User manual

40
English
Other Features
Dimming system’s display
screen

In any active mode, press and hold
DISPLAY on the remote control
repeatedly to select desired brightness:
HIGH, MID or LOW. HIGH is default
setting.
Setting the sleep timer
The sleep timer enables the system to
switch to standby mode automatically at
a preset time.

Press SLEEP repeatedly until it reaches
the desired preset turn-off time.
 The selections are as follows (time in
minutes).
15 ¤ 30 ¤ 45 ¤ 60 ¤ OFF ¤ 15...
 Before the system switches to standby
mode, a countdown of 10 seconds is
displayed.
To check or change the setting

Press SLEEP once to show the
remaining time before switching off. If
you continue pressing the SLEEP
button, the next sleep timer option will
appear.
To cancel the sleep timer

Press SLEEP repeatedly until "OFF"
appears or press the STANDBY ON.
Controlling ‘PHILIPS’ TV
with the remote control
This DVD system’s remote control
enables you to control the basic functions
of your ‘PHILIPS’ brand TV.
A Press SOURCE repeatedly until “TV”
appears on the display panel (or press
TV/AUX/DI on the remote control
repeatedly).
B Use . or > keys or the numeric
keypad (0-9) to select the TV’s channel.
C Press TV VOLUME +/- to adjust
the TV’s volume level.