Operation Manual

ENGLISH
General description (Fig. 1)
1 Spray nozzle
2 Capofllingopening
3 Steam control
- CALC CLEAN = Calc-Clean function
- t=dryironing
- ECO = optimal steam
- ; = maximum steam
-
= turbo steam
4 Steam boost button
5 Spray button
6 Temperature dial
7 Temperaturelight(specictypesonly:withsafety-autooffindication)
8 Mains cord
9 Type plate
10 WatertankwithMAXwaterlevelindication
11 Soleplate
Using the appliance
Filling the water tank
Note: Your appliance has been designed to be used with tap water. If you live in an area with very hard water,
fast scale build-up may occur. In this case, it is recommended to mix 50% distilled water and 50% tap water to
prolong the lifetime of your appliance.
Note: Do not put perfume, vinegar, starch, descaling agents, ironing aids, chemically descaled water or other
chemicals in the water tank.
1 Set the steam control to position t (dry ironing). (Fig. 2)
2 Fill the water tank up to the MAX indication (Fig. 3).
3  Closethecapofthellingopening.
Selecting temperature and steam setting
Table 1
Fabric type Temperature
setting
Steam setting Steam boost Spray
Linen MAX
;,
Ye s Yes
Cotton
3
;,
Ye s Ye s
Wool
2
ECO No Ye s
Silk
1
t No No
Syntheticfabrics(e.g.
acrylic, nylon, polyamide,
polyester).
1
t No No
1 Consult table 1 to set the temperature dial to the appropriate setting for your garment (Fig. 4).
2 Put the iron on its heel and plug it in. The temperature light goes on to indicate that the iron is
heating up (Fig. 5).
3 When the temperature light goes out, the iron has reached the correct temperature.
4 Consult table 1 to select a steam setting that corresponds to the temperature you have set (Fig. 6).
Note: To use turbo steam
, keep the steam control pressed to the turbo steam position continuously.
Caution: Do not set the steam control to a steam setting if the set temperature is below 2 or when
the iron is still heating up (when the temperature light is on). Otherwise water may leak from the iron.
Features
Spray function
- Pressthespraybuttontomoistenthearticletobeironed.Thishelpsremovestubborncreases(Fig.7).
Steam boost function
- Pressandreleasethesteamboostbuttonforapowerfulboostofsteamtoremovestubborn
creases(Fig.8).
Vertical steam
-
Youcanusethesteamboostfunctionwhenyouholdtheironinverticalpositionforremovingcreases
fromhangingclothes,curtainsetc(Fig.9).
Safety auto-off function (specic types only)
-
Theironswitchesoffautomaticallyifithasnotbeenmovedfor30seconds inhorizontalpositionor
8minutesinverticalposition.Theauto-offlightstartsashing(Fig.10).
- Tolettheironheatupagain,pickuptheironormoveitslightlyuntiltheauto-offlightgoesout.
ECO steam setting
- SelecttheECOsteamsettinginsteadofthemaximumsteamsetting;tosaveenergy,yettoachieve
satisfactoryironingresults.(Fig.11)
Dry ironing
- Setthesteamcontroltot(dryironing)toironwithoutsteam.(Fig.2)
Cleaning and maintenance
Cleaning
1 Set the steam control to t (dry ironing), unplug the iron and let it cool down. (Fig. 2)
2 Pour any remaining water out of the water tank.
3  Wipeakesandanyotherdepositsoffthesoleplatewithadampclothandanon-abrasive(liquid)
cleaning agent.
Caution: To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad,
vinegar or other chemicals to clean the soleplate.
Note: Regularly rinse the water tank with tap water. Empty the water tank after rinsing it.
Calc-Clean function
IMPORTANT: To prolong the lifetime of your appliance and to maintain good steaming
performance, use the Calc-Clean function once every two weeks. If the water in your area
is very hard (i.e. when akes come out of the soleplate during ironing), use the Calc-Clean
function more frequently.
1 Make sure the appliance is unplugged and the steam control is set to t (dry ironing). (Fig. 2)
2 Fill the water tank to the MAX indication (Fig. 3).
Do not pour vinegar or other descaling agents into the water tank.
3 Plug in the iron and set the temperature dial to MAX (Fig. 12).
4 Unplug the iron when the temperature light goes out.
5  Holdtheironoverthesink.PushthesteamcontroltotheCalc-Cleanpositionandholdit(Fig.13).
6 Gently shake the iron until all water in the water tank has been used up (Fig. 14).
Caution:Whilescaleisushedout,steamandboilingwateralsocomeoutofthesoleplate.
7 Set the steam control back to t (dry ironing). (Fig. 2)
Note: Repeat the Calc-Clean process if the water that comes out of the iron still contains scale particles.
After the Calc-Clean process
1 Plug in the iron. Let the iron heat up to let the soleplate dry.
2 Unplug the iron when the temperature light goes out.
3 Move the iron gently over a piece of cloth to remove any water stains on the soleplate.
4 Let the iron cool down before you store it.
Storage
1 Unplug the iron and set the steam control to t (dry ironing). (Fig. 2)
2 Wind the mains cord round the cord storage facility and store the iron on its heel (Fig. 15).
Troubleshooting
Thischaptersummarisesthemostcommonproblemsyoucouldencounterwiththeappliance.Ifyou
areunabletosolvetheproblemwiththeinformationbelow,visitwww.philips.com/supportforalistof
frequentlyaskedquestionsorcontacttheConsumerCareCentreinyourcountry(seetheworldwide
guaranteeleaetforcontactdetails).
Problem Possible cause Solution
Waterdripsfromthe
soleplateorwetspots
appearonthegarment
duringironing.
Thesettemperatureistoo
lowforsteamironing.
Setanironingtemperaturethatis
suitableforsteamironing.Seetable1.
Youhaveputanadditivein
thewatertank.
Rinsethewatertankanddonotputany
additiveinthewatertank.
Thesteamboostfunction
doesnotworkproperly
(waterleaksoutofthe
soleplate).
Youhaveusedthesteam
boost function too often
withinaveryshortperiod.
Waitawhilebeforeyouusethesteam
boostfunctionagain.
Youhaveusedthesteam
boostfunctionatatoolow
temperature.
Setanironingtemperatureatwhichthe
steam boost function can be used
(2toMAX).
Flakesandimpuritiescome
outofthesoleplateduring
ironing.
Hardwaterformsakes
insidethesoleplate.
UsetheCalc-Cleanfunction(seechapter
‘Cleaningandmaintenance’,section
‘Calc-Cleanfunction’).
Waterdripsfromthe
soleplateaftertheironhas
cooleddownorhasbeen
stored.
Youhaveputtheironin
horizontalpositionwhile
therewasstillwaterinthe
watertank.
Emptythewatertankandsetthesteam
controltoposition‘dry’afteruse.
Storetheirononitsheel.
Waterleaksfromthecapof
thellingopening.
Youhaveoverlledthe
watertank.
Donotllthewatertankbeyondthe
MAXindication.Pourexcesswaterout
ofthewatertank.
WhenIpushthesteam
controltotheturbosteam
position,thesteamcontrol
jumpsback.
Youdidnotkeepthesteam
controlintheturbosteam
position.
Ifyouwanttouseturbosteam,youhave
tokeepthesteamcontrolintheturbo
steampositioncontinuously.Forother
steamsettings,thisisnotnecessary.