User Guide

Table Of Contents
19
English
11 Press the lungo button to start the flushing cycle.
Note: The water tank will be emptied without interruption. The flushing cycle
lasts about 3 minutes.
12 When the flushing cycle has finished, the ristretto and lungo button flash a
few times.
Note: It is normal that some water remains behind in the water tank after the
descaling procedure.
The machine switches off. The descaling procedure is finished.
Meaning of light signals
-
The on/off button flashes slowly: the machine is heating up.
-
The on/off button flashes quickly: the water tank is empty, fill the water tank
with tap water.
-
All buttons light up continuously: the machine is ready for use.
-
The selected coffee button flashes slowly: the machine is preparing the coffee
recipe.
-
The selected coffee button flashes quickly:
-
Programming is activated.
-
The new coffee volume is saved.
-
The ristretto and lungo button flash simultaneously after brewing coffee: you
need to descale the machine.
Troubleshooting
This chapter summarizes the most common problems you could encounter with
your machine. If you are unable to solve the problem with the information
below, visit www.lorbarista.com/support for a list of frequently asked questions
or contact the Consumer Care Center in your country.
Problem Possible cause Solution
The machine does not switch
on.
The machine is not connected to the
mains.
Put the plug in an earthed wall
socket.
The on/off button is flashing
slowly.
The machine is heating up. This is normal.
The brewing time is longer than
before.
The machine is clogging up with
scale.
Descale the machine (see
'Descaling procedure').