Always there to help you Register your product and get support at www.philips.
Release notes This version has the following updates compared with V2.0 version: • Max Output Power changes to Rated Output Power. • Operation Power Comsumption changes to 10W. • Dimensions changes to: 300 x 134 x 240mm. • The weight of the product changes to 1.5 kg.
Contents 1 Important Safety Notice 2 2 2 2 Your CD Soundmachine 4 4 4 4 3 Get started 6 6 7 7 4 Play 7 7 8 8 8 9 Introduction What's in the box Overview of the main unit Connect power Turn on Turn off Play a CD Play from an external device Play from USB devices Play tape Tune to FM radio stations 5 Play options 10 10 10 10 6 Product information Specifications Maintenance 11 11 11 7 Troubleshooting 13 Control play Program tracks Adjust sound EN 1
1 Important • • Safety • • • • • • • • • • • • 2 Read these instructions. Follow all instructions. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the unit.
Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol on a product means that the product is covered by European Directive 2012/19/EU. Inform yourself about the local separate collection system for electrical and electronic products. Follow local rules and never dispose of the product with normal household waste.
2 Your CD Soundmachine Overview of the main unit a e b f g h Introduction With this CD Soundmachine, you can: • listen to FM radio; • enjoy audio from discs, tapes, USB device, and other external audio devices; • program the play sequence of tracks. c d i j k p l q The unit offers you Dynamic Bass Boost (DBB) to enrich sound.
f • • Start or pause play. Press to wake up the unit from standby mode. g PROG • Program the play sequence of tracks. h MODE • Select a play mode. i Display panel • Display current status. j FM antenna • Improve FM reception. k + TUNING • Tune to FM radio stations. l • USB socket. m Source selector • Select a source. n + VOLUME • Adjust volume o AC~MAINS • Power supply socket. p AUDIO-IN • Connect an external audio device.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. AC~MAINS Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your apparatus. The model number and serial number are on the bottom of your apparatus. Write the numbers here: Model No.
Turn on 4 Play Switch the source selector on the main unit to FM/USB/AUDIO-IN/CD. »» When the source selector is in the AUDIO-IN/CD position, CD is displayed. Play a CD Switch to standby mode • The unit switches to standby mode automatically when there is no audio detected for over 15 minutes. • Press to wake up the unit from standby mode. Turn off Switch the source selector on the main unit to OFF. Note •• You cannot play CDs encoded with copyright protection technologies.
Play from an external device You can also listen to an external audio device through this unit. 1 Switch the source selector to AUDIO-IN/ CD. 2 Connect an audio cable (3.5mm, not supplied) to: • the AUDIO-IN socket on the unit. • the headphone socket on an external device. 3 Play the external device (see the device's user manual). AUDIO IN CD USB FM TAPE / OFF Note •• The AUDIO-IN socket is not for headphones.
AUDIO IN CD USB FM TAPE / OFF Tune to FM radio stations Note •• For optimal reception, fully extend and adjust the position of the FM antenna. 1 2 3 Switch the source selector to FM. Rotate TUNING to select a station. Repeat step 2 to tune to more stations.
5 Play options Program tracks In CD and USB mode, you can program a maximum of 20 tracks. Control play In CD mode, you can control play through the following operations. / Press:skip to the previous/next track PROG +VOLUME- ALBUM + MODE Hold:search within play, then release to resume play. Start or pause play. Stop play. Program tracks. Adjust volume. Skip the the previous or next album. Select a play mode. [ ]: Play the current track repeatedly. [ ]: Play all tracks repeatedly.
6 Product information Note •• Product information is subject to change without prior Tape deck Frequency response 125 - 8000 Hz (8 dB) - Normal tape (type I) Signal-to-noise ratio 35 dBA - Normal tape (type I) Wow and flutter ≤ 0.4% DIN notice.
• Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Clean the disc lens • After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good play quality, clean the disc lens with Philips CD lens cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.
7 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. •• •• •• Wait until the moisture condensation at the lens has cleared. Replace or clean the disc. Use a finalized CD or correct format disc. Poor radio reception •• Increase the distance between the unit and your TV or VCR. •• Fully extend the FM antenna. If you encounter problems when using this device, check the following points before requesting service.
Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. AZ328_12_UM_V3.