Always there to help you Register your product and get support at www.philips.
1 Important 2 Safety Notice 2 3 2 Your Wireless Hi-Fi Speaker 4 4 4 4 5 3 Prepare 6 Introduction What's in the box What else you need Overview of the main unit Download Philips AirStudio+ Lite to your smartphone or tablets Connect power and switch on 4 Connect AW5000 to your home Wi-Fi network Option 1: Set up wireless connection to a non-WPS router through an iOS device Option 2: Set up through a non-WPS Wi-Fi router and Android device Option 3: Set up wireless connection to a WPS router Option
1 Important i Do not expose the product to dripping / splashing water, rain or high humidity. j Keep this product away from direct sunlight, naked flames or heat. Safety Information for Europe: Know these safety symbols k Do not install near any heat sources such as radiators, heat registers, stoves, or other electrical equipment (including amplifiers). l Do not place any other electrical equipment on the product. m Do not place any sources of danger on the product (e.g.
This product complies with the radio interference requirements of the European Community. This product complies with the requirement of the 1999/5/EC directive. Modifications Modifications not authorized by the manufacturer may void user's authority to operate this product. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Environmental information All unnecessary packaging has been omitted.
2 Your Wireless Hi-Fi Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
a f MP3-LINK • Connect an external audio player through an MP3 link cable (not supplied). b g WI-FI SETUP button • Connect the device to a Wi-Fi network. English e ETHERNET • (Optional) Connect to a wireless router through an Ethernet cable (not supplied). Overview of the main unit h Screw hole for wall mounting Tip •• You can go to Appendix 1 for details about wall mounting (see 'Appendix 1: Mount the device onto wall' on page 28). c h g f e d a +/• Adjust volume.
3 Prepare Always follow the instructions in this chapter in sequence. Download Philips AirStudio+ Lite to your smartphone or tablets 1 (For iPod touch/iPhone/iPad users) Install Philips AirStudio+ Lite from Apple App Store, and then run the app. (For users of Android smartphones or tablets) Install Philips AirStudio+ Lite from Google Play Store and then run the app.
On the initial Setup page, tap Setup a new speaker. Connect power and switch on English 3 Caution •• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the device. •• Risk of electric shock! When you unplug the AC cord, always pull the plug from the socket. Never pull the cord. •• Before you connect the AC cord, make sure that you have completed all the other connections. 1 4 Read the power connection instructions on the app.
2 Connect the AC power cord to: • the AC IN ~ socket on the back of the device. • the wall power socket. »» The device switches on automatically. »» The power/status indicator blinks amber during boot-up. »» After a while, for first-time setup, the power/status indicator turns solid amber. AC IN 3 ~ Tap Next on the app screen to continue. Switch between normal and Eco power standby mode • To switch the device to normal standby mode, briefly press the power button/ indicator above .
To connect AW5000 to your existing home WiFi network, you need to apply your home Wi-Fi settings to AW5000. Choose your best setup method based on the preconditions listed below. Platform of your mobile device iOS Type of your WiFi router Non-WPS Other requirement No Android Non-WPS No Either iOS or Android Either iOS or Android WPS No Either You non-WPS have an or WPS Ethernet cable.
4 As instructed, briefly press WI-FI SETUP on the back of AW5000. »» The power/status indicator starts to blink amber and white alternately. 6 As instructed, exit the app, and then select Philips_Install from the list of available Wi-Fi networks. »» A new Wi-Fi network created by AW5000 will appear, with the network name (SSID) of Philips_Install. < 30S WiFi SETUP < 3S 5 Tap Next on the above app screen, and then read how to proceed with network setup.
Enter the password of your home Wi-Fi network, tap Done to finish input, and then tap Next. 11 Wait until the power/status indicator on AW5000 turns solid white. »» The following app screen appears. »» AW5000 is connected to your home Wi-Fi network successfully. * If your Wi-Fi password contains such special characters as #/:/;/', you need to change your password. 10 Name your speaker as you like, and then tap OK to connect AW5000 to your home Wi-Fi network.
