Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 3 3 3 2 Your home theater 5 5 5 6 Safety Care for your product Care of the environment 3D health warning Main unit Remote control Connectors 3 Connect and set up 8 Connect speakers 8 Connect to TV 8 Connect audio from TV and other devices 10 Set up EasyLink (HDMI-CEC control) 11 Connect and set up a home network 12 4 Use your home theater 14 14 14 16 17 17 18 19 19 20 22 5 Change settings 24 24 24 25 25 25 25 26 26 Acces
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use.
• • • of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention. When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery.
Parents should monitor their children during 3D viewing and ensure they do not experience any discomfort as mentioned above. Watching 3D is not recommended for children under six years of age as their visual system is not fully developed yet.
2 Your home theater Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers(e.g. notification of product software upgrade), register your product at www.philips.com/welcome. Main unit This section includes an overview of the main unit. Remote control This section includes an overview of the remote control. a b c n d o e f g p q h a b c de f i r j s k a (Open/Close) Open or close the disc compartment.
c Source buttons • DISC/POP-UP MENU : Switch to disc source.Access or exit the disc menu when you play a disc. • RADIO : Switch to FM radio. • SOURCE : Select an audio input source. d BACK • Return to a previous menu screen. • In radio mode, press and hold to erase the current preset radio stations. e Navigation buttons • Navigate menus. • In radio mode, press left or right to start auto search. • In radio mode, press up or down to tune the radio frequency. f OK Confirm an entry or selection.
Rear connectors f g hij a AC MAINS Fixed AC power cable. b SPEAKERS Connect to the supplied speakers and subwoofer. c DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. d AUDIO IN-AUX Connect to an analog audio output on the TV or an analog device. e USB(VOD) Slot for a USB storage device. The USB storage device is used to rent online videos. f FM ANTENNA Connect to the supplied FM antenna. g VIDEO OUT Connect to the composite video input on the TV.
3 Connect and set up SUB WOOFER FRONT LEFT FRONT RIGHT This section helps you connect your home theater to a TV and other devices, and then set it up. For information about the basic connections of your home theater and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate at the back or bottom of the product. Note •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
Use the best quality connection available on your home theater and TV. Option 2: Connect to TV through standard HDMI Option 1: Connect to TV through HDMI (ARC) Best quality video If your TV is not HDMI ARC compliant, connect your home theater to the TV through a standard HDMI connection. Best quality video Your home theater supports HDMI version with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your home theater by using a single HDMI cable.
Option 3: Connect to the TV through composite video Basic quality video If your TV does not have HDMI connectors, use a composite video connection. A composite connection does not support high-definition video. TV 1 2 3 4 Note •• When your home theater and TV are connected through HDMI ARC, an audio connection is not required (see 'Option 1: Connect to TV through HDMI (ARC)' on page 9).
Option 3: Connect audio through analog audio cables Basic quality audio 1 Using an analog cable, connect the AUX connectors on your home theater to the AUDIO OUT connectors on the TV or other device. VCR Enable EasyLink 1 2 3 4 Press (Home). Select [Setup], and then press OK. Select [EasyLink] > [EasyLink] > [On] . On your TV and other connected devices, turn on HDMI-CEC control. For details, see the user manual of the TV or other devices.
Set up the audio If you cannot hear the audio output of a connected device through your home theater speakers, do the following: • Check that you have enabled EasyLink on all the devices, (see 'Set up EasyLink (HDMI-CEC control)' on page 11) and • on your TV, set the audio output to "Amplifier" (instead of TV speakers). For details, see the TV user manual, and • setup the EasyLink audio control. 1 2 3 4 5 Press (Home). Select [Setup], and then press OK.
6 Select [Finish], and then press OK to exit. • To view the network settings, select [Setup] > [Network] > [View network settings]. Personalize the network name Name your home theater to easily identify it on your home network. 1 2 3 4 5 Press (Home). Select [Setup], and then press OK. Select [Network] > [Name your Product:]. Press the Alphanumeric buttons to enter the name. Select [Done], and then press OK to exit.
4 Use your home theater This section helps you use the home theater to play media from a wide range of sources. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Complete the first-time setup. First-time setup appears when you turn on your home theater for the first time or if you do not complete the setup. • Switch the TV to the correct source for your home theater (for example, HDMI, AV IN).
Synchronize picture and sound Bonus View on Blu-ray If the audio and video are not synchronized, delay the audio to match the video. On Blu-ray discs that support the Bonus View, enjoy extra content such as commentaries in a small screen window. Bonus View is also known as picture-in-picture. 1 2 3 4 Press . Select AUD SYNC, and then press OK. Press the Navigation buttons (up/down) to synchronize the audio with the video. Press OK to confirm.
