Always there to help you Register your product and get support at www.philips.
Contents Contents 1 Important 2 2 3 2 Your Mini Hi-Fi System 4 4 4 5 6 3 Connect 8 8 8 8 9 9 Safety Notice Introduction What's in the box Overview of the main unit Overview of the remote control Connect FM antenna Connect AM antenna Connect speakers Connect speaker LED Connect power 4 Get started Prepare the remote control Turn on 10 10 10 5 Play from a USB 11 11 11 12 6 Play audio through Bluetooth 13 7 Listen to an external device 15 15 15 8 Listen to radio 16 16 16 16 16 16 Play from
1 Important Safety h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. j Only use attachments/accessories specified by the manufacturer. This 'bolt of lightning' indicates uninsulated material within your unit may cause an electrical shock.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. o Apparatus shall not be exposed to dripping or splashing. p Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). q Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• Never remove the casing of this apparatus.
2 Your Mini Hi-Fi System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.Philips.com/welcome. Introduction With this unit, you can enjoy audio from USB devices, Bluetooth devices or external devices. You can also listen to radio stations through it.
Overview of the main unit y x a w b c d e f g h i j k b c v u t s r l mn a DELETE • In USB A mode, delete audio files stored on a USB device. b • A/B Jacks for USB mass storage devices. opm q h Display panel • Show status. i AUTO DJ • In USB A mode, apply Auto DJ effect automatically. c REC • Record to a USB. j DJ EFFECT • In USB A/Bluetooth/Tuner/Audio in A mode, apply DJ effects manually. d AUDIO IN A/B • Audio input jack (3.5mm) for an external audio device.
n • • • • (Left) In USB A mode, stop playing. In USB A mode, erase programs. Exit the process of recording. In Tuner mode, switch between FM and AM bands. o CROSS FADER ASSIGN • Adjust the left/right channel balance during playback. p (Right) • In USB B mode, stop playing. q Control play panel (right) • Control play for Source B modes (including USB B and Audio in B modes). r Volume dial • Rotate to increase/decrease volume. s t • Turn on the unit or switch to standby mode.
• Exit the process of recording. h ALB/PRESET+/• Skip to the previous/next album. • Select a preset radio station. i MUTE • Mute/unmute volume. j DBB • Turn on or off dynamic bass enhancement. k DSC • Select a preset sound equalizer setting. l USB B • In USB B mode, start or pause play. m USB B • In USB B mode, stop playing. n VOL +/• Adjust volume. o • • / Adjust radio frequency. In USB A mode, search with in a track. p LIGHT • Turn on or off the speaker lighting effect.
3 Connect Connect FM antenna Connect the supplied FM antenna to the FM jack on the back of the main unit. Connect speakers Note •• For optimal sound, use the supplied speakers only. •• Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifications section of this manual. Connect AM antenna 1 Assemble the AM loop antenna. SPEAKERS OUT ( 3 ) Connect the speakers Insert the speaker wires completely into the SPEAKER OUT sockets.
Connect speaker LED Tip •• When you are not using or are transporting the unit, to keep the power cord organized and above the ground, fix the power cable with the cable tie on the back panel of the main unit. 1 2 Find an LED socket on the back of the main unit. Insert the connector of the LED wire to the LED socket. Connect power 1 2 Adjust the voltage selector (locate on the back panel of the unit) to 220-240V. Connect the AC power plug to the power outlet.
4 Get started Note •• If you are not going to use the remote control for a long time, remove the batteries. Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus.
5 Play from a USB Play from a USB A device Delete from a USB device 1 2 3 During play from a USB device, press / to select an audio file. • To delete an audio folder, in the stop position, press ALB/PRESET+/- to select an audio folder. Press USB DELETE. »» A confirmation message is displayed. While the message is displayed, press USB DELETE again to confirm. • To cancel, press . Note •• The function is not available in USB B mode.
• • • Press / to select an audio file. To pause/resume play, press . To stop play, press (right) on the main unit. To search within an audio file, press and hold / , then release to resume normal play. • Play options Repeat and random play 1 2 Press MODE repeatedly to select: • REP-1: the current track is played repeatedly. • REP-ALL: all tracks are played repeatedly. • SHUFFLE: all tracks are played randomly. To return to normal play, press MODE repeatedly until play mode is no longer displayed.
6 Play audio through Bluetooth The unit uses Bluetooth wireless technology to stream music from your Bluetooth device to the system. Search for devices Note •• Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the device. •• The effective operation range between the unit and the paired phone is approximately 10 meters (30 feet). •• Any obstacle between the unit and the phone can reduce the operational range.
NTRX710 »» After Bluetooth connection, you can enjoy audio on your phone through the unit. Tip •• Different devices may have different way to enable Bluetooth function.
7 Listen to an external device You can listen to an external audio device through the speakers of this unit. Listen to an MP3 player 1 2 3 Press AUDIO A to select the MP3 link source. Connect a 3.5mm audio link cable(not supplied) to: • the AUDIO IN A jack (3.5mm) on the unit. • the headphone jack on the MP3 player. Start to play the device (refer to the device user manual).
8 Listen to radio Tune to a radio station 1 2 3 Program radio stations automatically In the tuner mode, press and hold PROG for more than 2 seconds to activate automatic program mode. »» [AUTO] (auto) is displayed. Press TUNER on the remote control, or (Left) on the main unit repeatedly to select FM or AM. »» The unit automatically stores radio stations with sufficient signal strength. »» After all available radio stations are stored, the first stored radio station is broadcast automatically.
9 Adjust volume level and sound effect Apply AUTO DJ effect The AUTO DJ function adds various sound and playback effects to your music automatically: Effects Auto effect Cross fade Back spin Loop Beat box Voice sampling • • • Description Add different sound effects to the music automatically. Fade one piece of music out while fading another piece of music in at the same time. Rewind the music to a previous point. Repeat playing a section of the music. Add beat box effects to the music.
Note •• To reactivate the NX bass effect, press the button again after the 3 stages are completed. • Move the slider bars to adjust the equalizer settings for each of the 5 frequency ranges. Mute sound Adjust volume level 1 During play, press VOL +/- to increase/ decrease the volume level. Select a preset sound effect The DSC (Digital Sound Control) enables you to enjoy special sound effects.
10 Other features • • To adjust the volume of the source, press VOL +/-. To adjust the volume of the microphone, turn the MIC volume dial. Mix sound USB record You can play from a Source A source (USB A/ Bluetooth/Tuner/Audio in A mode) and from a Source B source (USB B/Audio in B mode) at the same time. MP3 files, radio, and audio from external devices are recorded in .mp3 format. The first time you record to a USB device, a folder is automatically created in the USB device.
11 Product information Note •• Product information is subject to change without prior notice. Specifications 1100 W (RMS) 60 Hz - 16kHz >65 dBA 1500mV/2000mV Speakers Speaker Impedance 2 x 3 ohm Tuner Tuning range Tuning grid Number of presets FM AM FM: 87.5 - 108MHz; AM: 531 - 1602kHz (9KHz); 530 1700KHz (10KHz) 100KHz (FM); 9KHz/10KHz (AM) 30 FM, 10 AM 75ohm wire loop antenna General information AC power 20 EN 170 W 35 W Version 2.0/1.1 DC 5V, 500mA 390 x 1137 x 477 mm 26.
12 Troubleshooting Caution •• Never remove the casing of this unit. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/support). When you contact Philips, ensure that your unit is nearby and the model number and serial number are available.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. NTRX710_77_UM_EN_V1.
