informa
tion will appear.
CAPTION MUTE: Closed Captions will appear only when
you mute the volume.
CAPTION OFF: Closed Captions will be completely off.
• Captions and texts may not match the TV voice broadcast
exactly.
• Interference or a weak antenna/cable signal may cause the
Closed Captioning system to function improperly.
• The caption or text characters will not appear if the menu is on
the screen.
• Remember, not all TV programs and commercials are broadcast
with Closed Captioning. Neither are all Closed Caption modes
necessarily being used by a broadcast station during the trans
mission of a program. Refer to your area's TV program listings
for the stations and times of shows with Closed Captioning.
• If a black box appears on the screen, you have selected TEXT I
or TEXT 2.To remove the black box, select CAPTION I, CAP
TION 2, CAPTION MUTE or CAPTION OFF.
Closed ^
Captions will be
delayed briefly when
you mute or adjust
the volume, change
channels, or press
the STATUS/EXIT
button.
_ 7 .