5 »» BD-Live starts to load. The loading time depends on the disc and your internet connection. Press the Navigation buttons to navigate BD-Live, and then press OK to select an option. Note •• To clear the memory on the storage device, press (Home), select [Setup] > [Advanced] > [Clear memory]. Note •• Make sure that the subtitle file has the exact same name as the video file. For example, if the video file is named 'movie.avi', name the subtitle file as 'movie.srt' or 'movie.sub'.
1 2 3 Press (Home). Select [Setup], and then press OK. Select [Advanced] > [DivX ® VOD Code]. »» The DivX VOD registration code for your home theater is displayed. Audio options While playing audio, repeat an audio track, a disc, or a folder. 1 USB storage devices Enjoy pictures, audio, and video stored on a USB storage device such as an MP4 player or digital camera. What you need • A USB storage device that is formatted for FAT or NTFS file systems, and complies with the Mass Storage Class.
• • • • • [PIP selection]: Display Picture-inPicture window when playing a Blu-ray disc that supports the Bonus View. [Zoom]: Zoom into a video scene or picture. Press the Navigation buttons (left/right) to select a zoom factor. [Repeat]: Repeat a chapter or title. [Repeat A-B]: Mark two points within a chapter or track to repeat play, or turn off the repeat mode. [Picture settings]: Select a predefined color setting. 3 4 5 Select a picture, and then press start the slideshow. Press to stop slideshow.
Play buttons Button Action / or Alphanumeric buttons Navigation buttons Select a preset radio station. BACK OPTIONS SUBTITLE Left/Right: Search for a radio station. Up/Down: Fine tune a radio frequency. Press to stop the installation of radio stations. Press and hold to erase the preset radio station. Manual: 1) Press OPTIONS. 2) Press / to select your preset. 3) Press OPTIONS again to store the radio station. Automatic: Press and hold for three seconds to reinstall the radio stations.
Control your home theater 1 2 On the mobile device, access MyRemote application. Select your home theater (by its network name) from the home screen. »» A browsing bar is displayed at the bottom of the screen. • 3 If your home theater is not found, check the network connection or tap the Devices tab on your mobile device to search again. Select one of the following tabs to access more options. • To return to the previous screen, press back button.
• • Windows Media Player 11 or higher for PC • Twonky Media Server for Mac or PC Enable media sharing of files. For ease of use, we have included the steps for the following applications: • Windows Media Player 11 (see 'Microsoft Windows Media Player 11' on page 21) • Windows Media Player 12 (see 'Microsoft Windows Media Player 12' on page 21) • Twonky Media for Mac (see 'Macintosh OS X Twonky Media (v4.4.
5 6 7 8 Make sure that you see a media program in the Local network screen. »» If you don't see a media program, check that your PC firewall is not blocking the connection. Select the media program and click Allowed. »» A green arrow appears next to the media program. By default, Windows Media Player shares from these folders: My Music, My Pictures, and My Videos. If your files are in other folders, click the Organize tab and select Manage libraries > Music.
Sound options Description AUTO VOL Reduce sudden changes in volume, for example, during TV commercials. 3 4 • • Select an option, and then press OK. • Press BACK to exit. • If you do not press a button within a minute, the menu exits automatically. • • POWERFUL: Enjoy thrilling arcade sounds, ideal for action-packed videos and loud parties. BRIGHT: Spice up your dull movies and music with added sound effects. CLEAR: Hear every detail in your music and clear voices in your movies.
5 Change settings Picture and video settings The home theater settings are already configured for optimal performance. Unless you have a reason to change a setting, we recommend that you keep the default setting. 1 2 3 4 Note •• You cannot change a setting that is grayed out. •• To return to the previous menu, press BACK. To exit the menu, press (Home). Language settings 1 2 3 4 Press (Home). Select [Setup], and then press OK. Select [Preference], and then press OK.
Audio settings Display settings 1 2 3 4 1 2 3 4 Press (Home). Select [Setup], and then press OK. Select [Audio], and then press OK. Press the Navigation buttons and OK to select and change: • [Night mode]: For quiet listening, decrease the volume of loud sounds on your home theater. Night mode is only available in DVDs and Blu-ray discs with Dolby Digital, Dolby Digital Plus, and Dolby True HD soundtracks.
Speaker settings 1 2 3 4 Press (Home). Select [Setup], and then press OK. Select [Advanced], and then press OK. Press the Navigation buttons and OK to select and change: • [Enhanced audio]: Select [On] to enable audio post processing at the speaker and enable karaoke settings (if your product supports Karaoke). To play the original audio of the disc, select [Off]. Tip •• Enable audio post processing before you select a predefined sound mode (see 'Sound mode' on page 23).
