Register your product and get support at www.philips.
Important notes for users in U.K. Italia Mains plug This apparatus is tted with an approved moulded plug. Should it become necessary to replace the main fuse, this must be replaced with a fuse of same value as indicated on the plug (example 10A). 1. Remove fuse cover and fuse. 2. The replacement fuse must comply with BS1362 and have the A.S.T.A. approval mark. If the fuse is lost, contact your dealer in order to verify the correct type. 3. Refi t the fuse cover.
DK Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet. Den indbyggede netdel er derfor tilsluttet til lysnettet så længe netstikket sidder i stikkontakten. S Klass 1 laseraparat Varning! Om apparaten används på annat sätt än i denna bruksanvisning speci cerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
HDMI, and HDMI logo and High-De nition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending.
1 Important Safety and important notice 2 Your product Features highlight Product overview 3 Connect Connect video/audio cables Route audio to other devices Connect USB device Connect LAN Connect power cord 4 Get started Insert the remote control batteries Find the correct viewing channel Use the Home menu Select menu display language Set up network Use Philips EasyLink 5 Play Play a disc Play video Play music Play photo Play from USB device 6 6 7 7 9 28 Video Setup Audio Setup Preference Setup Easy
1 Important Safety and important notice Recycle notice Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Warning! • Risk of overheating! Never install this product in a • • • • • • con ned space. Always leave a space at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorised by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
BONUSVIEW/PIP (Picture-In-Picture) This is a new function of BD-Video that plays the primary video and secondary video simultaneously. Blu-ray players with Final Standard Pro le or Pro le 1.1 specs can play Bonus View features. BD-Live Connect this Blu-ray disc player to the movie studios website via the LAN port to access a variety of up-to-date content (e.g., refreshed previews and exclusive special features).
a 2 (Standby-On) Remote control English • Turns on the Blu-ray disc player or switches to standby mode. • When EasyLink is enabled, press and hold for at least three seconds to turn all connected HDMI CEC compliant devices to standby. Your product Product overview b BONUSVIEW • Turns on of off the secondary video in a small screen window during play (applicable only to BD-Video that supports the BONUSVIEW or Picture-in Picture feature). c TOP MENU • BD: Displays the top menu.
k H (Mute) • Mutes or restores TV audio (applicable only to PHILIPS brand TV). l A +• Increases or decreases TV volume (applicable only to PHILIPS brand TV). m SUBTITLE • Selects a subtitle language for video. • If the TV display setting of this player is set to [Cinema 21:9], the play option menu is displayed. n AUDIO • Selects an audio language or channel. • If the TV display setting of this player is set to [Cinema 21:9], the play option menu is displayed.
a b c Your product English Main unit d efg h a 2 (Standby-On) • Turns on the Blu-ray disc player or switches to standby mode. b Disc compartment c Z (Open/Close) • Opens or closes the disc compartment. d IR sensor • Detects signals from the remote control. Point the remote control at the IR sensor. e Display panel f B (Play) • Starts or resumes play. g X (Pause) • Pauses play. • Moves the paused picture one step forward. h (USB) socket • Connects a USB supported device.
3 Connect Connect video/audio cables Make the following connections to use your Blu-ray disc player. Connect this Blu-ray disc player to TV to view disc play. Select the best video connection that the TV can support. Basic connections: • Video • Audio • Power • Option 1: Connect to the HDMI socket (for a HDMI, DVI or HDCP-compliant TV). • Option 2: Connect to the component video socket (for a standard TV or Progressive Scan TV). • Option 3: Connect to the composite video (for a standard TV).
Tip • • • • HDMI/DVI adaptor. Connect an audio cable for sound output. You can optimise the video output. Press HDMI repeatedly to select the best resolution the TV can support. Use HDMI category 2 cable (High Speed HDMI cable) for optimal video and audio output.
Route audio to other devices Connect to digital ampli er/receiver Route the audio from this Blu-ray disc player to other devices to enhance audio play. Connect to coaxial socket LAN Connect to multi-channel receiver COAXIAL (BDP7300 only) COAXIAL LAN 1 Connect a coaxial cable (not supplied) to the COAXIAL socket on this player and the COAXIAL/DIGITAL input socket on the device. Connect to optical socket (BDP7300 only) 5.1ch AUDIO OUT LAN OPTICAL 1 Connect the 5.
Connect to analogue stereo system • This player can only play/view MP3, WMA/WMV9, Connect • LAN DivX (Ultra) or JPEG les that are stored on such devices. Press HOME, select [USB] in the menu to access the content and play the les Connect LAN AV OUTPUT Connect this player to the network to enjoy software updates and BD-Live applications. AUDIO OUT LAN 1 Connect the audio cable to the AUDIO L/R-AV OUTPUT sockets on this player and the AUDIO input sockets on the device.
