Quick start guide

Auto
mode
Turbo
mode
Timer
on
Clean
lter alert
Replace
lter alert
Low water
level alert
Child
lock
Fan
speed
Power
Long press 3 seconds
Humidity
level
Timer ResetLight
on/o
Temperature
on/o
NanoCloud technology evenly distributes invisible water vapour into your
room.
In dry conditions moisture from the humidier will be absorbed by walls,
furniture, and other items in your room. Ventilation of dry outside air will also
increase the time it takes to reach the target humidity.
To optimize humidication and purication performance, it's recommended
to close doors and windows during use.
Control
Display
2-digit display
Temperature
Humidity level
Monet HU5931 EN(with cartridge)
90x127mm
When display shows
When display shows
2 hours
The lter may produce smell after being used for a while because of the
absorption of indoor air. Remove the lter and place it where it has direct
sunlight and ventilation for several hours. Re-install and try using it again.
If the odor remains, please replace the lter.
Maintenance
Clean the pre-lter and wick
Time to replace NanoProtect lter
Time to replace wick
Descale the wick with the water and white
vinegar or citric acid, rinse with water and air dry.
EVERY
WEEK
!
Rinse the water tank, the water tray and the
NanoCloud rotray humidication wick.
NanoProtect lter
Pre-lter
Wick support
Anti-bacteria cartridge
Water tank
Humidication
wick
Humidity light ring
Press for 3 seconds to reset after cleaning or replacing accessory
Humidity level
reached
Humidity level
not reached
4241 210 98591
OUTLINE
1