6 Update software Philips continually tries to improve its products. To get the best features and support, update your home theater with the latest software. Compare the version of your current software with the latest version on www.philips.com/support. If the current version is lower than the latest version available on the Philips support website, upgrade your home theater with the latest software.
Update software through the Internet 1 2 3 4 5 Connect your home theater to a home network with a high-speed Internet access (see 'Connect and set up a home network' on page 12). Press (Home). Select [Setup], and then press OK. Select [Advanced] > [Software update] > [Network]. »» If an upgrade media is detected, you are prompted to start or cancel the update. »» Downloading of the upgrading file may take long, depending on your home network condition.
7 Product specifications File formats • • Note •• Specifications and design are subject to change without notice. • Region codes The type plate on the back or bottom of the home theater shows which regions it supports. Country Europe, United Kingdom Asia Pacific, Taiwan, Korea Latin America DVD BD A A Australia, New Zealand Russia, India C China C Audio: • .aac, .mka, .mp3, .wma, .wav, .mp4, .m4a, .flac, .ogg • .ra (Available only in Asia Pacific and China) Video: • .avi, .divx, .mp4, .m4v, .
Exten sion Con tainer Audio codec Bit rate .ogg OGG Vorbis Variable bit rate, maximum block size 4096 Upto 320 kbps MP3 Video formats If you have a high definition TV, your home theater allows you to play your video files with: • Resolution: 1920 x 1080 pixels at • Frame rate: 6 ~ 30 frames per second. .avi files in AVI container Audio codec Video codec Bit rate PCM, Dolby Digital, DTS core, MP3, WMA DivX 3.11, DivX 4.x, DivX 5.x, DivX 6.x MPEG 1, MPEG 2 MPEG 4 SP / ASP H.264/AVC upto HiP@4.
.mpg and .mpeg files in PS container Audio Audio codec Video codec Bit rate PCM, DTS core, MPEG, MP3 MPEG 1, MPEG 2 40 Mbps • • .flv files in FLV container Audio codec Video codec Bit rate MP3, AAC H.264/ AVC upto HiP@4.2 H.263 25 Mbps 38.4 Mbps Audio codec Video codec Bit rate AAC, HEAAC MPEG 4 ASP 38.4 Mbps H.264/ AVC upto HiP@4.2 25 Mbps max .rm, .rv, and .
Subwoofer • • • • • • Output power: 166 W RMS (30% THD) Impedance: 4 ohm Speaker drivers: 165 mm (6.5") woofer Dimensions (WxHxD): 178 x 300 x 343 mm Weight: 3.66 kg Cable length: 3.3 m Speakers • • • • • • Output power: 2 x 166 W RMS (30% THD) Speaker impedance: 4 ohm Speaker drivers: 1 x 78 mm (3") full range Dimensions (WxHxD): 90 x 185 x 82 mm Weight (front): 0.53 kg/each Cable length: 3.25 m Remote control batteries • 2 x AAA-R03-1.
8 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on the home theater do not work. • Disconnect the home theater from the power supply for a few minutes, then reconnect.
• Play Cannot play a disc. • Clean the disc. • Make sure that the home theater supports the type of disc (see 'Media formats' on page 29). • Make sure that the home theater supports the region code of the disc (see 'Region codes' on page 29). • If the disc is a DVD±RW or DVD±R disc, make sure that it is finalized. Cannot play a DivX file. • Make sure that the DivX file is encoded according to the 'Home Theater Profile' with the DivX encoder. • Make sure that the DivX file is complete.
9 Notice This section contains the legal and trademark notices. Copyright This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S.
'DVD Video' is a trademark of DVD Format/ Logo Licensing Corporation. Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software.
10 Language code Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 9072 Ё᭛ Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk
11 Index 2 2nd audio language 2nd subtitle language 3 3D disc in 2D mode 3D safety 3D video 5 5.
media sharing menu language musical slideshows N network night mode O one-touch play one-touch standby options P parental control PBC (play back control) picture options picture resolution picture settings picture-in-picture play disc play from PC play USB storage device power settings predefined sound mode preference R recycling region codes remote control repeat S shuffle sleep timer slide animation software update software version sound speaker position speaker specifications subtitle language
Specifications are subject to change without notice © 2016 Koninklijke Philips N.V. All rights reserved. Trademarks are the property of Koninklijke Philips N.V. or their respective owners. HTB3270_12_UM_V2.