User manual

40 EN
9 Troubleshooting
Main unit
The buttons on this unit do
not work.
Disconnect this unit from the power outlet for a few minutes, •
then connect again.
Picture
No picture. See TVs manual for correct video input channel selection. Change •
the TV channel until you see the DVD screen.
Press • DISC.
If this happens when you change the TV type setting, you have •
to switch to its default mode:
Press 1. ç.
Press 2. b.
Press 3. SUBTITLE.
No picture on HDMI
connection.
Check if the HDMI cable is faulty. Replace a new HDMI cable.•
If this happens when you change the HDMI video resolution, •
you have to switch to its default mode:
Press 1. ç.
Press 2. b.
Press 3. ZOOM.
Warning!
Risk of electric shock. Never remove the casing of •
this unit.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this unit, check the following
points before requesting service. If the problem remains unsolved,
register your product and get support at www.philips.com/welcome.
1_cts4000_12_eng3.indd 401_cts4000_12_eng3.indd 40 10/6/2008 10:53:59 AM10/6/2008 10:53:59 AM