Installation Instructions

Table Of Contents

Firmware upgrade procedure

(BTM2180_BTM2185_DCM2330_MCM2320_MCM3150_DCM1170_DCM3160_BTM

1180)

Introduction:

Philips strives to continually bring you the best experience from our products. To obtain the

optimal playback and latest features, you are highly recommended to upgrade the firmware of your

product.

Preparation for firmware upgrade:

• A PC with an archive utility that supports the ZIP-format (e.g. WinZip for Windows).

• A USB flash device with enough free space to hold the firmware file. An empty one is advised to

avoid a crash among files.

(You can check the size of the firmware file at the top of the screen.)

Upgrade Procedure:

Step 1: Check your current firmware version

1. Connect to device to power supply.

2. Switch on the device.

3. When the display shows --:-- , press and hold the <STOP> button for about 3 seconds.

The display would show the firmware version.

4. Compare the firmware version displayed to the latest version. If the existing firmware in your

device is of an earlier version than the new release, please proceed to Step 2.

Otherwise, the latest firmware is installed and hence an upgrade is not needed.

Step 2: Upgrade the firmware for your product

1. Download firmware.

Click on the Download icon on the screen to download the new firmware package to your

computer.

2. Transfer firmware to a USB flash drive.

i. Extract the firmware upgrade folder from the downloaded firmware package.

You will have two files, “nemo.bin” and “boot.ali”.

Note: DO NOT rename the files to avoid an upgrade corruption.

ii.

Copy the two files to the root directory in the USB flash drive.

1. Check your current firmware

version

2. Upgrade the firmware for your

roduct (via a USB flash drive)

3. Confirm upgrade

successfulness

PAGE 1
Firmware upgrade procedure (BTM2180_BTM2185_DCM2330_MCM2320_MCM3150_DCM1170_DCM3160_BTM 1180) Introduction: Philips strives to continually bring you the best experience from our products. To obtain the optimal playback and latest features, you are highly recommended to upgrade the firmware of your product. Preparation for firmware upgrade: • A PC with an archive utility that supports the ZIP-format (e.g. WinZip for Windows). • A USB flash device with enough free space to hold the firmware file.
PAGE 2
3. Upgrade the firmware to the product Warning: DO NOT press any button, switch off, or interrupt the power supply during the upgrading process, otherwise the product may become defective. i. Switch on the device. Select USB mode. ii. Insert the USB flash drive into the USB socket. iii. The device will search for the upgrade files in your USB flash drive. You will hear 2 beeps and the display panel shows "CD UPGRADE ". DO NOT press any button. iv. After about 3 minutes, you will hear some beeping.