User manual

English
32
Symptom
Video tape cannot be
inserted.
No Hi-Fi sound
The
Remote Control
does not work properly.
Camcorder image is
not shown.
Camcorder image via
AV input to unit is not
shown on TV screen.
Cause
 Is the cassette compartment empty?
 Audio mode is not set properly.
 There is an obstacle in the path of the
Remote Control and this unit.
 The batteries in the Remote Control
are exhausted.
 The Remote Control is not pointed at
the remote sensor of the unit.
 The remote control is too far from the
unit.
 This Remote Control use the same
buttons for VCR and DVD functions
(ex.PLAY).
 Camcorder is off.
 Unit SOURCE SELECT is not set to
LINE1 or LINE2.
Correction
 Eject the tape in.
 Select STEREO by repeatedly pressing
AUDIO on the Remote Control.
 Remove the obstacle.
 Replace the batteries with new ones.
 Point the Remote Control at the remote
sensor of the unit.
 Operate the Remote Control within 23ft
(7m).
 When using a VCR, first press the VCR
button. When using a DVD, first press
the DVD button.
 Turn camcorder on and operate
properly.
 Press INPUT to select LINE input
channel (LINE1 or LINE2).