Connect power cord Warning! • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the underside of this unit. 1 Connect the power cord to the power outlet when all the required connections are done. This product is now ready to be set up for use.
Insert the remote control batteries English Navigate through the menu 1 Point the remote control directly at the remote sensor on this player and select the desired function. 2 Use the following buttons on the remote control to navigate through the on-screen menus. Button vV Action Move up or down. bB Move left or right. Con rm a selection. Enter numbers. Back to the home menu. 1 Slide the battery cover off the back of the remote control. 2 Insert two supplied batteries (AAA).
Use the Home menu Tip • You can set the default language for DVD disc menu (see ‘Adjust settings’ > [Video Setup] > [Disc Menu]). Settings Play disc Press USB (Home Menu). Set up network • Select [Play Disc] to start disc play. • Select [USB] to view the USB contents. • Select [Settings] to access the setup menus. Follow the steps below to help you set up the network connection for software updates and enjoy BD-Live applications.
Note • This player does not support automatic detection of cross-cables. • Loading BD-Live content from the internet may take Use Philips EasyLink Your product supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. some time, depending on the le size and the speed of the internet connection.
5 Play Information on disc contents The contents of disc are generally divided into sections or folders (groups of titles/ les) as shown below. Play a disc BD-video, DVD-video title 1 chapter 1 chapter 2 title 2 chapter 1 chapter 2 chapter 3 track 4 track 5 Caution! • Do not place any objects other than discs into the disc compartment. • Do not touch the disc optical lens inside the disc compartment. 1 2 Press Z to open the disc compartment.
Play video 1 2 Play a title. Play a title. Use the remote control to change the video play. Button Use the remote control to control the title. Button Play Control video play 1 2 English Change video play Action Selects an audio language or channel. Selects a subtitle language for video. Action Pauses play. Selects or turns off repeat or shuf e mode. • Repeat options vary depending on the disc type. • For VCDs, repeat play is only possible when the PBC mode is turned off.
Display menu BD-Video disc: • TOP MENU stops the video play and shows the disc menu. This feature is disc-dependant. • POP-UP MENU accesses to the BD-Video disc menu without interrupting disc play. DVD-video disc: • DISC MENU displays disc information and guides you through the available functions in the disc. • TOP MENU displays the content of the disc. VCD/SVCD/DivX disc: • DISC MENU displays the content of the disc.
1 During play, press OPTIONS. The play options menu is displayed. This feature is only available if you have set the [TV Display] to [Cinema 21:9] (see ‘Adjust settings’ > ‘Video Setup’). 2 Select [Repeat A-B] in the menu, then press OK to set the starting point. 1 During play, press OPTIONS. The play options menu is displayed. 2 Select [Subtitle Language] > [Shift Subtitle] in the menu, then press B. 3 Press the Navigation buttons (v V) to shift the subtitle, then press OK.
Enjoy BONUSVIEW For a disc compatible with the BONUSVIEW or Picture-In-Picture feature, you can instantly view additional content (such as commentaries) in a small screen window. Primary video Secondary video 1 Press BONUSVIEW to turn on the secondary video window. 2 Press OPTIONS. The play options menu is displayed. 3 4 Play DivX® video DivX video is a digital media format that retains high quality despite a high rate of compression. You can enjoy DivX video on the certi ed product.
MP3/WMA is a type of highly compressed audio le ( les with .mp3 or .wma extensions). Control a track 1 1 2 Insert a disc or USB that contains the MP3/ WMA music. 2 Press , select [Play Disc] or [USB], then press OK. A contents menu is displayed. 3 4 Select a folder, then press OK. Play a track. Use the remote control to control the track. Button Action Pauses play. Starts or resumes play. Stops play. Skips to the next track. Skips to the beginning of the current track.
Play photo Play photos as slideshow This player can play JPEG photos ( les with . jpeg or .jpg extensions). 1 2 3 4 Insert a disc or USB that contains the JPEG photos. Press , select [Play Disc] or [USB], then press OK. A contents menu is displayed. Select the folder/album you want to play. • To view the photo information, press INFO. • To select a photo, press the Navigation buttons. • To display the selected photo and start slideshow, press OK. Press B to start slideshow play.
Play from USB device 1 During play, press OPTIONS. The play options menu is displayed. 2 Select [Duration per slide] in the menu, then press OK. This player plays/views MP3, WMA/WMV, DivX (Ultra) or JPEG les on the following USB devices: 4 Select [Slide Animation] in the menu, then press OK. 5 Select the type of slide animation effect you want to apply, then press OK. Play Select the duration per slide, then press OK.
