BDL4765EL V1.00 www.philips.
BDL4765EL Safety Instructions Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your display: Operation: • Keep the display out of direct sunlight and away from stoves or any other heat sources.
BDL4765EL Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids. • Consult a service technician if the display does not operate normally when you have followed the instructions in this manual.
BDL4765EL Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Use only an RF shielded cable that was supplied with the display when connecting this display to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE- CAUSING EQUIPMENT REGULATIONS.
BDL4765EL Electric, Magnetic and Electromagnetic Fields (“EMF”) 1. We manufacture and sell many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. 2. One of our leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. 3.
BDL4765EL China RoHS 中国电子信息产品污染控制标识要求 (中国RoHS法规标示要求) 产品中有毒有害物质或元素 的名称及含量 有毒有害物质或元素 部件名称 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr 6+) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 外壳 O O O O O O 液晶面板 X O O O O O 电路板组件 X O O O O O 附件 (遥控器，电源线，连接线) X O O O O O 遥控器电池 X O O O O O O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 GB/T26572-2011 标准规定的限量要求以下. X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572-2011 标准规定的限量要求.
BDL4765EL North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
BDL4765EL Restriction on Hazardous Substances statement (India) This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
BDL4765EL Table Of Contents 1. 2. 3. 4. 4.3. 4.4. 4.5. Unpacking and Installation........................................................1 1.1. Unpacking..........................................................................................1 1.2. Package Contents.........................................................................1 1.3. Installation Notes..........................................................................1 1.4. Installing and Removing Table Stands (optional).........2 1.
BDL4765EL 1. Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • After opening the carton, ensure that the contents are complete and in good condition. 1.2.
BDL4765EL 1.4. Installing and Removing Table Stands (optional) To install table stands: 1. Ensure your display is powered off. 2. Spread a protective sheet on a flat surface. 3. Grab the carrying handles and place the display face-down on the protective sheet. 4. After inserting the stand in the guide block, tighten the screws on both sides of the display. NOTE: The longer side of the stand should face the front of the display.
BDL4765EL 1.6. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard in North America. Protective Sheet VESA Grid Tabletop stand Table 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2.
BDL4765EL 1.7. Mounting in Portrait Position This display can be installed in portrait position. 1. Remove the table stand, if attached. 2. Rotate 90 degrees counter clockwise from the back side of display. The “ ” logo on rear cover should at the left side of the display. 90 90 NOTE: When installing the display on a wall, please consult a professional technician for proper installation. We accept no liability for installations not performed by a professional technician.
BDL4765EL 1.8. Operating Instructions of Edge Alignment Kit 1.8.1. Installing Edge Alignment Kit • Before install edge alignment kit, displays must be mounted to video wall frame correctly. • Using “Thumb Screw” for easy installing. • Using “Edge Alignment Kit-1” on adjacent four displays. 1 2 4 • Using “Edge Alignment Kit-2” on adjacent two displays. • Install the “Edge Alignment Kit-2” with 2 PCS of M4 screw.
BDL4765EL 2. Parts and Functions 2.1. Control Panel 9 MUTE INPUT 1 1 2 3 MENU 4 5 6 7 8 [ ] button 9 Use this button to turn the display on or put the display to standby. 2 [MUTE] button 4 -- When {SCHEDULE} is enabled, the light blinks green and red ] button in the On-Screen-Display menu.
BDL4765EL 2.2. Input/Output Terminals 25 23 21 24 2 5 1 1 3 4 DisplayPort video input / output. AC IN 15 16 IR IN / 5 17 IR OUT 18 19 7 20 9 21 LAN control function for the use of remote control signal from control center. 22 HDMI1 IN / 23 HDMI2 IN DVI IN 24 DVI OUT / VGA OUT 25 DisplayPort IN / KENSINGTON LOCK Used for security and theft prevention. 14 OPS SLOT Slot for installing the optional OPS module. DVI or VGA video output.
BDL4765EL 2.3. Remote Control 1 [ ] POWER button Turn the display on or put the display to standby. 2.3.1. General functions 2 [PLAY] buttons Control playback of media files. 3 1 4 14 5 ] HOME button [ ] LIST button No function. 6 15 [ ] [ ] [ ] [ ] NAVIGATION buttons Navigate through menus and choose items. 7 6 [ ] button Confirm an entry or selection. 7 8 [ Access the OSD menu. 4 5 ] SOURCE button Choose input source.
BDL4765EL 2.3.2. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the cover. Caution: The incorrect use of batteries can result in leaks or bursting.
BDL4765EL 3. Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) 3.1.1. Using COMPONENT video input Audio Out COMPONENT Out (YPbPr) DVD / VCR / VCD [R] [AUDIO IN] [L] [COMPONENT IN] (YPbPr) 3.1.2.