Option 2: Set up through a non-WPS Wi-Fi router and Android device 1 2 4 As instructed, briefly press WI-FI SETUP on the back of AW5000. »» The power/status indicator starts to blink amber and white alternately. »» A new Wi-Fi network created by AW5000 will appear, with the network name (SSID) of Philips_Install. Before setup, make sure that your Android device is connected to your home Wi-Fi network. Select Standard SETUP and tap Next.
7 Wait until the speaker is found. 8 Enter the password of your home Wi-Fi network, and then tap Next. 9 Name your speaker as you like, and then tap OK to connect AW5000 to your home Wi-Fi network. English 6 Wait until the power/status indicator on AW5000 turns solid white. »» AW5000 is connected to your home Wi-Fi network successfully. Note •• After successful network setup, you can tap Rock n' Roll on the above app screen to get ready for music play directly.
Option 3: Set up wireless connection to a WPS router 1 3 As instructed, press and hold WI-FI SETUP on the back of AW5000. »» The power/status indicator blinks amber and green alternately. Select Wi-Fi PROTECTED SETUP and tap Next. WiFi SETUP > 4S 4 Press the WPS button on your home Wi-Fi router. WPS 2 Read the WPS setup instructions.
Wait until the power/status indicator on AW5000 turns solid white, then tap Next on the app screen.. »» The following app screen appears. »» AW5000 is connected to your home Wi-Fi network successfully. Option 4: Set up wired connection through an Ethernet cable English 5 Note •• If you use wired connection, you just need to select Speaker already setup on the initial Setup page (see 'Download Philips AirStudio+ Lite to your smartphone or tablets' on page 6).
5 Play 2 Search for an Internet radio station by its name or location, language etc. Note •• To stream music to the speaker via DLNA UPnP, use your favorite app from your smartphone or PC/Mac that supports DLNA UPnP. Listen to Internet radio stations through AW5000 1 16 Run Philips AirStudio+ Lite on your iOS or Android smartphone or tablet. EN 3 To tune to an Internet radio station, select and tap its name in the result list.
1 3 Tune to an Internet radio station and tap . »» A list of preset radio stations appears. 4 2 Tap a row in the list where you want to add the preset station. For example, if you want to assign preset number 2 to this station, tap the second row. »» A message pops up, in which the station name and preset number are shown. Tap OK in the message box to confirm. »» The station is added into your list of preset radio stations.
Create your favorite list 1 Tune to an Internet radio station. 3 Repeat the above procedures to add more favorite stations. To tune to a favorite radio station • Go to Favorite stations on the app screen and tap one of your favorite stations to start play. To delete a favorite radio station 1 2 18 Tap to add the station into your favorite list directly. EN Tune to the radio station and tap . »» The radio station if removed from your favorite list directly.
You can also listen to an external audio player through the device. 1 Connect an MP3 link cable (not supplied) to: • the MP3-LINK socket on the back of the device. • the headphone socket on an external audio player. 3 Use the controls on your audio player to control music play. English Play from an external device To switch to the MP3 link source manually: 1 2 Run Philips AirStudio+ Lite on your iOS or Android smartphone or tablet. Tap Services -> MP3 link to select the MP3 link source.
6 Upgrade firmware To improve the performance of AW5000, Philips may offer you new firmware for upgrade of your AW5000. Warning •• Always connect your AW5000 to AC power for firmware upgrade. Never power off your AW5000 during firmware upgrade. 1 2 3 4 5 20 Make sure that AW5000 is powered on and connected to the same Wi-Fi network as your smartphone or tablet. Make sure that your home Wi-Fi network is connected to the Internet.
Note •• Product information is subject to change without prior notice.
8 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
English Occasional breaking of music streaming Do one or all of the following: •• Move AW5000 closer to your Wi-Fi router. •• Remove any obstacles between AW5000 and your Wi-Fi router. •• Avoid using Wi-Fi channel which is overlapped by the nearby Wi-Fi network. •• Check if your network speed is fast enough (in cases where multiple devices share the same router, the wireless performance may be affected). Turn off the other devices connected to your home router.
9 Appendix 1: Mount the device onto wall 1 2 Find a suitable place on a wall and use a pencil to mark the chosen location with your purchased bracket. Follow the instructions supplied with the purchased bracket to drill holes as marked. Caution •• Risk of product damage! Always consult professional personnel to safely mount the product onto wall. Warning •• Risk of injury! Make sure that no supply ducts such as gas, water or electricity are harmed when you drill the holes.
