User manual

18
1 Press SETUP repeatedly to cycle through
the options on the display panel (see ‘Setup
menu options and settings’ on page 18).
2 Select an option, and then press OK.
3 Press the Navigation buttons ( / ) to
select a setting for the option, and then
press OK.
Note
•
If you do not press a button within ten
seconds, the setup menu exits.
• To return to the previous menu, press the
Navigation button (
). To exit the menu,
press EXIT.
Ambisound
To give the best surround sound effect, select
options about your room and the position of the
SoundBar.
1 Press SETUP repeatedly to select
AMBISOUND on the display panel (see
‘Setup menu options and settings’ on page
18).
2 Press OK.
3 Set the position of the SoundBar.
A Press the Navigation buttons ( /
) to select POSITION, and then press
OK.
B Press the Navigation buttons ( / )
to select IN FRONT, RIGHT, LEFT, or
CORNER, and then press OK.
4 Set the distance between your listening
position and the SoundBar.
A Press the Navigation buttons ( /
) to select DISTANCE, and then press
OK.
B Press the Navigation buttons ( /
) to select 0M - 2M (from zero to two
meters), 2M - 3M (from two to three
meters), or ABOVE 3M (above three
meters), and then press OK.
7 Change settings
This section helps you to change the settings of
your SoundBar.
Caution
•
Most of the settings are already congured
with the best value for your SoundBar. Unless
you have a reason to change a setting, it is best
to leave it at the default value.
Setup menu options and
settings
Setup menu
option
Setting for the
option
Setting for
the option
EASYLINK ON
OFF
SYS STBY ON
OFF
AUD CTRL ON
OFF
TV AUDIO HDMI ARC
COAX IN
OPTI IN
AUX
SUBW VOL +5, +4, +3, ..., 0, ...,
-3, -4, -5
AMBISOUND POSITION IN
FRONT
RIGHT
LEFT
CORNER
DISTANCE 0M - 2M
2M - 3M
ABOVE
3M
DISPLAY BRIGHT
DIM 1
DIM 2
EN