Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 Risk of swallowing batteries 3 2 Your CD Soundmachine 4 Introduction What's in the box Overview of the main unit Overview of the remote control 4 4 5 6 3 Get started 7 4 Play 9 Prepare the remote control Connect power Turn on Turn off Play CD Play from USB devices Play from Bluetooth-enabled devices Play from an external device 7 7 8 8 13 6 Listen to FM radio 14 7 Other features 15 Tune to FM radio stations Store radio stations automatically Store radio stations ma
1 Important • • • • • • • • • • • • 2 Read these instructions. Follow all instructions. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or RWKHU DSSDUDWXV LQFOXGLQJ DPSOLÀHUV WKDW produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the unit. 2QO\ XVH DWWDFKPHQWV DFFHVVRU
Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Risk of swallowing batteries • • • • The product or remote control may contain a button cell battery, which is possible to be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion.
2 Your CD Soundmachine Introduction With this CD Soundmachine, you can: • listen to FM radio; • enjoy audio from discs, USB device, Bluetooth devices, and other external audio devices; • program the play sequence of tracks. 7KH XQLW RIIHUV \RX '\QDPLF %DVV %RRVW '%% DQG 'LJLWDO 6RXQG &RQWURO '6& WR HQULFK sound. What's in the box Check and identify the contents of the package: • Main unit • AC power cord • 5HPRWH FRQWURO ZLWK EDWWHU\ • Short user manual • Safety sheet 4 EN
Overview of the main unit a b c d q p e f g h o n m l i j k a FM antenna • Improve FM reception. i MODE • 6HOHFW D SOD\ PRGH UHSHDW RU VKXIÁH b j SOURCE • Select a source. • Headphone socket. c AUDIO-IN • Connect an external audio device. k d l DBB • Turn dynamic bass boost on or off. e f • Turn the unit on or off. • • Stop play. Erase a program. / TUNING +/• Skip to the previous or next track. • Tune to FM radio stations. • Search within a track.
Overview of the remote control c Source selector: CD, USB, TUNER, BLUETOOTH, or AUDIO IN Select a source. d a / e b c MUTE BT USB AUDIO IN CD TUNER o PAIRING d n e m REPEAT f l h / Search within a track. f ALBUM/PRESET / Select a preset radio station. Skip to the previous/next album. g DSC Select a preset sound setting. h SLEEP/BACKLIGHT Set sleep timer. Turn the back light on or off. SHUFFLE k i PROG Program radio stations. Program tracks in CD/USB mode.
3 Get started Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your apparatus. The model number and serial number are on the bottom of your apparatus. Write the numbers here: Model No. __________________________ Serial No.
Option 2: Battery power Caution • Batteries contain chemical substances, so they should be disposed of properly. Note • Batteries are not supplied with the accessories. 1 2 3 Open the battery compartment. Insert 6 batteries (type: R-20, UM-1 or ' FHOOV ZLWK FRUUHFW SRODULW\ DV indicated. Close the battery compartment. Turn on Press . » The unit switches to the last selected source. Tip • To select a source, press SOURCE repeatedly or the source selection buttons on the remote control.
4 Play Play CD 1 2 3 Press CD to select the disc source. Press OPEN•CLOSE to open the disc tray. Insert a disc with the printed side facing up, then close the disc tray. » Play starts automatically. Play from Bluetooth-enabled devices With this product, you can listen to audio from Bluetooth-enabled devices. Note • Gibson Innovations does not guarantee the compatibility with all Bluetooth devices.
Option 1: Pair and connect through NFC 3 1HDU )LHOG &RPPXQLFDWLRQ 1)& LV D technology that enables short-range wireless communication between various NFC compatible devices, such as mobile phones and IC tags. With the NFC function, data communication can be achieved easily just by touching the relevant symbol or designated location on NFC compatible devices. On your Bluetooth device, accept the pairing request with "PhilipsAZ700T". If necessary, input "0000" as the pairing password.
Disconnect the Bluetooth-enabled device • • • BT MUTE Press and hold PAIRING for 2 seconds; Disable Bluetooth on your device; or Move the device beyond the communication range. Connect another Bluetooth-enabled device Disable Bluetooth on the current device, and then connect another device. BT Clear Bluetooth pairing history Press and hold for 7 seconds to clear the Bluetooth pairing history.
12 EN
5 Play options Program tracks In CD or USB mode, you can program a maximum of 20 tracks. Control play In CD or USB mode, you can control play through the following operations. / / / REPEAT SHUFFLE Press and hold to fast-forward or fast-reverse the track during playback, then release to resume play. Skip to the previous or next MP3 album. Skip to the previous or next track. Start or pause play. Stop play. [ ]: Play the current track repeatedly. [ ]: Play all tracks repeatedly.
6 Listen to FM radio Store radio stations manually Note • You can program a maximum of 30 FM radio stations. Tune to FM radio stations Note 1 2 • For optimal reception, fully extend and adjust the position of the FM antenna. 1 2 Press TUNER/AUDIO IN repeatedly to select FM radio source. Press and hold / for 2 seconds. » [SEARCH] VHDUFK LV GLVSOD\HG » The product tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations.
7 Other features Set the sleep timer This unit can switch to standby automatically after a preset period. When the unit is turned on, press SLEEP repeatedly to select the sleep timer period (in PLQXWHV » When the sleep timer is activated, appears. To deactivate sleep timer: • Press SLEEP repeatedly until [SLEEP OFF] VOHHS RII LV GLVSOD\HG » When sleep timer is deactivated, disappears. Turn screen backlight on/off Press and hold BACKLIGHT for 2 seconds.
8 Product information Note • Product information is subject to change without prior notice. Search Selectivity Total Harmonic Distortion Signal to Noise Ratio 26dBf <3% >50 dBA Bluetooth Bluetooth Version Range Bluetooth Frequency Band V4.2 + EDR 10 m (Free space) 2.402 GHz ~ 2.
USB playability information Maintenance Compatible USB devices: • 86% ÁDVK PHPRU\ 86% RU 86% • 86% ÁDVK SOD\HUV 86% RU 86% • memory cards (requires an additional card reader to work with this DSSDUDWXV Supported formats: • 86% RU PHPRU\ ÀOH IRUPDW )$7 )$7 )$7 VHFWRU VL]H E\WHV • 03 ELW UDWH GDWD UDWH .
9 Troubleshooting Warning • Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. SKLOLSV FRP VXSSRUW :KHQ \RX FRQWDFW 3KLOLSV make sure that the device is nearby and the model number and serial number are available.
• For some devices, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of this unit.
10 Notice Any changes or made to this device that are not expressly approved by MMD Hong Kong Holding Limited may void the user’s authority to operate the equipment. Compliance Hereby, TP Vision Europe B.V. declares that this product is in compliance with the essential requirements and other relevant provisions the of Directive 2014/53/EU. You can Declaration of Conformity on www.philips.com/ support.
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. This apparatus includes these labels: Class II equipment symbol This symbol indicates that the apparatus has a double insulation system. The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, Inc. Note • The type plate is located on the bottom of the apparatus.
2021 © MMD Hong Kong Holding Limited. All rights reserved. Specifications are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product. AZ700T_12_UM_V2.