operation manual

14 EN
• [HDMI Setup]: [Wide Screen Format]:
For 16:9 wide screen TV display setting.
[HDMI Video]: Select the resolution of
the video signal being output from the
HDMI OUT.
• [Picture Settings]: Select color settings
for the video display on TV.
• [HD JPEG]: Enable or disable high
denition picture display.
Note
•
If you change a setting, make sure that the TV
supports the new setting.
Audio settings
1 Press SETUP.
2 Select [Audio Setup] and then press OK.
• [HDMI Audio]: HDMI audio is automatically
down-mixed to two channel for TV speakers.
If you do not want to output audio through
your TV, disable the HDMI audio.
Parental control settings
Password and Ratings
1 Press SETUP.
2 Select [Preference Setup] and then press OK.
• [Password]: Set or change your password
for parental control access. If you do not
have a password or have forgotten your
password, enter 0000.
• [Parental]: Enable maturity-based restricted
access for playback of DVD-video that
are recorded with ratings. To play discs
irrespective of the rating, select [8 Adult].
Lock disc
1 Press SETUP.
2 Select [General Setup] and then press OK.
• [Disc Lock]: Lock the disc to restrict
play. You can lock up to 20 discs on your
home theater.
Note
•
To play a locked disc, follow the onscreen instructions
to enter the password, and then press OK.
Display settings
1 Press SETUP.
2 Select [Preference Setup] and then press OK.
• [PBC]: Enable or disable the content
menu navigation of VCD and SVCD discs
with Play Back Control feature.
• [MP3/JPEG Display]: Select the content
display for MP3/JPEG les.
Energy saving settings
1 Press SETUP.
2 Select [General Setup] and then press OK.
• [Screen Saver]: Switch the home theater
to screen saver mode after 10 minutes of
no activity.
• [Auto Standby]: Switch the home theater
to standby mode after 30 minutes of no
activity when in disc or USB mode.
• [Sleep Timer]: Switch the home theater
to standby mode after the elapsed time.
• [Display Dim]: Set the brightness of the
home theater front panel display.
Restore default settings
1 Press SETUP.
2 Select [Preference Setup] > [Default], and
then press OK.
3 Select [Reset] and then press OK to conrm.
» Your home theater is reset to its default
settings, except for parental control setting.