Operation Manual

11
English
EN
7 Change settings
This section helps you to change the settings of
your SoundHub.
Caution
•
The settings are already congured for optimal
performance. Unless you have a reason to change
a setting, we recommend that you keep the default
setting.
Setup menu options and
settings
Setup menu option Setting for the option
SUBW VOL +5, +4, +3, ..., 0, ..., -3,
-4, -5
DISPLAY BRIGHT
DIM 1
DIM 2
SLEEP OFF, 15 MIN, 30 MIN, 45
MIN, 60 MIN
VERSION
RESET DEFAULT
SETTINGS
Setup menu options
1 Press SETUP repeatedly to cycle through
the options on the display panel (see 'Setup
menu options and settings' on page 11).
2 Select an option, and then press OK.
3 Press the Navigation buttons ( / )
to select a setting for the option, and then
press OK.
Note
•
If you do not press a button within ten seconds, the
setup menu exits.
• To exit the menu, press EXIT.
• RESET DEFAULT SETTINGS is available about forty
seconds after the SoundHub is switched to on.
Display panel
Change the brightness of the SoundHub display
panel.
1 Press SETUP repeatedly to select DISPLAY
on the display panel (see 'Setup menu
options and settings' on page 11).
2 Press OK.
3 Press the Navigation buttons ( / ) to
select BRIGHT, DIM 1, or DIM 2, and then
press OK.
Sleep timer
Set timers to switch the SoundHub to standby
after a specied time.
1 Press SETUP repeatedly to select SLEEP
on the display panel (see 'Setup menu
options and settings' on page 11).
2 Press OK.
3 Press Navigation buttons ( / ) to set
a sleep time on the display panel.
» The sleep timer can be set up to 60
minutes. If the sleep timer is set to
OFF, it switches off.
Note
•
If you switch the SoundHub to standby, the sleep time
that you have set is canceled.
Apply factory settings
You can reset your SoundHub to the default
settings programmed at the factory.
1 Press SETUP repeatedly to select RESET
DEFAULT SETTINGS on the display panel.
2 Press OK.
» TO RESET PRESS OK is displayed on
the display panel.
3 Press OK again.
» When the default settings are restored,
RESET OK is displayed on the display
panel, and the SoundHub automatically
switches off and restarts.