User manual

English Controls/Power Supply
Supplied Accessories
– AC power cord
Top/front panels (See 1)
1 Source selector: CD/MP3 , FM , MW or
OFF
–
selects CD/MP3, FM or MW source of
sound
– power off switch
2 2; – starts or pauses CD/MP3 playback
§ ∞
– selects the next/previous track
– fast searches forwards/backwards
(press and hold the button)
PROG – programs tracks
9 – stops CD playback;
– erases a CD program
3 Display – shows the CD functions
4 MODE – selects different play modes:
e.g. REPEAT or SHUFFLE (random
order)
5 ALBUM + – For MP3-CD only: selects
albums
6 OPEN•CLOSE – opens/ closes the CD
door
7 TUNING – tunes to radio stations
8
VOLUME – adjusts volume level
Back/bottom panels (See 1)
9 Telescopic antenna – improves FM
reception
0 Battery door – open to insert 6 x 1.5V
R-14/ UM-2/ C-cells
! p – 3.5 mm stereo headphone socket
Helpful hints: The speakers will be muted
when headphones are connected to the set.
@ AC MAINS~ – inlet for power cord
CAUTION
Use of controls or adjustments or
performance of procedures other
than herein may result in unsafe
operation.
Power Supply
Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
Batteries (not included)
1 Open the battery door and insert 6 batteries,
type R-14, UM-2 or C-cells, (preferably
alkaline) with the correct polarity as indicated
by the "+" and "–" symbols inside the com-
partment (See 1).
2 Replace the battery door, making sure the bat-
teries are firmly and correctly in place.The set
is now ready to operate.