6 Adjust settings You can customise various kinds of settings as you prefer. Refer to the following instructions to navigate through the setup menus. [Subtitle] Selects the default subtitle language for disc play. [Disc Menu] Selects the language for disc menu. Video Setup 1 2 3 [Audio] Selects the default audio language for disc play. Note Press . • If the language you have set is not available on the Select [Settings], then press OK. Select [Video Setup], then press B.
• [Auto] – Detects and selects the best supported video resolution automatically. • [Native] – Sets to original video resolution. • [480/576i, 480/576p, 720p, 1080i, 1080p, 1080p/24Hz] – Selects a video resolution setting that best supported by the TV. See the TV manual for details. • • • • Note • If the setting is not compatible with the TV, a blank screen appears. Wait for 15 seconds for auto recover or press HDMI repeatedly until the picture appears. [Standard] – Original colour setting.
[HDMI Audio] Selects the HDMI audio output when you connect this player and the TV/audio device with a HDMI cable. Audio Setup 1 2 3 Press . Select [Settings], then press OK. Select [Audio Setup], then press B. Video Setup Night Mode Off Audio Setup HDMI Audio Auto Preference Setup Digital Audio Auto EasyLink Setup PCM Downsampling On Advanced Setup Speaker Setup 4 5 Select an option, then press OK. Select a setting, then press OK. • To return to the previous menu, press BACK.
Option Description [Layout] • Activates the test tone for speakers and subwoofer. [Speaker Distance] • Sets the delay time for the subwoofer, centre or rear speakers if they are placed closer to the listening position, so that the sound output from all speakers reach the listening position at the same time. [Speaker Volume] [Frequency] • Sets the volume level of each speaker and subwoofer to get the ideal audio balance. • Sets the speaker size for [Front (L+R)], [Center] and [Rear (L+R)].
[Parental Control] Restrict access to discs that are unsuitable for children. These types of discs must be recorded with ratings. To access, enter your last set password or ‘0000’ using the keyboard on the TV. Note • Rated discs above the level you set in [Parental Control] require a password to be played. • The ratings are country-dependent. To allow all discs • to play, select ‘8’ for DVD-video and BD-Video. Some discs have ratings printed on them but are not recorded with ratings.
Press . Select [Settings], then press OK. Select [EasyLink Setup], then press B. • [On] – Enables one-touch play feature. • [Off] – Disables one-touch play feature. Video Setup EasyLink Audio Setup One Touch Play On Preference Setup One Touch Standby On EasyLink Setup Advanced Setup 4 5 Select an option, then press OK. Select a setting, then press OK. • To return to the previous menu, press BACK. • To exit the menu, press .
[Network] Sets up connection to external network for software download and BD-Live applications. It guides you through a step-by-step network installation procedure. Advanced Setup 1 2 3 Press . Select [Settings], then press OK. Select [Advanced Setup], then press B.
English [DivX(R) VOD Code] Displays the DivX® registration code. Tip • Enter this player’s DivX registration code when you Adjust settings rent or purchase video from www.divx.com/vod. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered. [Version Info] Displays the software version of this player.
7 Additional information Update software To check for new updates, compare the current software version of this player with the latest software version (if available) at the Philips website. 1 2 3 Press Select [Advanced Setup] > [Version Info], then press OK. Prepare the network connection, see chapter ‘Getting Started’ > ‘Set up network’ for detailed information. 2 At Home menu, select [Settings] > [Advanced Setup] > [Software Download] > [Network]. 36 Go to www.philips.
• Speci cation and design are subject to change Main Unit • without notice. Playback media • BD-Video, DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL, CD-R/CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD, WMA-CD, DivX (Ultra)-CD, USB ash drive Compatibility: Hi-Speed USB (2.
8 Troubleshooting Warning! • Risk of electric shock. Never remove the casing of this player. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this player, check the following points before requesting service. If the problem remains unsolved, register your Blu-ray disc player and get support at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your Blu-ray disc player.
No audio output from the loudspeakers of the audio device (home theatre system/ampli er/ receiver). • Ensure that the audio cables are connected to the audio input of the audio device. • Turn on the audio device to its correct audio input source. DivX video les cannot be played. • Ensure that the DivX video le is complete. • Ensure that the le name extension is correct. No 5.1-channel audio from the loudspeakers of the audio device. • Ensure that the disc contains 5.1-channel audio.
9 Glossary Aspect Ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, which the ratio of a high-de nition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. AVCHD AVCHD is a new format (standard) for high de nition video cameras that can be used to record and play high-resolution HD images.
LAN (Local Area Network) A group of linked devices in a company, school or home. Indicates the boundaries of a particular network. Local storage This storage area is used as destination for storing additional contents from BD-Live enabled BD-Video. MP3 A le format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. With the MP3 format, one CD-R or CD-RW can contain about 10 times more data than a regular CD. PBC Playback Control.
© 2009 Koninklijke Philips Electronics N.V.