User's Manual

DPM 9400 - User Manual

• Set SP:

Confirm the setting by pressing the Jog Dial and to return to the DPM main menu. For more information on the

recording format, refer to the Recording format section in this manual.

DPM device beep

You can define whether you want the DPM to beep when specific operations take place. Otherwise the DPM is

muted except for warnings, for example, when the batteries are almost empty or the memory card is almost full.

This is the menu entry for the device beep; a check mark next to the symbol indicates that the beep function is

enabled. The symbol always shows the current setting:

Confirm the menu entry selection by pressing the Jog Dial and do the following:

• Enable the device beep; this is the default setting:

• Disable the device beep:

Confirm the setting by pressing the Jog Dial and to return to the DPM main menu.

Setting the microphone sensitivity

The setting for the microphone sensitivity defines the audio input level for the DPM's built-in microphone.

This is the menu entry for the microphone sensitivity; the symbol always shows the current setting:

Confirm the menu entry selection by pressing the Jog Dial and do the following:

• Set the microphone sensitivity to low when recording dictations in a noisy environment :

• Set the microphone sensitivity to medium when recording dictations in a normal environment; this is the

default setting:

• Set the microphone sensitivity to high when, for example, recording at a conference:

Confirm the setting by pressing the Jog Dial and to return to the DPM main menu.

Voice-activated recording

The DPM supports the voice-activated recording mode.

This is the menu entry for voice-activated recording; a check mark next to the symbol indicates that voice-

activated recording is enabled. The symbol always shows the current setting:

Confirm the menu entry selection by pressing the Jog Dial and do the following:

• Enable voice-activated recording:

•

Disable voice-activated recording; this is the default setting:

Confirm the setting by pressing the Jog Dial and to return to the DPM main menu.

For more information on the voice-activated recording mode, refer to the Voice-activated recording section in

this manual.

Backlight on/off

The DPM provides a backlit display for improved visibility.

This is the menu entry for the display backlight; a check mark next to the symbol indicates that the backlit display

function is enabled. The symbol always shows the current setting:

Confirm the menu entry selection by pressing the Jog Dial and do the following: