Always there to help you Register your product and get support at www.philips.
Contents 1 Safety 2 2 Your Portable Speaker 3 3 3 4 3 Get started 5 5 5 4 Use Bluetooth devices 6 6 7 5 Listen to an external device 8 6 Adjust volume 9 Introduction What's in the box Overview of the speaker Charge the built-in battery Turn on the speaker Connect a device Play audio via Bluetooth 7 Product information 10 10 10 10 8 Troubleshooting 11 11 11 9 Notice 12 12 12 13 13 General information Bluetooth Amplifier General About Bluetooth device Compliance Care of the environment
1 Safety • • • • • • • • Do not use this apparatus near water. Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Only use attachments/accessories specified by the manufacturer. The product shall not be exposed to dripping or splashing. Do not place any sources of danger on the product (e.g. liquid filled objects, lighted candles). Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
2 Your Portable Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this speaker, you can • listen to audio from an external device via Bluetooth connection, • listen to audio from an external device through an audio input cable, and • make phone calls.
Overview of the speaker a b c e d a b /MULTIPAIR In Bluetooth mode, press and hold to enter pairing mode. • Press to answer an incoming call. • Press to end the current call. • Press and hold to reject an incoming call. • • • Turn on or turn off the product. Adjust volume. c Bluetooth and power indicator d AUDIO IN • Connect external audio devices. e DC IN • Charge the speaker via USB cable.
3 Get started Always follow the instructions in this chapter in sequence. Charge the built-in battery The speaker is powered by a built-in rechargeable battery. Turn on the speaker Rotate the knob to turn on or turn off the speaker. • Bluetooth mode(with Bluetooth indicator flashing blue): Listen to an external Bluetooth device through Bluetooth connection. • OFF: Turn off this product. ON Note •• Before use, fully charge the built-in battery. •• The micro USB socket is for charging only.
4 Use Bluetooth devices With this speaker, you can listen to audio from a player and make a call through Bluetooth. Note •• WOOX Innovations does not guarantee the compatibility with all Bluetooth devices. •• Before pairing a device with this product, read its user manual for Bluetooth compatibility. Make sure that the connected Bluetooth device supports the Advanced Audio Distribution Profile (A2DP) and the Audio Video Remote Control Profile (AVRCP).
»» The Bluetooth indicator flashes blue quickly and the speaker beeps once. Note •• If you want to pair a third device, pause the music playback one of the connected device first, then press and hold /MULTIPAIR until you hear a single beep to enter pairing mode. •• If there is no Bluetooth connection after 15 minutes, the speaker goes to standby mode automatically for power saving. •• Rotate the knob to turn on the speaker if the speaker goes to standby mode.
5 Listen to an external device You can also listen to an external audio device, for example, MP3 player, through this product. Note •• Make sure that music playback through Bluetooth is stopped. 1 2 Rotate the 3 Play audio on the external device (refer to its user manual). 8 EN knob to turn on the speaker. Connect an audio input cable with 3.5mm plug on both ends between • the AUDIO IN socket on this product, and • the headphone socket on the external device.
6 Adjust volume Rotate the volume knob to increase or decrease the volume.
7 Product information Note •• Product information is subject to change without prior notice. General information Power Supply (through USB socket) Built-in Battery Dimensions - Main Unit (W x H x D) Weight - Main Unit 5V 1A Lithium battery (750 mAh, 3.7 V) 107 X 32 X 97 mm 0.2 kg Bluetooth Bluetooth specification Supported profiles Range V3.0 HFP, HSP, A2DP 10 m (Free space) Amplifier Rated Output Power Signal to Noise Ratio AUDIO IN 10 EN 3.
8 Troubleshooting Warning •• Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact the Consumer Care, make sure that the product is nearby and the model number and serial number are available. Cannot connect with the device.
9 Notice Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. Compliance This product complies with the radio interference requirements of the European Community. Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.
Trademark notice The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson is under license. Other trademarks and trade names are those of their respective owners. Copyright 2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this products.
2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. BT2600_BT2650B_00_UM_V1.