BDL4765EL 3.1.3. Using HDMI video input DVD / VCR / VCD HDMI Out [HDMI IN] 3.2. Connecting a PC 3.2.1. Using VGA input VGA Out D-Sub 15 pin Audio Out PC [VGA IN] [VGA AUDIO IN] 3.2.2.
BDL4765EL 3.2.3. Using HDMI input HDMI Out PC [HDMI IN] 3.2.4. Using DisplayPort input DisplayPort Out PC [DisplayPort IN] 3.3. Connecting Audio Equipment 3.3.1.
BDL4765EL 3.3.2. Connecting an external audio device Audio In [AUDIO OUT] 3.4. Stereo Amplifier Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a video wall. NOTE: Maximum 25 displays (5x5) can be used in a daisy-chain configuration. 3.4.1. Display control connection Connect the [RS232C OUT] connector of DISPLAY 1 to the [RS232C IN] connector of DISPLAY 2.
BDL4765EL Connect the [DP OUT] connector of DISPLAY 1 to the [DP IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 PC [DP] [DP IN] [DP OUT] [DP IN] Connect the [HDMI OUT ] connector of DISPLAY 1 to the [DVI IN] connector of DISPLAY 2. DVD / VCR / VCD DISPLAY 1 DISPLAY 2 [HDMI] [DVI IN] [DVI OUT] [DVI IN] 3.4.3. Analog video connection Connect the [DVI OUT / VGA OUT] connector of DISPLAY 1 to the [VGA IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 PC [VGA] [VGA IN] 3.5.
BDL4765EL NOTE: This display’s remote control sensor will stop working if the [IR IN] is connected. 3.6. IR Pass-through Connection DVD / VCR / VCD [IR OUT] [IR IN] (DVD / VCR / VCD) Remote Control (BDL4765EL) 3.7. Wire-connecting to Network If you connect this display to a home network, you can play photos, music and videos from your computer. See Play multimedia files via Local Area Network (Page 16) for more detail. INTERNET ROUTER [RJ-45] [RJ-45] PC To setup the network: 1.
BDL4765EL 4. Operation • {Movie}: Ideal settings for movies. • {Music}: Ideal settings for listening to music. • {Game}: Ideal settings for games. • {News}: Ideal settings for spoken audio, such as the news. 4.5. Play multimedia files via Local Area Network NOTE: T he control button described in this section is mainly on the remote control unless specified otherwise. 4.1. Watch the Connected Video Source See page ������������������������������������� for external equipments connection. 1.
BDL4765EL 3. Press [ button. ] HOME button, Then, choose Setup and press [ 8. Press [ ] ] button, then done. You can play photos, music and movies stored on a computer in your home network. To do so, you need to install recent media server software on the computer. A list of suitable media server software is available in the Help. Setup Internet Source 4. Choose Connect to network and press [ 12 ] button. 3 Done Play files from display 1. Press [ ] HOME button.
BDL4765EL 3. Set DMR as ON. • View network settings Off Network settings On To clear the list of offline media servers, press [ ] OPTIONS button. Then, choose Clear offline servers and press [ button. 4.6. Static IP configuration Digital Media Renderer - D... ] Play multimedia files from USB device 1. Connect your USB device to the USB port on the display. Network name Clear Internet memory USB 4. Set the name of your display. 2. Press [ button.
BDL4765EL Music options Slideshow options While you play music, press [ button to choose an option: ] OPTIONS button, then press [ ] • {Shuffle}: Enable or disable random play of tracks. • {Repeat}: Choose {Repeat} to play a track or an album repeatedly, or choose {Play once} to play a track once.
BDL4765EL 4. Now, you can see the web page. NOTES: • The Opera browser does not support FLASH format. • The browser is not a video source. It will not stay at the browser screen after you restart the display.
BDL4765EL 5. Change your settings 1. Press [ ] HOME button to display the OSD menu. 2. Choose Setup. Press [ Using the remote control: ] button. 3. Choose Quick picture and sound. Press [ 4. Choose Continue, then press [ ] button. ] button 5. Follow the on-screen instructions to choose your preferred settings. 5.2. Settings 1. Press [ ] HOME button, and go to Setup menu. 2. Choose Settings and press [ ] button. 5.2.1. Picture 1. Press [ ] HOME button to display the OSD menu. 2.
BDL4765EL • {Tint}: Change the colour balance. Advanced • • {Custom tint}: Customise colour balance setting. Only available if {Tint} {Custom} is chosen. {Video contrast}: Adjust video contrast. Access advanced settings to enhance your audio experience. • {Auto volume leveling}: Enable the reduction of sudden volume changes. • {Brightness}: Adjust screen brightness. • {Hue}: Adjust screen hue.
