Specifications
English
17
Ta pe Operation / Recording
Ta pe playback
1 Select TAPE source.
➜ The display shows “
TAPETAPE
TAPETAPE
TAPE” briefly, and the
tape counter 000 is displayed.
2 Press OPEN/CLOSE ç to open the tape
door.
3 Insert a recorded tape and close the tape door.
● Load the tape with the open side downward and
the full spool to the left.
4 Press ÉÅ to start playback.
To stop playback
● Press Ç.
To reset the tape counter display
● In stop mode, press Ç once.
Rewinding / Fast forwarding
1 Press TUNING S/T (à/á on the
remote control).
➜ The tape will stop automatically at the end of
rewinding or fast forwarding.
➜ During fast winding, you can monitor the tape
message with the tape counter.
2 Press Ç to stop rewinding or fast forwarding.
General information on
recording
● For recording, use only NORMAL (IEC type I)
tapes on which the tabs have not yet been
broken. This deck is not suited for recording on
METAL (IEC IV) type tapes.
● The best recording level is set automatically.
Altering the VOLUME, INCREDIBLE
SURROUND or DBB will not affect the
recording in progress.
● At the very beginning and end of the tape, no
recording will take place during the 7 seconds
when the leader tape passes the recorder heads.
● To protect a tape from accidental erasure, have
the tape in front of you and break out the left
tab. Recording on this side is no longer possible.
If, however, you wish to record over this side
again, cover the tabs with a piece of adhesive
tape.
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
Preparation for recording
1 Select TAPE source.
2 Load a recordable tape into tape deck with full
spool to the left.
3 Prepare the source to be recorded.
CD – load the disc.
TUNER – tune to the desired radio station.
AUX – connect external equipment.
When recording is in progress
➜ REC flashes.
● To stop recording, press 9.
● It is not possible to listen to another source.
● It is not possible to activate the timer function.
VOLUME
INCREDIBLE
SURROUND
PROGRAM
TUNING
ALBUM
/
PRESET
SOURCE
TIMER SET
DBBDSC
RDS
CLOCK SETBAND
STANDBY
-
ON
ECO POWER
RECORD DISPLAY
MCM720 MICRO SYSTEM
iR
USB DIRECT
pg 001-024_MCM720_22_Eng 2006.2.24, 15:0217