User manual

Programming tracks
You may store up to 20 tracks (MP3: 10
tracks) in the desired sequence. If you like,
store any track more than once.
1 In the stop position, press PROG to start
programming.
➜ Display shows P01 indicating the start of
the program. PROG flashes (See 4).
2 Press
∞ or § to select your desired track
number.
For MP3-CD: First press ALBUM + once
or more to find your album.
➜
“ALBUM” and the selected album number
will be displayed and flashed briefly
(See 3).
3 Press PROG to store the desired track.
➜ Display shows P02, indicating the next
program location available.
4 Repeat steps 2 to 3 to select and store all
desired tracks.
5 Press
2; to play the program.
➜ “PROG” is displayed.
Helpful hints :
– If you try to store more than 20 tracks (MP3:
10 tracks), no track can be stored and the
display will show flashing ---.
To erase a program
You can erase a program by:
– pressing
9 (twice during playback or once
in the stop position);
– selecting FM, MW or OFF position;
– opening the disc door.
➜ Display: “PROG” disappears. from the
display.
Different play modes:
REPEAT and SHUFFLE
(See 5, 6)
You can play the current track or the whole
disc repeatedly, and combine REPEAT modes
with PROGRAM.
REPEAT – plays the current track
continuously.
REPEAT ALL – repeats the entire CD/
program.
SHUFFLE – plays all tracks in random
order.
1 To select play mode, press MODE once or
more.
➜ The display shows the selected mode.
2 Press 2; to start playback if in the stop/pause
position.
➜ Disc playback will start automactically after
few seconds when shuffle mode is selected.
3 To return to normal playback, press MODE
repeatedly until the modes are no longer
displayed.
– You can also press 9 to cancel your play
mode.
Helpful hints:
– Shuffle play is not available in the program
mode.
CD/MP3 Player