owner’s guide MZ1000 MZ1100 MZ1200 1 3139 115 21641
Hook Up Guide 12nc : 3139 115 21851 MZ-1000 MZ-1100 MZ-1200 PHONES AUX IN R L R L LINE OUT 1 TO POWER UNIT AM FM ANTENNA 2 3
Quick Use Guide Detailed playback features and additional functions are described in the accompanying owner’s manual. õ Listening to radio station First time power up... 1 2 3 “AUTO INSTALL PRESS PLAY” appears on the display. Press PLAY•PAUSE ÉÅ on the system. Once completed, you can listen to the last tuned radio station. If “P” appears on the display, you can press S T to select the previous/next presetting radio stations.
Important notes for users in the U.K. Italia DICHIARAZIONE DI CONFORMITA’ Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Si dichiara che l’apparecchio MZ1000, MZ1100, MZ1200, Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548. 1 2 Remove fuse cover and fuse. Fatto a Eindhoven 3 Refit the fuse cover. Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.
DK SF Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Luokan 1 laserlaite Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet.
4 3139 115 21641
English Index Français English ------------------------------------------------ 6 Español Français -------------------------------------------- 24 Deutsch Español --------------------------------------------- 42 Nederlands Deutsch --------------------------------------------- 60 Italiano Nederlands ---------------------------------------- 78 Svenska Italiano ---------------------------------------------- 96 Dansk Svenska ------------------------------------------- 114 Suomi Dansk ----------
Contents English General Information Clock/Timer Environmental information ................................ 7 Maintenance .......................................................... 7 Safety information ................................................ 7 About Clock ........................................................ 18 Connections Supplied accessories ............................................ 8 Rear connections ............................................. 8–9 Setting the clock About Timer ...
This product complies with the radio interference requirements of the European Community. English General Information Safety information ● Place the system on a flat, hard and stable surface. The type plate is located at the rear of the system. For users in the U.K.: please follow the instructions on page 2. ● Place the system in a location with adequate ventilation to prevent internal heat build-up in your system.
Connections English Rear connections Supplied accessories Speakers WARNING! – Never make or change any connections with the power switched on. – Connect the power cord from the “power box” to the power outlet only after you have finished hooking up everything. ● Adjust the position of the antenna for optimal reception. ● Position the antenna as far as possible from a TV, VCR or other radiation source. ● For better FM stereo reception, connect external FM antenna.
English Connections alternative FM antenna connection FM ANTENNA AM PHONES AUX IN R L R L LINE OUT TO POWER UNIT AM FM ANTENNA ➠ ➠ ➠ ➠ 9 3139 115 21642
Preparations English ☞ Before using the remote control 1 2 Pull out the plastic protective sheet. 3 Then select the desired function (for exampleÉ, S, T). Select the source you wish to control by pressing one of the source select keys on the remote control (for example MP3-CD, TUNER). Replacing battery (lithium CR2025) into the remote control 1 2 3 plastic protective sheet ☞ Pull out the knob A slightly to the left B Pull out the battery compartment B.
Eco Power standby ECO POWER or y Plug and Play ÉÅ - in standby mode, press and hold to initiate Plug and Play mode. - press briefly to start plug & play installation. Ç press to exit. - press and hold to switch the system to low power standby mode. Standby mode ECO POWER or y Volume - press briefly to enter standby mode. VOL 34, VOLUME +/- press to increase/decease the volume. Source selection SOURCE VOL MUTE - press to silence or restore the volume.
Radio Reception English Plug and Play Plug and Play allows you to store all available radio stations automatically, starting from FM and followed by MW band. When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station will be played. ö First time setup/power up ☞ PLAY•PAUSE ➠ plug in the power cord ö Reinstalling Plug and Play ➜ All previously stored radio stations will be replaced.
English Radio Reception Presetting radio stations You can preset up to 40 radio stations in the memory. IMPORTANT! When “P” appears on the display, it only enables preset number selection. Press ÉÅ to toggle between frequency tuning and preset number selection. ö Automatic preset programming ☞ It enables you to programme all available radio stations automatically from a selected preset number, starting from FM and followed by MW band. In tuner mode, ➠ 99 80 make sure “P” appears, if not pressÉÅ.
