User manual

Storage
1 Switch off and unplug the appliance.
2 Pressthecordrewindbuttontorewindthecord(Fig.26).
3 Puttheapplianceinuprightposition.Toattachthenozzletotheappliance,inserttheridgeon
thenozzleintothestorageslot.
Note: To ensure stable storage of the telescopic tube, adjust the tube to the shortest length.
Replacement
Theplugmustberemovedfromthesocket-outletbeforecleaningormaintainingtheappliance.
Replacing the dustbag
- Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e.
even when the nozzle is not placed on the oor (Fig. 27).
1 Switch off and unplug the appliance.
2 Pullthecoverupwardstoopenit.
3 Liftthedustbagholderoutoftheappliance.
Make sure you hold the dustbag upright when you lift it out of the appliance.
4 Pullatthecardboardtagtoremovethefulldustbagfromtheholder(Fig.28).
, When you do this, the dustbag is sealed automatically.
5 Slidethecardboardfrontofthenewdustbagintothetwogroovesofthedustbagholderas
far as possible. (Fig. 29)
6 Putthedustbagholderbackintothevacuumcleaner(Fig.30).
Note: If no dustbag has been inserted, you cannot close the cover.
7 Pushthecoverdownwardstocloseit.
Replacing the HEPA exhaust lter
Alwaysunplugtheappliancebeforeyoureplacealter.
Replace the HEPA exhaust lter every 12 months.
- To remove the old lter and place the new lter, follow the instructions for removing and
placing the lters in section ‘Cleaning the HEPA exhaust lter’ in chapter ‘Cleaning and
maintenance’.
Ordering accessories
To purchase accessories for this appliance, please visit our online shop at www.shop.philips.com/
service. If the online shop is not available in your country, go to your Philips dealer or a Philips
service centre. If you have any difculties obtaining accessories for your appliance, please contact the
Philips Consumer Care Centre in your country. You nd its contact details in the worldwide
guarantee leaet.
ENGLISH10