Operation Manual

10 EN
Play from USB
Note
• Make sure that the USB device contains playable audio
content.
1 Insert a USB device into the socket.
2 Press USB/AUDIO IN repeatedly to select
the USB source.
» Play starts automatically. If not, press
.
Control play
Start, pause, or resume play.
Stop play.
/ Select an album or a folder.
/ Press to skip to the previous or
next track.
Press and hold to search
backward/forward within a track.
REPEAT Play a track or all tracks
repeatedly.
SHUFFLE Play tracks randomly.
USB
VOL +/- Increase or decrease the volume.
MUTE Mute or restore sound.
SOUND Select a preset sound equalizer.
DISPLAY Adjust display brightness.
Skip tracks
When playing a CD:
Press / to select tracks.
When playing an MP3 disc and USB:
1 Press / to select an album or a folder.
2 Press / toselectatrackorale.
Program tracks
This function allows you to program 20 tracks
in the desired sequence.
1 In stop mode, press PROG to activate the
program mode.
» [PROG] (program) and [01 PR 01] are
displayed.
2 For MP3 tracks, press / to select an
album.
3 Press / to select a track, and then
press PROGtoconrm.
» [PR X] is displayed, where 'X' is the
next position in the program.
4 Repeat steps 2 to 3 to program more
tracks.
5 Press to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
To erase the program
Press twice.