B5 Soundbar speaker wireless detachable speakers and subwoofer wireless music streaming with Bluetooth User manual Manuale utente Příručka pro uživatele Gebruiksaanwijzing Brugervejledning Brukerhåndbok Benutzerhandbuch Instrukcja obsługi Εγχειρίδιο χρήσης Manual do utilizador Manual del usuario Manual de utilizare Käyttöopas Príručka užívateľa Mode d’emploi Användarhandbok Felhasználói kézikönyv Kullanım kılavuzu Always there to help you Register your product and get support at www.
B5_12_UM_V2.0.
1 Important Safety Care for your product Care of the environment Compliance Help and support 2 Your SoundBar Main unit Remote control Wireless portable speakers Wireless subwoofer Connectors 2 2 2 3 3 3 7 Wall mount your SoundBar 13 13 8 Product specifications 14 9 Troubleshooting 14 Wall mount English Contents 3 3 4 5 5 5 3 Connect and set up 6 Charge portable speakers 6 Pair up with subwoofer/speakers 6 Place speakers 7 Connect to TV 7 Connect digital devices through HDMI 8 Connect audio f
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Consumer Care to have the product checked before use.
Help and support Disposal of your old product and battery For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative. Follow the instructions on the website to select your language, and then enter your product model number.
c Remote control This section includes an overview of the remote control. a d / For Bluetooth on the main unit only: skip to the previous or next track. For Bluetooth on the main unit only: play, pause or resume. e BASS +/Increase or decrease bass on the main unit. b f Volume control • +/-: Increase or decrease volume. • : Mute or restore volume. c d g VOICE • Press to select voice clarity sound mode. • Press and hold to toggle on or off CLOSE TO ME (close to me) sound mode.
The SoundBar comes with two wireless portable speakers (left and right). ab Note English Wireless portable speakers •• If you press the button on the portable speaker, the portable speaker disconnects the main unit (or SURROUND ON DEMAND mode switches off). cde Wireless subwoofer The SoundBar comes with a wireless subwoofer. * The illustration above is for overview of the portable left speaker. a Reset key Press with a pin to reset the portable speaker to the default settings.
a AUDIO-IN Audio input from, for example, an MP3 player (3.5mm jack). b AUX-AUDIO IN L/R Connect to an analog audio output on the TV or an analog device. c DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. d (SERVICE) Connect a USB flash drive to upgrade software of this product (not for media play). 1 2 e DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device. f HDMI IN1 / HDMI IN2 Connect to the HDMI output on a digital device.
2 3 speakers. »» If the connection to the SoundBar is lost, the LED on the portable blinks in red and orange alternatively. Dock the portable left and right speakers into the main unit to pair up automatically. If the pairing fails, re-dock the portable speakers into the main unit. SUBWOOFER (subwoofer): Place the subwoofer at least one meter to the left or right of the TV. Leave about 10-centimeter clearance from the wall.
Note •• If your TV is not HDMI ARC compliant, connect an audio cable to hear the TV audio through your SoundBar. (see 'Connect audio from TV and other devices' on page 8) •• If your TV has a DVI connector, you can use an HDMI/ DVI adapter to connect to TV. However, some of the features may not be available. Connect digital devices through HDMI Connect a digital device such as a set-top box, DVD/ Blu-ray player, or games console to your SoundBar through a single HDMI connection.
Basic quality audio 1 Using an analog cable, connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device. DVD Step 1: calibrate the listening zone 1 2 3 4 Spatial calibration Spatial calibration is used to achieve the following convenience, and simultaneously optimizes surround sound experience for it. • Have freedom to place the portable left and right speakers (surround) according to your need.
Note •• Spatial calibration takes around three minutes. •• Surround sound improvement is only noticeable if the portable left and right speakers (surround) were improperly placed, or if there is strong surround effect in the music you play. •• If the portable left and right speakers are swapped in placement, during calibration L<->R is displayed for few seconds, then the calibration completes. •• During calibration, you may press CALIBRATION to cancel calibration, and the settings returns to the default.
Turn the auto volume on to keep the volume constant when you switch to a different source. It also compresses the sound dynamics, increasing the volume for quiet scenes and decreasing the volume for loud scenes. 1 Press AUTO VOL. to turn auto volume on or off. »» When auto volume is turned on, ON AUTO scrolls once on the display panel. »» When auto volume is turned off, OFF AUTO scrolls once on the display panel.
5 To exit Bluetooth, select other source. »» When you switch back to Bluetooth mode, Bluetooth connection resumes. • To break the current Bluetooth connection, press and hold on the remote control. Bluetooth on a single speaker You can use the portable left or the portable right speaker as a standalone Bluetooth speaker, independently from the main unit. 1 Press the button on the left or right speaker to switch to Bluetooth mode. »» The LED on the left or right speaker blinks.
You can reset this product to the default settings programmed at the factory. 1 In AUX mode, on the remote control press Volume-, BASS -, and TREBLE - in sequence within three seconds. »» When the factory settings restore is complete, the product automatically switches off and restarts. 6 Update software To get the best features and support, update your product with the latest software. What you need • A USB flash drive that is FAT-formatted. Do not use a USB hard drive.
8 Product specifications Note •• Specifications and design are subject to change without notice. Amplifier • • • • Total output power: 210W RMS (+/- 0.5 dB, 30% THD) / 168W RMS (+/- 0.
• • On the remote control, select the correct audio input. Make sure that the SoundBar is not muted. Reset your SoundBar to its factory settings (see 'Apply factory settings' on page 13). No sound from the wireless portable speakers. • Make sure that the wireless portable speaker is turned on. Press ON on the bottom of the wireless portable speaker. • Dock the wireless portable speakers into the main unit to charge the battery.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Digital Surround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
B5_12_UM_V2.0.
Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. B5_12_UM_V2.0 B5_12_UM_V2.0.
