Always there to help you Register your product and get support at www.philips.
Contents 1 Trademark notice 3 2 Safety and notice 4 Safety 4 Compliance 5 Copyright 6 Care of the environment 6 Warranty 7 3 Basics 8 Connect 8 Switch on or off 9 Auto standby 10 Screen saver 10 Use the remote control 10 Enter text 11 4 Play 13 Play from a mass storage device 13 Search for media files 14 Select play options 14 Manage files 15 Copy or move files and folders 15 Delete files and folders 16 EN 1
Rename files and folders 16 Create music playlists 16 Create photo albums 17 5 Setup 18 System 18 Audio 18 Video 19 6 EasyLink 20 7 Update the firmware through a USB storage device 21 8 Troubleshooting 22 9 Specification 23 2 EN
1 Trademark notice ® The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending.
2 Safety and notice Read and understand all instructions before you use this product. If damage is caused by failure to follow the instructions, the warranty does not apply. Safety This 'bolt of lightning' indicates uninsulated material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering.
Modification of the product could result in hazardous radiation of EMC or other unsafe operation. Warning •• •• •• •• •• •• Never remove the casing of this product. Never lubricate any part of this product. Never place this product on other electrical equipment. Keep this product away from direct sunlight, naked flames or heat. Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the product from the power.
Copyright Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. Care of the environment Environmental information All unnecessary packaging has been omitted.
Warranty • • • • Never attempt to repair the product, this could lead to the risk of injury, damage to the product and will void your warranty. Use the product and accessories only as intended by the manufacturer. The caution sign printed on the back of the product indicates risk of electric shock. Never remove the cover of the product. Always contact Philips Customer Support for service or repairs.
3 Basics Connect MAINS ~ HDMI HDMI IN b a HDMI a HDMI connector for audio/ video output • Connects to a high-definition TV (HDTV) through an HDMI cable b Power connector • Connects to power supply through the AC power cord To connect to a TV through AV cables AV L R VIDEO • • Through AV, use the supplied AV cable to connect HMP4000 to a TV. Make sure that the plugs and sockets match in color.
For high quality audio OPTICAL • Through OPTICAL, use a fiber optical cable to connect HMP4000 to the OPTICAL or SPDIF input connector on an audio/video system. Switch on or off 1 2 On HMP4000, press on the remote control to switch on. »» The power indicator lights up white. On the TV, switch to the input connector of HMP4000: • On the remote control of your TV, use the source button to select the input channel of HMP4000.
3 To switch HMP4000 to standby mode, press »» The power indicator lights up red. again on the remote control. Auto standby From the Home screen, go to [Setup] > [System] to switch on [Automatic Standby] If there is no button press or media play on HMP4000 for 15 minutes, HMP4000 switches to standby mode automatically. Screen saver From the Home screen, go to [Setup] > [System] to switch on [Screen Saver Delay].
• • • • • / / Stop the play Skip to the previous/ next media file / Search backwards or forwards within current file Press repeatedly to select a search speed Rotate a photo INFO • Display the information about current file during play • Press repeatedly to select aspect ratio, or zoom in or out. To pan through an enlarged photo, press , , , .
Enter text 1 2 3 12 : English input in the lower case : symbols On the remote control, press select the letter or symbol. to move to a key, press OK to On the onscreen keyboard, select the input options by using the remote control: / : Move the cursor to the left or right. : Delete the entry before the cursor. When the text entry is complete, select OK on the onscreen keyboard to exit.
4 Play On the HDTV, enjoy media play from a mass storage device, including: • a USB mass storage device, • an SD card, or • an SDHC card. Play from a mass storage device 1 Connect your mass storage device to HMP4000: • For a USB mass storage device, connect to • Insert an SD/ SDHC card to the SD slot. 86% 86% 6' &DUG 6' &DUG 6HWXS 6HWXS on HMP4000. HDMI HDMI »» When the USB device is recognized by HMP4000, on the Home screen.
[Music]: Display music files. [Photos]: Display photo files. Folder 3 Movies Music Photos Select a file to start play. Search for media files • In the list of files or folders, press OPTIONS to select your options: In [Folder]: To display files in different views, • Select [Thumbnails], [List], or [Preview]. To show files by media type, • Select [All Media],[Movies],[Photos],or [Music]. In [Movies], [Music], and [Photos]: To search for a file by keyword, • Select[Search].
