User manual

10
8.1.2 After the last use of the day
Clean the milk tube and the milk spout in the
dishwasher or in hot water with some washing-up
liquid.
D
Note:
Cleaning in the dishwasher is recommended.
1 Pull the milk tube out of the milk
spout (Fig. 28).
2 To remove the milk spout from the machine,
pull it towards you (Fig. 29).
3 Remove the top part of the milk spout from
the bottom part by pulling it rmly. (Fig. 30)
4 Take out the frothing system (Fig. 31).
5 Open the spring to separate the
parts (Fig. 32).
6 Remove the inside part of the frothing system
by pulling it downwards (Fig. 33).
7 Remove the small lid by pulling it
upwards (Fig. 34).
8 Clean all parts in the dishwasher or with hot
water and some washing-up liquid (Fig. 35).
8.1.3 Reassembling the milk spout
1 Place the small lid back on the frothing
system (Fig. 36).
2 Place the inside part back into the frothing
system (Fig. 37).
3 Close the spring to lock the two parts
together (Fig. 38).
4 Place the frothing system in the bottom part
of the milk spout (Fig. 39).
5 Place the top part of the milk spout back
onto the bottom part (Fig. 40).
8.2 Cleaning the coffee spout
and the machine
1 Always unplug the machine before you clean it.
2 To remove the coffee spout from the
machine, pull it towards you (Fig. 41).
3 Remove the top part of the coffee spout from
the bottom part by pulling it rmly (Fig. 42).
4 Clean the outside of the machine with a moist
cloth.
5 Clean the water distribution disc and the
rubber sealing ring with a moist cloth.
• The 1-cup symbol starts to ash.
6 Press one of the following buttons to change
the coffee volume: the regular coffee button
for a larger cup, the milk only button for a
medium cup (default setting) or the strong
coffee button for a smaller cup (Fig. 24).
• The appliance beeps three times to conrm
and starts to brew a coffee recipe according
to the new setting.
The appliance saves the setting automatically.
8 Cleaning
Regular cleaning of your SENSEO
®
is important
to ensure that the SENSEO
®
coffee always tastes
optimally and to optimise the lifetime of the
coffee machine.
B
Warning:
Never immerse the SENSEO
®
coffee machine in
water.
8.1 Cleaning the milk spout
For a reliable performance of the milk spout
and consistently good frothing results, it is
important to clean the milk spout and milk tube
regularly and thoroughly. The milk spout can be
disassembled completely, which allows you to
remove all milk residues from it.
D
Note:
If you do not plan to froth milk again straight
away, rinse the milk spout and milk tube within 30
minutes after use.
D
Note:
After the last use of the day, clean the milk spout
and milk tube thoroughly.
8.1.1 Rinsing after every use
1 Put the milk tube in a cup of clean water (Fig. 25).
2 Place an empty cup under the spout (Fig. 26).
3 Press the milk only button (Fig. 27).
The machine rinses all milk residues from the
milk spout and milk tube with clean hot water.