User manual

4 Press speed button 1 or 2 to switch on the blender.
After processing, press the pulse/off button to switch off the blender. If you want to process
ingredients very briey, use the pulse/off button instead of the speed buttons.
Tips
- If you want to crush ice cubes, put not more than 6 ice cubes (of approx. 25x35x25mm) in the
blender jar and press the pulse button a few times.
- Cut meat or other solid ingredients into smaller pieces before you put them in the blender jar.
- Do not process a large quantity of solid ingredients at the same time. To get good results, we
advise you to process these ingredients in a series of small batches.
- To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the
lid onto the rotating blades.
Disassembling the blender
1 Remove the mains plug from the wall socket.
2 Remove the lid with the measuring cup from the blender jar.
3 Turn the blender jar with the blade unit attached anticlockwise to remove it from the motor
unit.
4 Clean all removable parts immediately after use (see chapter ‘Cleaning’).
Filter (HR2027 only)
With the lter you can make delicious fresh fruit juices, cocktails or soy milk. The lter prevents pips
and skins from ending up in your drink.
Neveroverloadthelter.Donotputmorethan70gofsoybeans(unsoakedweight)or150gof
fruitinthelteratthesametime.
Preparing the lter for use
1 Mount the blender jar with the blade unit attached on the motor unit. Turn the blender jar
clockwisetoxit(‘click’)(Fig.5).
The blender jar can be mounted in two positions: with the handle on the right side or on the left
side.
2 Putthelterintheblenderjar(Fig.7).
Make sure that the grooves of the lter t exactly onto the ribs inside the blender jar.
3 Put the mains plug in the wall socket.
Using the lter
1 Place the lid on the blender jar.
2 Puttheingredientsinthelter.(Fig.8)
DonotexceedtheMAXindicationonthesievemesh.
3 Pour water or another liquid (milk, juice, etc.) into the blender jar.
4 Insert the measuring cup into the hole in the lid.
5 Lettheappliancerunforapprox.40seconds.
6 Switch off the appliance and remove the blender jar with the blade unit attached from the
motor unit.
Donotremovethelid.Leavethemeasuringcupandthelterinthejar.
7 Pour out the drink through the pouring lip of the blender jar. (Fig. 9)
ENGLISH 9