User manual

22 EN
10 Troubleshooting
Caution
Never remove the casing of this unit.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this unit,
check the following points before requesting
service. If the problem remains unsolved, go to
the Philips web site (www.philips.com/support).
When you contact Philips, ensure that your
unit is nearby and the model number and serial
number are available.
General
No power
Make sure that the AC power plug of the
unit is connected properly.
Make sure that there is power at the AC
outlet.
No sound or poor sound
Adjust the volume.
Check that the speakers are connected
correctly.
Check if speakers are muted. Press MUTE
to restore sound.
Left and right sound outputs reversed
Check the speaker connections and
location.
No response from the unit
Disconnect and reconnect the AC power
plug, then turn on the unit again.
Remote control does not work
Beforeyoupressanyfunctionbutton,rst
select the correct source with the remote
control instead of the main unit.
Reduce the distance between the remote
control and the unit.
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
Replace the batteries.
Aim the remote control directly at the
sensor on the front of the main unit.
No disc detected
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at
the lens has cleared.
Replace or clean the disc.
UseanalizedCDorcorrectformatdisc.
Cannot display some les in USB device
ThenumberoffoldersorlesintheUSB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
Theformatsoftheselesarenot
supported.
USB device not supported
The USB device is incompatible with the
unit. Try another one.
Cannot apply sound effects when playing from
a USB B device.
USB B mode does not support DBB, DSC,
DJ EFFECT or AUTO DJ effects.
Cannot delete les from a USB B device.
USB B mode does not support USB
Delete function.
Poor radio reception
Increase the distance between the unit and
other electrical appliances.
Adjust the position of the antenna for
better reception.