operation manual

181
ENGLISH
Inserting your common interface
4 Inserting your common interface
Insert the smart card with the chip facing up.
- To be able to receive scrambled digital channels specific to an operator, you need a common
interface module and a smart card from that operator.
- To avoid incorrect insertion of the common interface module in the slot, make sure you insert
the smart card in the common interface module and insert properly the module in the
corresponding slot (either the first or second slot).
- Insert the smart card into the common interface module as far as it will go.The end of the card
will be visible outside the module.
- Push the common interface module into the slot as far at it will go without forcing.
- New and updated information may be downloaded onto the smart card from time to time.
If your receiver is equipped with a Common Interface module, the technical data relating to the
modules inserted, as well as to any smart cards inserted in these, can be accessed via a “Main
Menu/Common Interface”.You can see information as to which of the two CI slots is currently
fitted with a module. Select the module in respect of which you require additional information.
A display is generated by the CI module itself, and may therefore differ slightly in appearance from
one module to the other.To obtain a full display of the data, a smart card must be inserted in the
module.
Please consult your installer or card provider for the details of the use of your specific card.