User manual

32
8 Change settings
This section helps you to change the settings of
your home theater.
Caution
Mostofthesettingsarealreadycongured
with the best value for your home theater.
Unless you have a reason to change a setting, it
is best to leave it at the default value.
Note
You cannot change a setting that is grayed out.
To return to the previous menu, press
BACK. To exit the menu, press
(Home).
Picture
Change the picture settings to suit your
preferences.
Note
The best setting is automatically selected for
the TV. If you change the setting, make sure
that the TV supports the new settings.
Picture settings and format
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Video], and then press OK.
4 Change the following settings, and then
press OK:
• [TV Display]: Picture format.
• [Picture Settings]:Predenedcolor
settings.
Play audio from home theater
Play the audio from a connected device through
your home theater.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [EasyLink] > [System Audio
Control] > [On], and then press OK.
• To play the audio from the TV
speakers, select [Off], and skip the
following steps.
4 Select [EasyLink] > [Audio Input Mapping],
and then press OK.
5 Follow the instructions on the TV to map
the audio of the connected device to the
audio inputs on your home theater.
Note
If you connect your home theater to the TV
through an HDMI ARC connection, make sure
that the TV audio is mapped to the ARC input
on your home theater.
EN