User manual

10EN
4 Press CD on the remote control to select
the disc source.
» [Reading] (reading) blinks for a
moment, then CD starts playing
automatically. If not, press
.
Play from a USB storage
device
Note
•
Make sure that the USB device contains playable audio
content.
1 Insert the USB storage device into the
socket.
2 Press USB on the remote control to select
the USB source.
» Play starts automatically. If not, press
.
Control play (CD/USB mode)
/ Selectanaudiole;
Press and hold to fast forward
or fast reverse the track during
playback, then release to resume
play.
/ For MP3/WMA tracks, select an
album or folder.
Start or pause play.
Stop play.
OK Conrmaselection.
REPEAT/
SHUFFLE
[
]: Play the current track
repeatedly.
[
]: (for MP3/WMA only):
Play all tracks in this
album repeatedly.
[
]: Play all tracks repeatedly.
[
]: Play all tracks randomly.
To return to normal play, press
REPEAT/SHUFFLE repeatedly
untiltherepeatorshufeicon
disappears.
Program tracks
You can program a maximum of 20 tracks.
1 In CD or USB mode, press to stop
playback.
2 Press PROG to activate the programming
mode.
» [PROG] (program) is displayed.
3 For MP3/WMA tracks, press /
repeatedly to select an album.
4 Press / repeatedly to select a track,
then press PROGtoconrm.
5 Repeat steps 3-4 to program more tracks.
6 To play the programmed tracks, press .
» During play, [PROG] (program) is
displayed.
• To erase the program, press
twice.
Adjust sound
During play, you can adjust volume and select
different sound effects.
Key Function
VOL +/- Increase or decrease volume.
MUTE Mute or resume sound.