DreamStation Go Heated Humidifier Manual
3
Symbols Glossary
The following symbols may appear on the device. Refer to http://www.symbols.philips.com for a description of
additional symbols used on this device and its packaging.
Symbol Denition Symbol Denition
Maximum ll line
IP22
Drip Proof Equipment
Protection against ingress of solid foreign objects ≥
12.5 mm diameter.
Protection against ingress of water with harmful
eects dripping (15° tilted)
Warning: Hot surface Reorder number
Indicated the manufacturer’s catalogue number so
the medical device can be identied.
Date of manufacture
Indicates the date when the medical
device was manufactured.
Serial number
Identify the manufacturer’s serial number for the
medical device.
Manufacturer
Indicates the medical device
manufacturer.
Operator’s manual; operating instructions
Consult instructions for use.
Type BF applied part
To identify a type BF applied part
complying with IEC 60601-1.
Prescription device
Caution: U. S. federal law restricts this device to
sale by or on the order of a physician.
How to contact Philips Respironics
Should you experience trouble with this equipment or require assistance setting up, using, or maintaining the device
or accessories, please contact your supplier. If you need to contact Philips Respironics directly, call the Philips
Respironics Customer Service department at 1-800-345-6443 or 1-724-387-4000. You can also use the following
address:
Respironics, Inc.
1001 Murry Ridge Lane
Murrysville, PA 15668
2. System overview
The DreamStation Go Heated Humidier attaches to the therapy device and provides an air outlet port to connect
a breathing circuit. The breathing circuit is composed of patient tubing, a mask, and in some instances a separate
exhalation device. The patient tubing is 12 mm performance tubing. For information related to the mask to be used,
including any need for a separate exhalation device, consult the instructions for use that accompany both the mask
and therapy device.
Note
The DreamStation Go Heated Humidier is not supported for use with battery power. Only connect the CPAP
and Humidier together to receive therapy.
The DreamStation Go Heated Humidier is designed to deliver humidication for added comfort during therapy. This
humidication level is controlled through the output of the heated humidier.
The DreamStation Go Heated Humidier is composed of the following components:
• Heated humidier - The heated humidier is the primary source of humidication. Humidication is controlled by
adjusting the temperature of the heater plate. The heater plate is then used to heat water found in the water tank.
This manual includes instructions that explain how to set up and take care of the heated humidier.
• Water tank - The water tank stores the water that will be used by the heated humidier. This manual includes
instructions that cover how to use and take care of the water tank.