BDL4765EL 5.2.4. General settings Example: 5 x 5 screen matrix (25 displays) H monitors = 5 displays V monitors = 5 displays V monitors H monitors 1 2 3 4 5 6 11 7 12 8 13 9 14 10 15 16 21 17 22 18 23 19 24 20 25 Position Picture Menu language Sound Group ID Tiling Monitor ID General settings Eco mode Auto search Clock Scheduling Sleep timer EasyLink Local KB lock RC lock Frame comp. Menu language Choose to turn the frame compensation function on or off.
BDL4765EL 3. Set On time. Picture Menu language Sound Group ID Tiling Monitor ID General settings Eco mode Schedule 1 Status Schedule 2 Source Schedule 3 On time Schedule 4 Off time Scheduling Schedule 5 Schedule On 6 time Repeat modes Sleep timer Schedule 7 Auto search Clock EasyLink Local KB lock Playlist setting 00 : 00 Cancel Done RC lock 1. There are 7 schedule can be set. Go to Status and choose On. 4. Set Off time.
BDL4765EL 6. If {Source} {USB} is chosen. Go to Playlist setting. • 0001/0002 Photo {Lock all expect volume and power}: Disable all the keyboard function except the [ ], [ ] and [ ] button: RC lock Photo Choose to enable or disable the button function of the remote control. Video • {Unlock}: Enable the keyboard function. • {Lock all}: Lock all keyboard function. • {Lock but volume}: Disable all the keyboard function except the [ ] and [ ] button.
BDL4765EL Factory settings Reset all your customized settings to the factory defaults. 5.3. Network Settings 1. Press [ ] HOME button, and go to Setup menu. 2. Choose Network Settings and press [ ] button. View network settings Network settings Static IP configuration Digital Media Renderer - D... Network name Clear Internet memory View network settings View connected network status. Network settings {Network configuration}: Choose how this display should assign addresses to the network resources.
BDL4765EL 6. USB device compatibility USB Video Subtitle Formats (for language subtitles, etc.) Name MPEG-4 time-based text SAMI SubRip SubViewer Micro DVD File extension .ttxt .smi .srt .sub .sub or .txt Format XML HTML string-based string-based string-based USB Multimedia Formats File extension Container *.avi *.mkv AVI MKV *.asf ASF *.wmv ASF *.mp4 MP4 *.3gp 3GPP *.vro VRO VOB *.mpg *.mpeg PS *.ts *.trp TS Video Codec DivX 3.11/4x/5.1/6.0 XviD H.
BDL4765EL 7. Input Mode VGA Resolution: Standard Resolution Active Resolution H Pixels V Lines VGA 640 480 WVGA 720 400 SVGA 800 600 XGA 1024 768 WXGA WXGA SXGA SXGA WXGA WXGA UXGA HD1080 1280 1280 1280 1280 1360 1366 1600 1920 768 800 960 1024 768 768 1200 1080 Refresh Rate Pixel Rate Aspect Ratio Stand for Mode 60 Hz 72 Hz 75 Hz 70 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 25.175 MHz 31.5 MHz 31.5 MHz 33.75 MHz 40 MHz 49.5 MHz 65 MHz 78.75 MHz 79.
BDL4765EL 8. Pixel Defect Policy We strive to deliver the highest quality products and use some of the industry’s most advanced manufacturing processes whilst practicing stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable.
BDL4765EL 8.4. Dark Dot Defects Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: One dark dot 8.5. Two adjacent dark dots = 1 pair of dark dots Two dark dots, specifications defines the minimum distance between dark dots Proximity of Pixel Defects Because pixel and sub-pixels defects of the same type that are nearby one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects.
BDL4765EL 9. Cleaning and Troubleshooting 9.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
BDL4765EL 9.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the display is not switched on. 2. Make sure the power switch is switched on. 3. The selected input has no connection. 3. Connect a signal connection to the display. 4. The display is in standby mode.
BDL4765EL 10. Technical Specifications Display: Item Specifications Screen Size (Active Area) 47” (119.2 cm) LCD Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.5415 (H) x 0.5415 (V) [mm] Displayable colors 10bits(D),1.
BDL4765EL General: Item Specifications Power Input 100 - 240V ~, 50 - 60Hz, 5.5A Power Output 100 - 240V ~, 50 - 60Hz, 2.5A Power Consumption (Max) 250 W Power Consumption (typ.) 120 W Power Consumption (Standby & Off) <0.5W (RS232 in active) Dimensions (With Stand) [W x H x D] 1069.3 x 654.9 x 329.6 mm Dimensions (Without Stand) [W x H x D] 1069.3 x 612.8 x 69.2 mm Weight (With Stand) 19.9 Kg Weight (Without Stand) 18.2 Kg Gross Weight (Without Stand) 22.
2014 © Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
