User manual

5 Put the 1-cup pod holder ° or the 2-cup pod holder °°in the

machine without pod(s).

6 Close the lid and lock the lever.

Note:Make sure you lock the lever properly. Push it down until it snaps home

with a click.

Note:Never ush the machine with the lid open. The lid must be properly

locked.

7 Put the plug in an earthed wall socket.

8 Put a bowl (with a capacity of at least 1500ml) under the coffee

spout to collect the water.

9 Press the on/off button I and subsequently press the 1-cup button

° and the 2-cup button °° briey at the same time.

The boiler lls itself with water from the water reservoir. This takes

some time (approx. 90 to 150 seconds). The machine switches off

automatically when the ushing cycle ends. During the ushing cycle,

the machine produces more noise than during a regular brewing cycle.

Note:Before you use the machine for the rst time, clean the coffee spout

and the pod holders with hot water and some washing-up liquid or in the

dishwasher. Clean the water reservoir thoroughly in hot water, if necessary with

some washing-up liquid.

Now your Philips SENSEO

coffee machine is ready for use.

Brewing coffee

Fill the water reservoir with cold water up to the MAX indication

and put it back onto the machine.

Never pour milk, coffee, hot water or carbonated water into the water

reservoir.

° MIN: minimum amount of water required to brew 1 cup of

SENSEO

coffee.

°° MIN: minimum amount of water required to brew 2 cups of

SENSEO

coffee.

CLICKCLICK

ENGLISH20

4222.001.9743.3.indd 20 20-10-2008 12:00:25