Radio Reception English ö Listening to the preset radio stations ☞ In tuner mode, ➠ 99 80 make sure “P” appears, if not pressÉÅ. ö Deleting a preset radio station ☞ / P 01 select a preset number In tuner mode, STOP•EJECT When the preset radio station is deleted ➜ The deleted radio frequency remains on the display until you select another preset number. ➜ The preset numbers of all other preset radio stations in the band with higher numbers are also decreased by one.
English CD/MP3-CD Operations Discs for playback This system is able to play : – All pre-recorded audio CDs (8cm/12cm) – All finalised audio CDR and audio CDRW discs – MP3-CDs (CD-ROMs with MP3 tracks) maximum albums = 99 maximum titles = 999 (depending on filename length) ISO9660/Joliet or UDF1.5 format Bitrates = 32-256 kpbs, variable bitrates ID3 tags = V1.1, V2.2, V2.3, V2.4 Loading/Unloading the disc WARNING! – Do not load more than one disc into the disc loader.
CD/MP3-CD Operations English Playing a CD/MP3-CD You can also access the functions via the same buttons on the remote control. Searching backward/ forward ● Switching on to disc mode ● Press SOURCE (or MP3-CD on the remote control) to select CD mode. During playback, hold down the button until it reaches the desired passage. ➜ For MP3 disc, it is only possible to search within the current track.
Selecting a desired MP3 Album/ Track ☞ English CD/MP3-CD Operations After inserting the MP3 disc, / ALBUM TRACK 01 If you want to change the album after confirming the selection 1 2 01 select an album number Press Ç while TRACK icon is flashing. Press S T to select the desired album and repeat steps 3-6. confirm the album selection / ALBUM TRACK 01 01 select a track number Programming the disc tracks ☞ Programming tracks is possible when playback is stopped.
Clock/Timer English IMPORTANT! When in Eco Power standby mode, it is not possible to view or set the clock/timer. Notes: – The clock/timer setting will be cancelled when the power cord is disconnected or if a power failure occurs. – During clock/timer setting, if no button is pressed within 90 seconds, the system will exit the setting mode automatically. About Clock The clock can be set in either 12-hour or 24-hour mode ("11:59 PM" or "23:59", for example).
English Clock/Timer About Timer The system can switch to CD or TUNER mode automatically at a preset time, serving as an alarm to wake you up. ö Setting the timer ☞ – Before setting the timer, ensure that the clock is set correctly. – The timer will always be switched on after it has been set. – The volume of the timer will increase gradually from the minimum level to the last tuned volume level.
Other Features OR VOL VOL CD GRAPHIC THIS SIDE ☞ ö Switching to Eco Power standby mode SOURCE ➭ ➭ ECO POWER PLAY•PAUSE ECO POWER SEARCH MZ 1100 STOP•EJECT To save the power consumption, it is advisable to switch the system to Eco Power standby mode or disconnect the system from the power supply completely when not in use. ➜ LED will display a red light. ➜ The display screen will go blank.
English Other Connections Connecting external devices PHONES ö Connecting an external device for listening to music/sound ☞ AUX IN PHONES AUX IN R L R R L L LINE OUT Connect the “AUDIO OUT” terminals of the external device (TV, VCR, Laser Disc player, DVD player, for example) to the AUX IN terminals of your system.
Specifications English AMPLIFIER Output power ..................................... 2 x 50 W MPO ................................................................... 2 x 25 W RMS(1) Signal-to-noise ratio .......................... ≥ 67 dBA (IEC) Frequency response .......................... 50 – 16000 Hz Input sensitivity AUX / CDR In ....................................... 500 mV / 1V Output Speakers .................................................................... ≥ 8 Ω Headphones .....................
English Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to solve a problem by following these hints, consult your dealer or service centre. Problem Solution The disc is ejected automatically. ✔ Load in the disc with label facing right.