SC486_book.
SC486_book.qxd 23-09-2004 18:22 Pagina 2 2 ☎ Helpline (www.p4c.philips.com) België & Luxemburg/ Belgien & Luxemburg/ Belgique & Luxembourg (Belgium & Luxembourg) Tel: 070 222303 Nederland (Netherlands) Phone: 0900 8406 Danmark (Denmark) Tlf: 808 82814 Österreich (Austria) Phone: 0810 001203 Deutschland (Germany) Phone: 0180 53 56 767 Portugal Phone: 2416 3033 España (Spain) Phone: 902 11 33 84 Schweiz/ Suisse/ Svizzera (Switzerland) Tel.
SC486_book.
SC486_book.qxd 23-09-2004 18:22 Pagina 4 4 ENGLISH Your baby monitor SBC SC486 Philips is dedicated to producing caring, reliable products that new moms and dads really need. Products whose reliability and operating quality bring reassurance.You can trust this Philips baby monitor to provide round-theclock support by ensuring you can always hear your baby clearly, no matter where you are in the house.
SC486_book.qxd 23-09-2004 18:22 Pagina 5 ENGLISH Environmental information No unnecessary packaging material has been used. We have tried to make the packaging easy to separate into two mono-materials cardboard (box), and polyethylene. Please observe the local regulations regarding the diposal of packing materials, exhausted batteries and old equipment.
SC486_book.qxd 23-09-2004 18:22 Pagina 6 6 ENGLISH B) Parent Unit 17 TALK button talks to your baby via the Baby Unit. + – 18 Volume Up/Down buttons ( + ) adjust the Parent Unit volume. 19 Display informs you on the present status of the Baby Unit See also ‘C) Display’ 20 MENU button opens and closes the Parent Unit menu.
SC486_book.qxd 23-09-2004 18:22 Pagina 7 ENGLISH 7 Getting the baby monitor ready Baby Unit For your convenience the Baby Unit can be mains or battery operated. Mains operated use • Connect the AC power adapter (14) to a mains socket and the cord to the DC power supply socket (9) of the Baby Unit. > The Baby Unit is now ready for mains operated use. Battery operated use 1 Remove the battery compartment cover (15). Turn the Battery Lock knob to the left (for this use a coin) and slide the cover downwards.
SC486_book.qxd 23-09-2004 18:22 Pagina 8 8 ENGLISH Parent Unit 1 Remove the battery compartment cover (29) by lifting the cover outward from the bottom. 2 Insert the two enclosed AA rechargeable batteries, noting the + and configuration inside the battery compartment. + ++ ++ + + ++ ++ + 3 Put the battery compartment cover back in place. First slide the upperside of the cover into the recesses in the battery compartment.Then press the underside downwards until it clicks in position.
SC486_book.qxd 23-09-2004 18:22 Pagina 9 ENGLISH 9 Beltclip Connecting to the Parent Unit 1 Slide the wider side of the clip into the small rectangular recess on the back of the Parent Unit. Make sure the pins on the underside are above the circular recess. 2 Press the clip downwards until it clicks in position. Disconnecting from the Parent Unit 1 Place a flat screwdriver under the belt clip as indicated. (1) 2 Gently press the screwdriver's point against the visible pin (1) in the circular recess.
SC486_book.qxd 23-09-2004 18:22 Pagina 10 10 ENGLISH Adjusting + – loudspeaker volume • Use the + buttons (18) on the Parent Unit to increase/decrease the loudspeaker volume of the Parent Unit. • Use the + – buttons (13) on the Baby Unit to increase/decrease the loudspeaker volume of the Baby Unit. > The displays give visual feedback on the volume settings on the units: Volume Off = Parent Unit volume switched off/monitoring baby silently; Volume 9 = minimum; Volume 9 9 9 9 9 = maximum.
SC486_book.qxd 23-09-2004 18:22 Pagina 11 ENGLISH 11 Checking that the units have established a connection • Check that the DECT SYSTEM LINK light (21) on the Parent Unit lights continuously (green) to confirm that the connection between both units is reliable. > When losing the link it will take about 8 seconds before the system link led starts blinking. After another 30 seconds, the led blinks read and the alarm sound is heard on the parent unit.
SC486_book.qxd 23-09-2004 18:22 Pagina 12 12 ENGLISH Playing lullabies 1 Press the l button (6) on the Baby Unit repeatedly to select one out of five available lullabies. 2 Press the 9 / 2 button (10) to play the selected lullaby. > l and the name of the lullaby appear on both Parent Unit and Baby Unit display.The lullaby will be played repeatedly for five minutes. > If you select ‘Play All’, all lullabies will be played one after another repeatedly for five minutes.
SC486_book.qxd 23-09-2004 18:22 Pagina 13 ENGLISH 13 3 Press the OK button (25) to confirm your selection. + – + buttons (18) to make adjustments and selections and press 4 Use the the OK button (25) to confirm. > In some cases ‘Saved’ appears on the display to confirm that an adjustment has been stored. 5 Press the MENU button (20) again to exit the menu. Menu options The options ‘Nightlight’ and ‘Lullaby’ can be operated via the keys on the sets as well as via the menu.
SC486_book.qxd 23-09-2004 18:22 Pagina 14 14 ENGLISH Temperature Set a minimum and a maximum room temperature (‘Range’) which you think are convenient for your baby. Minimum temperature can be set between 10 °C and 19 °C; maximum temperature can be set between 22 °C and 30 °C. If the actual room temperature exceeds the set minimum or maximum temperature, the ‘Low’ or ‘High’ indication appears on the display and the actual temperature starts blinking.
SC486_book.qxd 23-09-2004 18:22 Pagina 15 ENGLISH 15 Problem solving If a fault occurs, first check the points listed below. If you are unable to remedy a problem by following these hints, contact the helpline or consult your dealer. Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee. Problem Possible cause Solution DECT SYSTEM LINK light does not light Parent Unit: unit is not turned on. Baby Unit: unit is not turned on. Batteries are low.
SC486_book.qxd 23-09-2004 18:22 Pagina 16 16 ENGLISH Technical specifications Power supply: – 2x AA rechargeable batteries (1.5V, NiMH, 1600mAH) for Parent Unit (included) – Optional batteries 4x 1.5V; AA for Baby Unit (not included) – AC power adapter 230V AC, 50 Hz. Only use the 9 Volt DC/ 300 mA AC power adapter included.
SC486_book.qxd 23-09-2004 18:22 Pagina 17 ENGLISH – 2 When the lights on the unit light up,+immediately press and hold the volume down button+( – - 13 and - 18). > The unit has now been reset to the default factory settings. Note: By executing the factory initialisation mode Parent Volume, Baby Volume and Baby Sensitivity are automatically reset to their factory default settings. Personal preferences need to be set again.
SC486_book.