Specifications

66 EN
[ Active video output ]
Select the video output format that
matches the video connection between
this recorder and your TV.
[ Comp. Video (YUV) ]
– for
Component video connection. If you
TV supports progressive scan format,
you can enable the progressive scan
mode at
[ Video format ]
setting.
[ HDMI out ]
–
for HDMI connection.
[ Video format ]
For Component video connection, choose
between progressive and interlaced video
format. Check your TV for compatibility.
[ Progressive ] – turn on progressive
scan mode.
[ Interlaced ] – for TV that is not
compatible with progressive-scan video.
[ HDMI ]
Select the video resolution for HDMI
connection.
[ Auto ] – automatically select the best
supported video resolution.
[ Native ] – select the native video
resolution.
[ Manual ] – manually select a video
resolution that compatible with your
TV.
[ Black level ]
Improve the colour contrast when you
play NTSC-compatible DVDs.
[ Normal ] – normal colour contrast.
[ Enhanced ] – improved colour
contrast and brighten the picture.
•
•
•
•
•
•
•
•
•
[ Vertical ]
Adjust the vertical position of the picture
on your TV (only available when the
progressive scan mode is enabled).
4 Select a setting, then press OK.
To return to the previous menu, press
BACK 2.
To exit the menu, press OPTIONS.
Note
If your TV goes blank after changing a setting, the
setting may be incompatible with your TV. Wait for
15 seconds for auto recover.
•
•
•