LED color Blinking amber Solid amber White and amber alternately Green and amber alternately Solid white Blinking white Solid green Solid red English 10 Appendix 2: Understand meanings of LED colors Meaning The speaker is booting up or firmware upgrade is in progress. The speaker is not connected to any network. The speaker is in wireless setup mode, assisted by the AirStudio+ Lite app. Follow the set-up instructions on the app. Wireless setup by the WPS method has been triggered or is ongoing.
AW5000 Device Terms & Conditions of Use These Device Terms and Conditions of Use are a legal agreement between you and Gibson Innovations Limited , a Hong Kong company with a registered office at 5 Science Park East Avenue, Hong Kong Science Park, Shatin, New Territories, Hong Kong and its affiliated companies (individually and collectively “Gibson Innovations”). Terms and Conditions of Use Congratulations on your purchase of a AW5000 (“Device”).
Limitations on Access to Content Gibson Innovations does not guarantee access to any particular content. Gibson Innovations may, in its discretion, add or remove access to any content at any time. Gibson Innovations does not guarantee continued access to any specific online service provider. Gibson Innovations may, in its discretion, add or remove access to any specific online service provider. Rights in Content Content may be protected by copyright laws or other intellectual property or proprietary laws.
Warranty Disclaimer GIBSON INNOVATIONS MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, THAT THE DEVICE WILL MEET YOUR REQUIREMENTS OR THAT THE USE OF THE DEVICE WILL BE UNINTERRUPTED, TIMELY, SECURE OR FREE FROM ERRORS. GIBSON INNOVATIONS MAKES NO WARRANTY AS TO THE CONTENT CARRIED IN ANY STREAM.
FULL REFUND OF THE AMOUNT, IF ANY, THAT YOU PAID FOR THE SOFTWARE WITHIN 30 DAYS FROM THE DATE OF PURCHASE WITH PROOF OF PAYMENT. 1. Grant of License. This Agreement grants you a non-exclusive, nontransferable, non-sub licensable license to install and use, on the Device or a mobile phone or tablet, as applicable, one (1) copy of the specified version of the Software in object code format as set out in the user documentation solely for your personal use.
Agreement; or (ii) upon destruction of all copies of the Software and related materials provided to you by Gibson Innovations hereunder. Gibson Innovations’ rights and your obligations shall survive the termination of this Agreement. 6. Upgrades. Gibson Innovations may, at its sole option, make upgrades to the Software available by general posting on a website or by any other means or methods.
CONSEQUENTIAL, SPECIAL, INDIRECT, INCIDENTAL OR PUNITIVE DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS OR REVENUES, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, LOSS OF DATA, LOSS OF USE OR OTHER PECUNIARY LOSS, EVEN IF GIBSON INNOVATIONS OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Open Source Software Notice Those software identified from Gibson Innovations Limited contain the open source software details below. Please refer to the indicated open source licenses for the terms and conditions of their use. Linux Kernel v2.6.30.9 NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work".
* the Free Software Foundation; either version 1, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc.
* * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ ------------------------------------busybox v1.13 * Copyright (C) 1997 Theodore Ts'o. * * %Begin-Header% * This file may be redistributed under the terms of the GNU Public * License. ------------------------------------------libnl v1.
http://7-zip.org/sdk.html LZMA SDK is placed in the public domain. -------------------------------------squashfs v4.0 GNU GENERAL PUBLIC LICENSE Version 2 (see GNU General Public License (GPL) v2) --------------------------------------udhcp v0.9.9 # Copyright (C) 1999-2004 by Erik Andersen
---------------------------------------wireless_tools v25 * This files is released under the GPL license. * Copyright (c) 1997-2002 Jean Tourrilhes -----------------------------------------zlib v1.2.3 Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler This software is provided 慳 s-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.
-----------------------------------------------Opus v0.1.9 /* Copyright (c) 2002-2007 Jean-Marc Valin Copyright (c) 2008 CSIRO Copyright (c) 2007-2013 Xiph.Org Foundation File: opusdec.c Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -----------------------------------------------------------GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6.
permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
---------------------------------------------GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License.
reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12.
16.
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
2016 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. AW5000_10_UM_V3.