User manual

English
20
Getting Started (continued)
Setting the EasyLink control
This feature enables HDMI CEC
compliant devices to control each other
with a single remote control. It is only
available if you have connected this unit
to HDMI CEC compliant TV or device
with HDMI cable.
A Turn on the HDMI CEC operations on
your TV and other connected devices.
(Refer to your TV or connected devices
manual for details.)
B Press SETUP on the remote control.
C Press  repeatedly to select { Video
Setup Page }.
D Use  keys to select { HDMI Setup }
> { EasyLink } and press  to access.
Auto Wake Up TV
System Standby
EasyLink

The functions are turned on by default in
the factory.
– To disable { Auto Wake Up TV }
feature, select { Off }.
– To disable { System Standby }
feature, select { Decline }.
E To exit, press SETUP.
One touch control
Notes:
– To enable one touch play function, a
video disc must be placed in the disc
compartment before operation.
– Philips does not guarantee 100%
interoperability with all HDMI CEC
compliant devices.
One touch play

Press 2.
 It turns on this unit and start disc play.
 Your TV automatically turns on and
switches to the correct video channel.
One touch input switching
While this unit and TV are turned on;

Select a TV channel to watch TV
programme or start play on other
connected device.
 This unit automatically switches to the
corresponding audio input and output the
sound from its speakers system.
One touch power off

Press STANDBY/POWER button to turn
off this unit and all the HDMI CEC
compliant devices.
 When using this unit’s remote control,
you have to press and hold 2.