Contents 1 Warnings & Safety [+d Information Safety Caution Returns & Disposal’ 2 installation Guide 03 Parts List Assembly View Installation Steps Required Tools 3 Programming Guide 10 Exterior Assembly Interior Assembly Function Definitions 4 Operating the Lock 12 Unlocking the door from outside Unlocking the door from inside Locking the door from outside Locking the door from inside 5 PIN Coda Parameters 13 6 Programming 4 Instructions Change the Default Master PIN Code Change Master PIN Code Add User PI
1 Warnings & Safety Information Safety # Before using this product, please read and understand all instructions. Carnage caused by allure to follow Instructions Is not covered by the warranty. @ Only use the manufacturer provided components and suggested accessories # Only use AA alkaline batteries. # Do not forcibly disassemble the product to rigger an alarm or damage the product # Do not scraps the fingerprint sensor with sharp objects as this may cause permanent damage.
2 Installation Guide Parts List © Exterior Keypad @ Latch Bolt @hunting Plate @ Interior Assembly Assembly ® AA Batteries (4) @ Battery Cover & Interior Assembly @ Mounting Plate Sowers (2) Resews (2) ® Reinforcement @trike Plate © strike Piste Serene vs 2) @Latch Bolt i reinforcement Plate (Optional) Saran [Optional 3) Sores (3) @ Exterior Assembly ® Backup Keys S Drive-n Collar gritting Template Resew (Optional) (Optional = ack sot Warn = @ user Manual B Quick Start Guide
Assembly View Exterior Assembly . Latch Alt . Mounting Plate . interior Assembly AA Batteries (4) Battery Cover . Interior Assembly Screws (2) Mounting Plate Screws (2) Reinforcement Plate {optional} Strike Plate Strike Plate Screws (2) Reinforcement Plate Screws (Optional) (2) .
Installation steps Required Tools #2 Phi Ips screwdriver Prepare the door and cheek dimensions {I} Measure to confirm that the hole in the doors or (36mm or 54mm}: Me sure ta confirm that the hoe In the door edge is 1* {25mm} or 21/8" (380r 54mm) I 25mm {@ Measure to confirm that the backseat is ether or (60mm or 70mm) or (60mm or 70mm) (B Measure to confirm that the door is 1-378" to 2* (35mm to 50mm] thick 2" (35mm to 50mm) @ Make sure the hole in the door frame is hurtled a minimum of 1# (25mm) deep, to
(B) Determine hack set and adjust the latch Hold the latch in grant of the door hole, with the ‘arch face flush against the door edge 1s the slotted hole centered Tn the door hole? VES Ho adjustment Is required Proceed to next step.
(© Use a screwdriver to confirm that the tenderloin jade and unlocks smoothly. {B) metal strike on the door frame. hot ga sure the hole In door frame Is dried a minimum of PEs) deep install exterior assembly Orator installation, make sure the latch ks fly retracted fin the unlocked position] (8) With the latch fully retracted {in the unlocked position), route the table below the arch, and Parting the allspice through the soot in the latch, Measure the diameter of the hole In the door.
Keep parallel to door edge. D Secure the mounting piste withe Mounting Plate Strews. Do not overnight screes TT — Outhitting Plate Loews Note: The 3rd sew onto 5 OPTIONAL install interior assembly 2 Push the battery cover up In the direction 3 themselves cable connector of the exterior as illustrated, assembly to the socket on the interior assembly. Push the connector In firmly uni its completely attached. bro nt uae batteries before Fishing the lock installation.
8 Keep the thumb tm in the vertical 45 attach interior Assembly to Courting Plate ‘position and install the interior Assembly. and faster using the interior Assembly Screws Horizontal G8 Install the AA batteries §3 press and hold the Reset Button for at ‘wast 5 seconds until you hear a beep. This activates the lock handing process and mus the completed before setting up the ok. Ensues the cabs Is rot pinched or the lock wi pet function properly.
3 Programming Guide Exterior Assembly Interior Assembly PHILIPS Stats indicator Touchscreen Keypad Cancel Key Confirm Key Fingerprint Keyhole Cover ecocide Keyhole Battery Cover est Button Privacy Button installation Buckle 50008 Thumb Tum
Function Definitions Required for programming and adjusting settings. The Master PIN Code can be used to unlock the deadbolt In away mode and privacy mode. The default Master P/N Code must be changed before programming. {Programming instructions refers io page 14) The owner/manager shooed keep this Information confidential Auto Lod The unit will automatically lock after it has been unlocked, This function is disabled by default.
4 Operating the Lock Operation Unlocking the door from outside 1. Place plain over the lock to wake up the keypad 2. Curio by the PIN condescending Master PIN, User PIN and One Time PIN}. Union by the fingerprint \nick by the mechanical key Unlocking the door from inside 5 Rotate the thumb turn to unlock position Oo Locking the door from outside Press and ho'd any button on the keypad for at ‘east 2 seconds to lock the door In manual mode.
5 PIN Code Parameters Da net load batteries before finishing the fox installation, instar PIN Code {4 to 10 disk The default Master PIN Code [s 12345678. Change the default Master PN Code before programming other codes. User FIN Code {4 to 10 digits) A total of 20 User PIN Codes can be programmed and stored in the Jack.
6 Programming Instructions “The default Master PIN Case is 12345678 Change the deft Master PIN Code before programming the sock “The Indicator it wil flash red when the cote mired wes not saved successful 10 button 5 pressed for mots thin 19 seconds, the ok wil xk programming mods. Touch keypad with your hand palm to activate lock before setting up.
| DelstouserpiNCode |] User PIN Code Press €) 2 Times | wlpp| Master PIN code |p| Press @) 1 Time (up| Press€) (ofp Curie |W Pes @ 17m rrr Press €) 2 Times | wlpp| Master PIN code |p| Press @) 1 Time (p| Press@) (ofp Scan fingerprint 8 times (Each time succeed along with Green light Is on) | Delete User Fingerprint | Press €) 2 Times | wlpp| Master PIN code |p| Press @) 1 Time (p| Press@) |p Scan unwanted fingerprint ¥ time 15
| change system Language | Press €) 2 Times | wlpp| Master PIN code |p| Press@) 1 Time (up| Press@) (ofp press €) wp Press @) 1 Time Press €) wp Press @) 1 Time Press €) 2 Times | up| Master PIN code |p| Press @) 1 Time (p| Press@) |p press) wp Press @) 1 Time press @ wp Press @) 17me
7 Factory Default Settings & Reset Instructions Factory Reset Instructions This procedure deletes al user codes associated with the dock Restoring the lode wi also activate lock handing process. Press the reset button for at least 5 seconds unt you hear the tors prompting you to restore the default settings.
8 Troubleshooting The itch does not 4 Make sure the backseat on the latch bs set to the proper length operate correctly after Refer ta installation Guide. installation. © Make sure prior to Installation latch bolt Is retracted when installing the deadbolt. Refer tn installation Guide. # Please restore to factory default setting and enter the default Master FIN code to setup the lids Refer to User Slued. Lockdomsrotsmoothy | © Confirm the proper mounting screws are Installed.
20 9 Warranty This product was brought to the market by Cone, which is the manufacturer of the product.
eR J Philips and the Philips Shield Emblem are registered trademarks of Reckoning Pls Bi. ard sg used durst cane. Ths produce hs Boon manufactured by and is sold under the responsibility of Sheen Cone Intelligent Technology Co, Landsat Sheen Co next Intelligent Technology Co. Ld.