User manual
9EN
2 Press SRC to select TUNER source.
» [AUTO INSTALL -- PRESS PLAY --
STOP CANCEL] (press to start
automatic installation, or press to
cancel)isdisplayed.
3 Press .
» The unit automatically stores radio
stationswithsufcientsignalstrength.
» After all available radio stations are
stored,therststoredradiostationis
broadcast automatically.
Turn on
• Press .
» The unit switches to the last selected
source.
Switch to standby
• Press again to switch the unit to standby
mode.
» Theclock(ifset)appearsonthe
display panel.
Switch to ECO Power mode:
• Press and hold for more than three
seconds.
» [ECOPOWER](EcoPower)is
displayedbriey.
Tip
• The unit switches to Eco Power mode after 15 minutes
in standby mode if no Apple device is docked to the
unit.
• Press and hold cannot switch the unit to Eco standby
mode if there is Apple device docked to the unit.
• Press and hold to switch the unit to standby mode if
the unit is in working mode.
Switch between standby mode and Eco Power
mode:
• In standby/Eco Power mode, press and
hold to switch the unit to Eco Power/
standby mode.
Tip
• The power indicator lights up when the unit is in Eco
Power mode.
Demonstrate the unit's
features
• In standby mode, press /MENU.
[WELCOME TO PHILIPS] (welcome to
Philips)scrollsfromtherighttothelefton
the display, and then [DEMO ON] (demo
on)isdisplayedbriey.
» This system's features are displayed
one by one.
• To turn off the demonstration, press
/MENU again.
Note
• You can also press on the main unit to turn on/ turn
off the demonstration.