[Night Mode]: (for audio encoded in Dolby Digital ): Makes loud sound level softer and soft sound level louder so that you can enjoy videos at a low volume, without disturbing others. [GOTO]: Skip to the specific time, title, or chapter. [Repeat Title]: Repeat current title. [Repeat All]: Repeat all the flies. [Repeat Off]: Switch off the repeat mode. [Video Setting]: Select display options. For music, [Repeat Off]: Switch off the repeat mode. [Repeat One]: Repeat current file.
To select multiple files, a On the remote control, press EDIT. »» A list of options is displayed. b Select [Multiple Select]. »» A file list is created for you to add files or folders. c Press 2 3 4 / to select a file or folder. Press to confirm. On the remote control, press EDIT. On the pop-up list of options, select [Copy] or [Move]. Select a folder as the destination. Press to confirm. »» The selected files or folders are copied or moved to the destination.
»» A list of options is displayed. b Select [Multiple Select]. »» A file list is created for you to add files. c Press 2 3 4 / to select a file. Press to confirm. On the remote control, press EDIT. On the pop-up list of options, select [Save Playlist]. Name the playlist as needed. »» A music playlist is created. Create photo albums You can create photo albums for picture files. 1 In [Folder], select picture files. a On the remote control, press EDIT. »» A list of options is displayed.
5 Setup You can change the setup options of HMP4000. 1 2 On the Home screen, select [Setup]. • If necessary, press on the remote control to go to the Home screen. »» The setup menu is displayed. Press • Press to select an option. Press OK to confirm the option. to return to the upper-level menu. System [Menu Language]: Select the language for onscreen menus. [Subtitle]: Select the subtitle language for videos.
Video [Aspect Ratio]: Select display aspect ratio. [TV System]: Select the video resolution that your TV supports. See your TV manual for details. [Video Zoom]: Zoom in or out video scenes. *[1080P 24Hz]: Use 1080p 24 Hz for video output, where 1080p 24 Hz denotes the resolution and frame rate. [Deep Color]: Display colors with more shades and hues when the video content is recorded in Deep Color mode and the TV supports this feature.
6 EasyLink HMP4000 supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use a single remote control to control EasyLink compliant devices that are connected through HDMI. 1 2 3 4 Through HDMI, connect HMP4000 to a TV compliant with the HDMI CEC protocol. On the TV, switch on the functions to allow HDMI CEC operations (Consult the user manual of the TV). On HMP4000, switch on [Easy Link]. • On the Home screen, select [Setup] > [Easy Link]. Select [On].
7 Update the firmware through a USB storage device Before you update the firmware, check current the firmware version of HMP4000. On the Home screen, go to [Setup] > [Software Upgrade] > [Version Info]. 1 On your computer, do the following: a Go to www.philips.com/support to find the latest firmware. b Search for your model and click on "Software and drivers". c Download the firmware update and save the file to the root directory of a USB storage device.
8 Troubleshooting If you contact Philips, you will be asked for the model and serial number of this player. The model number and serial number are at the bottom of this player. Write the numbers here: Model No. __________________________ Serial No. ___________________________ No picture. • Refer to the TV user manual for how to select the correct video input channel The contents of the USB storage device cannot be read. • The format of this USB storage device is not supported.
9 Specification Note •• Specification and design are subject to change without notice. Power • Input: 100-240V~ 50/60Hz, 15W • Power consumption: < 15 W • Power consumption in standby mode: < 0.5 W Supported formats: • Video: MPEG 1/2/4(MPEG 4 Part 2), H.264, VC-1, WMV9, Xvid, MKV, RMVB 8/9/10, RM, MPG, AVI, TS, M2TS, TP, IFO, ISO, VOB, DAT, MP4, MPEG, MOV (MPEG 4, H.264), ASF, FLV(640 x 480) • Audio: Dolby digital, DTS, MPEG Audio, AAC, RA, OGG, MKA, ADPCM, AC3, WMA (V9), MP3, PCM, LPCM • Picture: .
Philips Electronics Hong Kong Ltd. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licenses. This offer is valid up to three years after product purchase to anyone in receipt of this information. To obtain source code, please contact open.source@philips.com.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. HMP4000_12_UM_V1.1 wk1312.
License Texts and Acknowledgements for any open source software used in this Philips product Instructions to obtain source code for this software can be found in the user manual, or in the supplied safety leaflet (if available). 1. Wget, Parted, Gdb GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
6. Webkit, Libexif, Ebase, Mp3info, ipodDB, qDecoder, Libneon, httpc, Libotf, Fribidi, DirectFB, Libcharguess, QT & Uclibc GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL.