User manual
11
Note
• The type plate is located on the bottom of the
main unit.
1 Connect the AC power cord to the wall
outlet.
Set time and date
1 In standby mode, press and hold SET
TIME for two seconds.
» The hour digits begin to blink.
2 Press to select the 12/24 hour format.
3 Press / to set the hour.
4 Press SET TIMEtoconrm.
» The minute digits begin to blink.
5 Repeat steps 3-4 to set the minute, year,
month, and day.
Tip
• In 12 hour format, [MONTH--DAY] is
displayed.
• In 24 hour format, [DAY--MONTH] is
displayed.
MP3 LINK FM
ANTENNA
1 Open the battery compartment.
2 Insert 2 x R6/UM-3/AA size batteries
with correct polarity (+/-) as indicated.
3 Close the battery compartment.
Caution
• Remove battery if it is exhausted or will not be
used for a long time.
• Batteries contain chemical substances, so they
should be disposed of properly.
• Perchlorate Material-special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
Prepare the remote control
Caution
• Risk of explosion! Keep batteries away from
heat,sunshine,orre.Neverdiscardbatteries
inre.
1 Open the battery compartment.
2 Insert one button battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Note
• If you are not going to use the remote control
for a long time, remove the batteries.
Connect power
Caution
• Risk of product damage! Ensure that the power
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
• Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
• Before connecting the AC power cord, ensure
you have completed all other connections.
English
EN
DC390_12_UM_Book1_V4.0.indb 11 8/16/2012 3:46:12 PM